The controller can use 2 separate outputs or combine one output. If you have a fan and you want to control humidity and also the temperature at the same time with one fan. For example, if you want to turn on the fan when the temperature reaches 28C or humidity reaches 55%RH and turn off the fan when the temperature reaches 26C and humidity reaches to 45%RH, this controller can wire for this subject.

Technical Parameters:

Accuracy: ±1°C 0.1%RH

Power consumption< 3W

Temperature measuring range: -20 ° C ~ +80 ° C

Humidity measuring range: 00%RH～+100%RH

Sensors: Humidity and temperature sensor with 1m wire length

Power supply: AC 100-240V 

Output: 2 outputs with 10 Amp load 

Features:

2 relay with one sensor with 2 independent Output.

2 output (Temperature and Humidity). You can make it parallel or series with one output.

2 color display (red for temperature and blue for humidity).

Control temperature by setting the start and stop temperature setting values.

Control humidity by setting the start and stop humidity setting values.

Temperature and humidity calibration.

The setting starts, stop temperature, and humidity modes:

You can set the start and stop temperature and humidity values with this mode. The controller automatically recognizes the heating or cooling mode and also the humidifier or dehumidifier mode,

Heating mode: When the start temp value is less than the stop temperature.

Cooling mode: When the start temp value is higher than the stop temperature.

Humidifier mode: When the start humidity value is less than the stop humidity.

Dehumidifier mode: When the start humidity value is higher than the stop humidity.

Temperature and Humidity Calibration:

You can calibrate both temperature and humidity reading with this function. The value can be positive, negative, or 0  from -10 to 10.

One Set Included

• 1 x Humidity and Temperature Controller
• Sensor (Temperature and humidity sensor)
• 1 x Instruction Manual