180W 3000RPM 57 Integrated Servo Motor Bundle

This 180W 3000RPM 57 Integrated Servo Motor Bundle is available for Ultimate Bee CNC machine.

Part List：

• 1x 57HSE3N 3Nm Motor
• 1x HBS57 Stepper Motor Drive
• 3x 57 Integrated Servo Motor 180W 3000rpm
• 1x 6 core shielded cable (Z-Axis Encoder cable)
• 1x 4 core shielded cable. (Z-Axis Motor cable)
• 1x 4 core shielded cable (Z-Axis Driver Signal)
• 3x 4 core shielded cable (X, Y, A Driver Signal)
• 1x 2 core DC cable for motor driver to power supply (Z-Axis)
• 3x 2 core DC cable for motor driver to power supply (X,Y,A)
• 1x 4 Pin EDG through wall connector 1x 6 Pin EDG through wall connector

Specifications of 57 Integrated Servo Motor ：

• Model: IHSV57-30-18-36-01-BY
• Size: 52 x 76 x 148mm (2 x 3 x 5.8″)
• Applicable motor: for iHSV57-30-18-36
• Input voltage: 20~50V DC (Typical Value 36V)
• Power: 180W
• Shaft Diameter: 8mm
• Torque: 0.6NM
• Rated Speed: 3000
• Impedance: 0.53±10%Ω
• Continuous output current: 6A
• Speed response frequency: 50KHz
• Peak torque: 1.71
• Maximum pulse frequency: 250K
• Default rate: 9.6Kbps (Required external conversion interface)
• Cooling mode: Natural cooling or forced air cooling
• Typical applications: CNC, printing, laser, textile machine, etc

Specifications of 57HSE3N 3Nm Motor：

• Motor model: 57HSE3N
• Motor current: 3.5A 
• Output torque: 3N.m 
• Body length: about 132MM 
• Shaft diameter: 8MM, no keyway 
• Outletmode: single output shaft 
• Rated speed: 1000 rpm (no-load speed: 2000 rpm) 
• Outlet mode: two-phase four-wire (must be wired according to motor label) 
  
  
  
  
  
  

Specifications of HBS57 Stepper Motor Drive：

• Drive Model: HBS57 (Nema 23, for 57 stepper motor)
• Pulse Signal: 3.3V/5V/24V compatible. No string resistor required
• Voltage Range: DC16-70V (New Version: DC24-80, send in random)
• Subdivision Setting: 800-51200 subdivision

57 Integrated Servo Motor 180W 3000rpm 0.6Nm

Using Environment:

• As far as possible to avoid dust, oil mist and corrosive gases
• Working temperature: 0~+70℃
• Storage temperature: -20℃~+80℃
• Humidity: 40~90%RH

Protection:

• Peak value of over current action value 30A + 10%
• Overload I2t current action value of 300% 5S
• Overheating action value of 80
• Overvoltage action value 65V
• Action value of under voltage 18V

Features: 

① Full Closed Loop

• Precise position and speed control to meet the most demanding application requirements.
• Highly robust servo control can adapt to a wide range of inertial loads and frictional load changes.
• High resolution encoder provides accurate position accuracy.

② Low Heating / High Efficiency

• Adjust the current in real time according to the actual load conditions to minimize heat generation.
• The current is almost zero and no heat at rest.
• Close to 100% torque output capacity, maximizing the energy conversion rate in the most compact space, which is in low power-consumption and high efficiency.

③ Smooth and Accurate

• Based on the encoder space vector current control algorithm, it has excellent performance in the full speed range. Even at low speed applications, it can maintain a smooth and quiet operation.
• Ensure accurate positioning both during operation and at rest.

④ Exercise Monitoring

• For some applications where real-time motion has extremely demanding accuracy requirements, JMC servo debugging software provides a simple and practical tool for monitoring the actual trajectory.
• Can be used to monitor commonly used indicators such as actual speed and position error, as a rating system current actual performance.
• The interface of interactive monitoring and tuning can get the most optimized performance output as quickly as possible.

ALM and PEND Signal Output Ports