PIR +12V Sensor Smart Light Switch IR Motion Detector
Description:
Widely used on the Motion-activated lighting
LED strips Security System, automatic sensory device and more.
This smart PIR switch can be used in corridors, closets, bathrooms, basements, warehouses, garages, automotive, cars, trucks, and other places to achieve automatic electrical control functions for DC type lights such as LED strips or bulbs. High and stable sensitivity, effectively save energy and money for you.
PIR(Passive infrared) Motion sensor is Pyroelectric device can detect human movement by detecting Infrared ray emitted by human body.
Automatic Induction: When people enter into the range of induction, it will output a voltage equal to input voltage, after the delay time, it will output 0V; during the delay time if motion detected, the delay time will reset, and start a new delay time.
Specifications :
· Color: Black
· Operating voltage：DC12V
· Load current：5A
· Delay range: Default setting is 15 Seconds, possible 2 to 360
· Detecting range : About 110 degrees cone angle
· Detecting distance: 4M-7M (10cm-7M adjustable)
· Output Mode: Inductive Output
· Trigger way : continuous triggering
· Sensor size: 36x36x27mm / 1.41x1.41x1.06inch (USB plug)
Features:
- PIR motion sensor can detect human movement by detecting infrared rays emitted by the human body.
- 110 degrees cone angle detecting range and detecting distance is up to 5-7m. High and stable sensitivity, effectively save energy and improve efficiency.
- Widely used on the motion-activated lighting, LED strips security system, automatic sensory device and more.
- 2-360 seconds adjustable delay time range for you to set before turning Off the switch.
- Output voltage is almost equal to the input voltage meaning very low voltage drop, low power consumption.
- Small size and compact so as to install it anywhere
- It detects human movement and turns On automatically.
- It turns off automatically after 15 Seconds (default) if no IR detected, but can be adjusted between 2 to 360 Seconds.
- 110 degrees cone angle detecting range and detecting distance is up to 5-7m. High and stable sensitivity, effectively save energy and improve efficiency
Specifications:
- Color: Black
- Operating Input voltage: +5V to +24VDC (wide voltage range)
- Working temperature: -20 °C ~ +38 °C / -4 °F to +100 °F
- Quiescent current: < 50uA
- Output current: 5A
- Trigger mode: Continuous trigger
- Output Mode: Inductive Output
- Delay range: Default setting is 15 Seconds, possible 2 to 360 seconds adjustable setting.
- Induction mode: passive
- Sensing angle: 120 degree cone angle
- Sensing distance: 5 to 7m , 16 to 23 ft depending on the installation location and environment
Package List:
- 1x PIR Motion Sensor Switch
- 1x Screw
- 1x double sided adhesive tape
While your system is powered up, using a small screw driver change this potentiometer and set for the needed delay. Try the timing by a motion and check the delay.
Thank you for looking and please see my other listed items.
