OX CNC Router Machine Kit 4 Axis Belt Driven CNC Milling Carving DIY Engraver
 
❤️+ Save This Seller to Enjoy a Menber Exclusive Coupon! 
 
OX CNC Mechanical Kit with Nema 23 Stepper Motors / No Motors
 
This CNC Router kit includes everything needed to complete the mechanical portion of the OX CNC Machine,
this includes four NEMA23 (175oz*in / 345oz*in) Stepper Motors and GT3 Pulley's/Belt.
  OX 详情页
 
Materials you can Mill/Cut/Carve & Engrave:
  • Aluminum
  • Hard Wood
  • Soft Wood
  • Oak
  • Plexi Glass
  • Delrin
  • HDPE
  • Foam
NWB full kit 详情页2
 
Specs of Nema23 (1.26N.m) Stepper Motor:
  • NEMA 23
  • Shaft Size: 1/4"
  • Step Angle: 1.8
  • Holding Turque: 1.26N.m
  • Rated voltage: 3.36V
  • Rated current: 2.8A
 
Specs of Nema23 (2.45N.m) Stepper Motor:
  • NEMA 23 (High Torque)
  • Shaft Size: 1/4"
  • Step Angle: 1.8
  • Holding Turque: 2.45N.m
  • Rated voltage: 3.6V
  • Rated current: 3A
 
Package Includes:
  • OX CNC Mechanical Kit
  • 4 x Nema23 Stepper Motor (Optional for Normal 1.26N.m or High Torque 2.45N.m or None)
  • Extrusions are new and M5 tapped as where it is necessary!
 
Please note: 
  • MDF Working Table, Spindle, Controller etc and other electronics are not included with this kit.
  • Any Mains power connections must be installed by a Licensed electrician or suitability qualified person!
 
Z Travel Explained:

To clarify the Z Travel distance, this is not the max cutting depth. Z travel is the distance downwards it can travel before hitting the  spoiler board supports.
This kit has a Z travel of 69mm, if you had a 12mm spoiler board, this will reduce the Z travel to 57mm.
In this case 57mm is maximum thickness of material that will fit on the machine.
 
To calculate the max cutting depth for a chosen piece of material it is:
 
Max Cutting Depth = Z travel – Material Thickness
 
For instance a setup with a 12mm spoiler board, the max Z travel is 57mm, if we wanted to cut into a material 30mm thick the max  cutting depth would be:
 
Max Cutting Depth = 57 – 30 = 27mm
 
This means with a 30mm piece of material we would not be able to cut the whole way through.
The max thickness that can be cut the whole way through is half the Z travel. So with a Z travel of 57mm, we could cut the whole way through a piece of material 28.5mm thick.
 
 
Display:
 

005

 
 
001 (2)
 
" V-Slot " and " C-BEAM " are registered trademarks of OpenBuilds LLC as released under the Creative Commons Licence "Attribution-ShareAlike"
All our components are designed to work and are fully compatible with the products produced by OpenBuilds.
 
 

                      ------------------------------------------ Part List -----------------------------------------

OX5075+7575

OX7510+1010

OX1015+1515

 
 
 

 

 
 
Technical Specification

Sizes

Footprint
500 x 756mm
750 x 756mm
750 x 1006mm
1000 x 1006mm
1000 x 1506mm
1500 x 1506mm

Working Area
320 x 525mm
570 x 525mm
570 x 775mm
820 x 775mm
820 x 1275mm
1320 x 1275mm

Z Height
65mm

Motion

Motors - 123.4N.cm (177.5oz.in) NEMA23 Stepper Motors X,Y & Z.
Wheels - Super Hard Polycarbonate Xtreme Solid V Wheels
X & Y - 6mm GT3 Timing Belts
Z - 8mm Tr8*8 4 Start ACME Lead Screw

Frame

Plates - Machined 6082 Aluminium, Black Anodised.
Extrusions - V-Slot Extrusions, 20x80mm Y-Axis. Dual 20x60mm + 20x40mm X-Axis.

Electronics

Controller - USB CNC Mach3 Controller, GRBL Firmware, Dual Y-Axis Stepper Drivers.
Power - 24V 350W Output, Switchable 110-220V Input.
Software - Universal G-Code Sender Windows/Mac Java Based.

 

 

 
PushAuction