eBay

OEM Ford Bolt For various 5.4L V8 3V SOHC EFI Gasoline Engines - See list below

1pc OEM Ford Intake Manifold Bolt - With this kit you will get 1 bolt with each purchase!

STOP: DO NOT OVER-TORQUE

TIP: Follow the correct toque sequence & torque rating for your manifold. They normally want you to install & torque it in at least 2 steps. Confirm the spec for your intake manifold.

FYI The maximum torque for a M6-1.0 bolt hardness 8.8, is only 7.8lb/ft (very little torque) Use a 1/4" torque wrench and torque in 2 steps.

From many of the Ford F150 Forums, the spec is as follows:

Torque in 2 steps, first step 18 inch pounds, 2nd step 89 inch pounds in a criss-cross pattern starting from the center and then out. Too much torque and the small M6 bolt will break.

This listing is for single bolt purchases. Change quantity at checkout if you want more than one (1=1pc, 2=2pc, etc.). Need more than listed? Just message me to check as we may have more on-hand.

We may also have more available in another listing with a 10PC kit if you need a complete set.

Contact me if you need more singles in this listing or for any other assistance.

If you need more than listed just contact me to check inventory. If available I will adjust for you accordingly.

Last of them in stock & more on the way.

Please see the details of this bolt size & dimensions below along with the compatible model fitments. May also fit many additional applications. Compare the specs to your bolt to determine if this bolt will be appropriate. Many times Ford will discontinue or replace a certain part number so substitute part is required.

This listing is for single bolts. Purchase 1 & you get one bolt, purchase 2 & you get 2 bolts, etc. Change the quantity before purchase. We carry 10PC sets in another listing and also more on the way from Ford.

Details:

Last of inventory in stock & more on the way from Ford with a short delay. If you see this message and you need more than we have listed, please contact us. We can expedite for you.

UPDATE: We also have another listing with 10PC sets of bolts available in another listing if you need a complete set

This listing is for single M6 bolt purchases.

Depending on your model year and design, you may have the aluminum crossover tube & thermostat housing. This bolt is not for the thermostat housing. You will need different (longer) bolts regardless of whether you have the newer 3V setup of the older 2V engine. Questions? Just contact me for assistance.

Also, earlier 5.4L 2V engines use a slightly larger M8 bolt. We carry those bolts in another of our listings.

Update: Now the listing has automatic quantity purchase discounts applied along with automatic shipping discounts applied.

Purchase 6 or more and get automatic upgrade to USPS Priority shipping. You can also select this option at checkout as well.

Dimensions / Specs:

M6 x 47.5mm x 10mm hex

Bolts are M6 x 48mm (approximate length) See the included pictures. Make sure this is the correct bolt you need before making your purchase. It is a special order set with just a short delay. They are specific to only certain Ford engines. Bolts are made in the USA.

A few in stock now & a new shipment on the way. Order now if you need this part & we will expedite for you!

Brand new OEM Ford hardened OEM intake manifold bolts for various Ford vehicles (trucks) with 3V SOHC EFI MOD gasoline engine. We have additional kits if you need the bolts that secure the COP (coil on plug) to the intake manifold. Various fitments see below. This kit only includes the intake bolts (10pc). Special order with a short delay. Read all details below.

We also have this bolt in 10pc sets that is setup for the V8-5.4L engines. a 12pc set for the V10-6.8L engines other listings. Contact me for assistance.

Partial Fitment List includes:

Ford Expedition 5.4L 2005-2014

Ford F150 5.4L 2005-2010 (additional F250, 350, 450, 550)

Lincoln Navigator 5.4L 2005-2014

Ford

F-150

2005-2010

6 Cyl 4.2L, 8 Cyl 4.6L, 8 Cyl 5.4L, 8 Cyl 6.2L

4AT 4R75E, 4AT AODEW/4R70E, 4AT AODEW/4R75E, 5MT M5R2-C, 6AT 6R80, Four-Wheel Drive (Part Time), Rear-Wheel Drive

Also fits some additional motor sizes including 4.6L F150 (see complete list below)

See fitment list below

Update: Normally we have them in stock. Listing has been created by one of our valued customers. When in stock they ship immediately. When on order we list 10 day delay but normally it will be much less that that. Contact me to check and confirm prior to your purchase. We also carry this kit configured for the 6.8L 10 cylinder 3V motor & a kit for the earlier 5.4L 2V motors (different bolts). I have uploaded some actual photos to show details including overall length.

This listing is for single bolt purchases of OEM Ford hardened metric bolts to mount the intake manifold on many 3V truck motors. These are the bolts that hold the intake to the heads. This bolt has the preferred small head (10mm hex) just the the originals. Current pictures are actual photos & a few just stock images. New pictures show measurements with overall length. This is a special M6-1.0 x 45mm, grade 8.8 hardened bolt with a rust resistant finish. We have seen many selling this bolt for more than $10 per bolt. If you are changing out your intake manifold (for the common coolant leaking issue) it is a great idea and piece of mind to replace as many of the old rusty bolts as possible. They will install much easier and help provide the important even torque across the manifold. Also if you found rust or corrosion in the threads, use a thread chaser or tap in threads in the head to clean out the threads before you reinstall.

Update:

TIP: Follow the correct toque sequence & torque rating for your manifold. They normally want you to install & torque it in at least 2 steps. Confirm the spec for your intake manifold.

FYI The maximum torque for a M6-1.0 bolt hardness 8.8, is only 7.8lb/ft (very little torque) Use a 1/4" torque wrench and torque in 2 steps.

From many of the Ford F150 Forums, the spec is as follows:

Torque in 2 steps, first step 18 inch pounds, 2nd step 89 inch pounds in a criss-cross pattern starting from the center and then out. Too much torque and the small M6 bolt will break.

Fitments for the intake retaining bolts include the following vehicles listed below. Ford lists man y engine options. This intake bolt fits other engine options but the quantity you need will differ. Pull one bolt & compare your bolt size first. We have uploaded actual pictures and also showing overall length. You may not need all 10 bolts. We are in the process of creating additional listings with the appropriate bolt count.

Ford	Expedition	2005-2014	8 Cyl 5.4L	4AT 4R70W, 4AT 4R75E, 4AT 4R75W, 4AT AODEW/4R75E, 6AT 6R75, 6AT 6R80, Four-Wheel Drive (Part Time), Rear-Wheel Drive
Ford	F-150	2005-2010	6 Cyl 4.2L, 8 Cyl 4.6L, 8 Cyl 5.4L, 8 Cyl 6.2L	4AT 4R75E, 4AT AODEW/4R70E, 4AT AODEW/4R75E, 5MT M5R2-C, 6AT 6R80, Four-Wheel Drive (Part Time), Rear-Wheel Drive
Ford	F-250 Super Duty	2005-2017	10 Cyl 6.8L, 8 Cyl 5.4L, 8 Cyl 6.0L Diesel, 8 Cyl 6.2L, 8 Cyl 6.4L Diesel, 8 Cyl 6.7L Diesel	5AT 5R110W, 6AT 6R100, 6AT 6R140, 6MT M6HD-W , 6MT S6-650, Four-Wheel Drive, Four-Wheel Drive (Part Time), Rear-Wheel Drive, Two-Wheel Drive
Ford	F-350 Super Duty	2005-2017	10 Cyl 6.8L, 8 Cyl 5.4L, 8 Cyl 6.0L Diesel, 8 Cyl 6.2L, 8 Cyl 6.4L Diesel, 8 Cyl 6.7L Diesel	5AT 5R110W, 6AT 6R100, 6AT 6R140, 6MT M6HD-W , 6MT S6-650, Four-Wheel Drive, Four-Wheel Drive (Part Time), Rear-Wheel Drive, Two-Wheel Drive
Ford	F-450 Super Duty	2005-2017	10 Cyl 6.8L, 8 Cyl 5.4L, 8 Cyl 6.0L Diesel, 8 Cyl 6.2L, 8 Cyl 6.4L Diesel, 8 Cyl 6.7L Diesel	5AT 5R110W, 6AT 6R100, 6AT 6R140, 6MT M6HD-W , 6MT S6-650, Four-Wheel Drive, Four-Wheel Drive (Part Time), Rear-Wheel Drive, Two-Wheel Drive
Ford	F53 Stripped Chassis	2011-2017, 2004-2009	10 Cyl 6.8L	5AT 5R110W, 6AT 6R140, Rear-Wheel Drive
Ford	F-550 Super Duty	2005-2017	10 Cyl 6.8L, 8 Cyl 5.4L, 8 Cyl 6.0L Diesel, 8 Cyl 6.2L, 8 Cyl 6.4L Diesel, 8 Cyl 6.7L Diesel	5AT 5R110W, 6AT 6R100, 6AT 6R140, 6MT M6HD-W , 6MT S6-650, Four-Wheel Drive, Four-Wheel Drive (Part Time), Rear-Wheel Drive, Two-Wheel Drive
Ford	Mustang	2009-2010	6 Cyl 4.0L, 8 Cyl 4.6L, 8 Cyl 5.4L, 8 Cyl 5.8L	5AT 5R55S, 5MT T5OD , 5MT TR3650 , 6MT T56, Rear-Wheel Drive
Lincoln	Mark LT	2010, 2006-2008	6 Cyl 4.2L, 8 Cyl 4.6L, 8 Cyl 5.4L, 8 Cyl 6.2L	4AT 4R75E, 4AT AODEW/4R70E, 4AT AODEW/4R75E, 5MT M5R2-C, 6AT 6R80, Four-Wheel Drive (Part Time), Rear-Wheel Drive
Lincoln	Navigator	2005-2014	8 Cyl 5.4L	6AT 6HP26, 6AT 6R80, Four-Wheel Drive (Part Ti