SNES Style multiout port back panel with composite AV mod board prewired and ready to be installed.
Connector board, 3D Printed back panel, DC Jack, power LED and AV Mod board ONLY ! !
Please note that the NES IS NOT INCLUDED !
This 3D Printed back panel is printed using PLA filament and it is printed at normal speed to avoid any imperfections. I have other colors available, including RED, BLACK, SILVER and WHITE. This will avoid making holes on your console. I designed this panel and have installed it on Top Loaders for customers that want to get composite on their top loaders over SNES Style multiout connector. This is a self contained back panel with the composite Video amp prewired for DIY a kit.
The NES 101 (NES2 or TOP LOADER) is the improved version of the Nintendo Entertainment System (NES). It's redesigned smaller has cartridge port on top. These units are more reliable since it does not have the NES10 lockout chip and tend not to damage the game cart since no need to insert it and push down weakening the pins on the console and cartridge. Unfortunately, these models did not have the composite video or audio out (AV RCA OUT). But with this add-on board, you can add SNES Style Multi-out video port. All you need to do is remove the RF adapter and power connector and solder the wires from this edge connector with the composite video amp. The edge connector has all pins marked so you can simply solder the corresponding wire to the board.
If you do not feel comfortable installing this on your system, I also offer installation service that I add a video board and have audio out with a power led added to this as well. Please look at my other auctions if you are interested in that.
I include the following:
1 self-contained edge connector board with composite amp built in ( See pictures )
1 3D Printed back panel.
1 Pre-wired RED led ready to solder in.
1 power DC Jack 2.1MMx5.5MM same as NES original (if you have aftermarket power adapter might not fit please check before purchasing)
Link to step by step instructions (emailed to you).
If you have any questions I am also available by email and if need be by phone to walk you through the process if the pictures and step by step guide is not enough.
You will need the following tools (NOT INCLUDED).
Security Bit 4.5 mm (Gamebit) can be found here on eBay for around $3
Small Phillips screwdriver
Small flat head screwdriver
Soldering Iron (preferably with a small tip)
Solder sucker / Solder wick
Tin Solder
Drill
an NES 101 (NES2)
and Possibly a small file.
***Please note that the Nintendo modification should only be attempted by a person with adequate soldering skills and equipment. No warranty is expressed or implied.
I also offer many other services for retro consoles.
Examples:- LED Add on lights for all classic consoles.
- Repair Blinking NES consoles.
- RGB for PC ENGINE/Turbografx/N64/SNES mini/NES (with NESRGB board purchase)
- Region select for different types of systems.
- Sega Genesis S-Video add on and repairs
- and many many more
Also note that there are other services on ebay providing this type of add-on board. But keep in mind that I have over 80 video add on boards sold. When I started selling the video-add on boards those were no where to be found on ebay. So I saw the need and started making these for people to purchase. Buy with confidence just look at my feedback.
Assembled in the USA!Please feel free to email me if you have any questions.