Specification:

Type: circular saw blade
Material: high speed steel
Shank: 1/8 '' (3.175mm)

Size: 1/8"(3.2mm), 7/8"(22mm), 1"(25mm), 1-1/4(32mm), 1-1/2"(35mm), 1-3/4"(44mm)

22mm x 0.6mm (36t)
25mm x 0.6mm (36t)
32mm x 0.7mm (36t)
35mm x 0.7mm (36t)
44mm x 0.8mm (72t)
50mm x 0.8mm (48t)

Features:

Machinable stainless steel pipe material.

After cutting, there are few burrs, the saw blade has good toughness, and the sawing life is long

Precautions:

-When installed, saw blade installed in the electric mill to be inserted in the end.
-Because the electric grinding speed is high, the saw blade is big, the clip will be less
likely to cause the pole to throw the bend even to break off.
-In the case to meet the requirements to make use of a small diameter of the blade and
low speed, speed should not exceed 20,000 rpm.
-Select the saw blade, the smaller electric mill, to choose the smaller blade.
-Saw smaller and more stable, too large saw blade prone to vibration, suitable for low-
speed use.
 
1set inchude:22mm+25mm+32mm+35mm+44mm+50mm Saw Blade + 1pcs Mandrel

Package Include:

1 set

Precautions for safe use:

When using this accessory, the saw blade must be clamped to the end. Since the center of gravity of the front end is much heavier, at high speeds, inertia will change the running track! Therefore, the pole must be clamped in place, otherwise the speed of the machine is high. The pole of the saw blade may be bent, causing unnecessary loss and injury. Thank you for your cooperation! Buying electric grinder friends, hope to use a saw blade with a smaller outer diameter; because the electric grinder is small and light in weight, the front half of the saw blade is heavy, and it will cause machine vibration at high speeds! Thereby affecting the accuracy of cutting! Of course it increases the risk of operation! Please: Users who buy saw blades must operate safely! Thank you all! ! !