These workshop Tool Nuts

"Air Arms Cylinder Filler Nut / Tool's"

These are designed to help you with the removal 

of the fill valve body from your Air Arms Rifle.

There are three (3) variations of Peg Nut Tools:

Air Arms 1/8" BSP Nut Tool: Is for the early S300 / S310 / RN10 & Pro-Traget models (Maybe the ODD early S400-S410) - Were the reservoir end cap has simply a 1/8" BSP Male Thread, Sticking out of the front of the air reservoir tube end plug, with a Fosters Fitting attached to it. The filler cap pushes on (Clips On) to the Foster Filler - 16mm Between Pin Centers.

Air Arms T-Bar Nut Tool: is for the newer rifles S400, S410, S500, S510, EV2, TDR, FTP900, Ultimate Sporter etc. were the air reservoir tube end plug has a screw on filler cover with either Fosters or More Often Air Arms own T-Bar Filler Connector.

The tools are steel with replaceable 3mm Dowel Pins, You can then clamp the 'Filler Nut Tool' in a vice or use a large spanner / adjustable spanner etc. and unscrew the end of the reservoir. Tool 'Pegs' to the fill valve body front (See Pictures) so that you can remove it for repairs / replacement. 

Air Arms S200 / CZ200 Nut Tool: is for the use in removing both Outlet Valve & Inlet Valve Housing from the Reservoir Tube. Suit's MK1-2-3 & Target CZ200

This is for use totally at your own risk!

Is this product available world wide?
"YES - WORLD WIDE 167 Countries - Select Air Mail Tracked Shipping"

PLEASE SEE OUR OTHER AIR ARMS ADVERTS FOR REGULATORS, TOOLS & SPARES.