Basic performance parameters
1. Use low-power dual-core 32-bit CPU, which can be used as an application processor.
2. The main frequency is up to 240MHz, and the computing power is up to 600 DMIPS
3. Built-in 520 KB SRAM, external 2MB PSRAM
4. Support UART/SPI/I2C/PWM/ADC/DAC and other interfaces
5. Support OV2640 and OV7670 cameras, built-in flash
6. Support picture WiFI upload
7. Support TF card
8. Support multiple sleep modes.
9. Embedded Lwip and FreeRTOS
10. Support STA/AP/STA+AP working mode
11. Support Smart Config/AirKiss one-click network configuration
12. Support secondary development
Application scenarios
1. Home smart device image transmission
2. Wireless monitoring
3. Smart agriculture
4. QR wireless recognition
5. Wireless positioning system signal
6. And other IoT applications
Parameter
|
Description
|
Working Voltage
|
4.75-5.25V
|
SPIFlash
|
Default 32Mbit
|
RAM
|
Internal 520KB+ 2MB PSRAM
|
Wi-Fi
|
802.11b/g/n/e/i
|
Bluetooth
|
Bluetooth 4.2BR/EDR and BLE standard
|
Supported interface
(2Mbps)
|
UART、SPI、I2C、PWM
|
Support interface
TF Card
|
Max. 4G
|
IO Port
|
9
|
Serial port rate
|
Default 115200bps
|
Spectrum range
|
2400-2483.5MHz
|
Antenna form
|
Onboard PCB Antenna , Antenna Gain 2dBi
|
Image output format
|
JPEG(Only OV2640 Support),BMP,GRAYSCALE
|
Packaging method
|
DIP-16
|
Transmit power
|
802.11b:17±2dBm (@11Mbps)
802.11g:14±2dBm (@54Mbps)
802.11n:13±2dBm (@MCS7)
|
Receiving sensitivity
|
CCK,1Mbps:-90dBm
CCK,11Mbps:-85dBm
6Mbps(1/2BPSK):-88dBm
54Mbps(3/464-QAM):-70dBm
MCS7(65Mbps,72.2Mbps):-67dBm
|
Power consumption
|
Turn off the flash:180mA@5V
Turn on the flash and adjust the brightness to maximum:310mA@5V
Deep-sleep:Minimum 6mA@5V
Moderm-sleep:Minimum 20mA@5V
Light-sleep:Minimum 6.7mA@5V
|
Safety
|
WPA/WPA2/WPA2-Enterprise/WPS
|
Operating temperature
|
-20 ℃~ 70 ℃
|
Storage environment
|
-40 ℃~ 125 ℃, < 90%RH
|
weight
|
10g
|
Package Include:
1x HK-ESP32-CAM-MB 5V WIFI Bluetooth Development Board USB to CH340G
Upgrade Version:
Introduction (1)
ESP32-CAM-Integrated CH340 WIFI Bluetooth development board OV2640 camera module Support manual and automatic download MICRO USB interface USB to serial port CH340
Product name: ESP32-CAM-CH340 camera module
Product model: HW-818
Working voltage: DC5V
Product size: 27*48.5*4.5mm (excluding pin header)
Product application: This module can be widely used in various IoT applications, suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It adopts DIP package and can be used directly by plugging in the bottom plate.
Format/Size |
QQVGA |
QVGA |
VGA |
SVGA |
JPEG |
6 |
7 |
7 |
8 |
BMP |
9 |
9 |
/ |
/ |
GRAYSCALE |
9 |
8 |
/ |
/ |
Introduction (two)
Program download
1. Download the software and set it up, select the program or burn the file
2. The module presses the FLASH button (to keep pressing), and then connect the module through the USB cable
MICROUSB port and computer USB port.
3. To download the software, select the correct download port and download it. When the program starts to download, you can release the FLASH button
Package Include:
1x ESP32-CAM-CH340 USB WIFI Bluetooth Development Board OV2640 Camera Module DIY