Product Description

thunder 55
thunder 55
thunder55

Tips for New Who Have Little to No Experience with A Plasma Cutter:

  • Please spend some time cutting scrap pieces at beginning.
  • Please adjust the air regulator before use to prevent air leakage when the machine is in use.
  • Please select the correct current, torch speed, and air pressure for the thickness and type of metal you want to cut.
  • Please keep the torch tip clean and free from metal spatter.

thunder55

SUSEMSE
Package Included

  • PILOT ARC Plasma Cutter Machine *1;
  • P80 Plasma Torch *1;
  • Ground Clamp *1 (1.5M);
  • Air filter & regulator *1 (regulates 58~84psi);
  • Gas Hose *1;
  • Set of P80 consumables;

Non-Touch Pilot Arc Plasma Cutter THUNDER 55

Pilot Arc Ignition effectively cuts rough, painted, and rusty surfaces.

Widely used in repairing work, metal processing, site work, home DIY hobbies, workshops, etc.,

Ideal cutting thickness 10 mm, maximum cut up to 14mm.

You can cut stainless steel, alloy steel, mild steel, copper, aluminum, and other metal materials.

  • Portable & Easy Set Up
  • Built-in over-heat protection, over-voltage protection, under-voltage protection, and overheat protection
  • Save energy and High cutting speed, cutting smooth, continuous current regulation

Parameters

Input power voltage (V) AC 110/220V±15%, 50/60Hz
Output current range (A)20 - 55A
Efficiency (%)85%
Duty cycle60%
Power factor0.85
Air pressure range40-75PSI
Protection classIP21S
Insulation classF
Dimension (mm)470mm*260mm*370mm
Weight (Kg)8
Cutting thickness (mm)1-14mm

thunder55

thunder55

thunder55

thunder55

Digital Display

  • Digital display for easy control of voltage and current.
  • Over-current and air pressure light indicators for safety using.
  • Select specific currents for various thicknesses.
  • Power switch in front for effective operation

Fan Cooling Heat Dissipation

  • Powerful fans to keep your device cool, so it doesn't overheat and die
  • Ventilation design ensures even heat distribution, so the machine doesn't overheat in one spot.

Air Pressure: 40-75PSI

  • Easy to assemble and does not require any special tools.
  • Use enough Teflon tape and make sure Air Regulator is tightened properly.
  • and also the hose barb fitting to the back of the unit should be tightened properly as well.

Portable for Carry

  • Compact and lightweight (8kg) design - perfect for welders on the go.
  • Extremely ergonomic handle for optimal use and long-time working hours.
  • Portable, so you can create your artwork virtually anywhere you like.