3D Printed Wall mount designed for the Kindle Fire HD10 & HD10 Plus, 11th Generation tablet released in 2021. Primarily intended as a dashboard for home automation systems such as Home Assistant.
Designed to use a readily available 90 degree USB-C Cable (UGREEN) and hide the cable from view. This is also available to add as an option to buy. Please note the mount is not designed to take advantage of the wireless charging capability of the 10 Plus - it will need to be powered via USB.
at' away from the wall, while allowing the USB cable to enter a wall box, completely hidden from view. The spacing also allows the charging cable to run down the wall in some surface mounted conduit (trunking) if required
Mounting holes are provided for direct attachment to both UK (60mm hole spacing) and US (83.34mm hole spacing) single back boxes with additional mounting holes for screwing directly to a wall if needed.
It is also possible to glue the spacer to the rear tablet frame and use command strips for less invasive method of wall mounting.
There is also an extension to the power button, allowing the tablet to be shut down/restarted while in the mount.
Tablet can be mounted in landscape or portrait orientation.
Dimensions (assembled frame): Height: 194mm | Width: 276mm | Depth: 14mm | Spacer Thickness: 5mm
What's included:
We do not supply screws or fixings.
A compatible USB cable is available as an option (right angle USB-C to standard straight USB-A).
Optional Legs
3D Printed Universal Legs designed to turn the tablet wall mount into a desk stand.
The legs attach to outer mounting holes of the rear frame of all of our wall mounts using 4mm countersunk screws.
Height of the tablet will vary depending on the size. These are only for use in landscape mode.
Legs are supplied the same colour as your choice of tablet mount and with suitable screws.
Dimensions: Leg thickness: 16mm | Height: 160mm | Depth: 110mm
Approximate Angle of Tablet: 115°
NOTES ON COLOURS & FINISHES
The front frame and power switch
will be printed in your chosen colour. The remaining parts (rear frame and
spacer) will either be printed in your chosen colour or using Natural
(uncoloured) filament depending on printer availability. This has no bearing on
the outward appearance as the spacer and rear frame are not visible when the
wall mount is assembled.
We print
the front frames on a textured bed which results in a light stippled texturing
of the front surface. This helps to break up any visible extrusion lines on the
surfaces and produces a very presentable finish. The nature of 3D printing does
mean lines may be visible under certain lighting conditions/angles. There may
also be very small imperfections on the side surfaces but these will be
extremely difficult to see at normal viewing distances.
We go to
great lengths to produce presentable 3D printed products and do not dispatch
anything we would not be happy to place on our own wall.
If you
have particularly exacting standards, you can apply paint finishes to the frames
to match your décor. Some hand sanding and filling may be required.
DO NOT USE POWER SANDERS – YOU WILL MELT THE SURFACE OF THE 3D PRINT!