******Listing For One Each Item Only*****
HPE PN/ R0K14A
HPE SPARE PART/ R0K14-61001
Aruba AP-387 (US) 802.11ac/ad 802.3at POE Dual 5/60 GHz Integrated Antenna Outdoor Radio |
R0K14A |
R0K14A HPE Aruba AP-387 (US) 5/60GHz Integrated Antenna Outdoor Radio HPE RENEW F/S .
NOTE: Power sources sold separately.
NOTE: Below Mounting Kit need order separately .
Remarks |
Description |
SKU |
|
AP-270-MNT-V1 AP-270 Series Outdoor Pole/Wall Long Mount Kit |
JW052A |
|
AP-270-MNT-V2 AP-270 Series Outdoor Pole/Wall Short Mount Kit |
JW053A |
|
AP-270-MNT-H1 AP-270 Series Outdoor AP Hanging or Tilt Install Mount Kit |
JW054A |
|
AP-270-MNT-H2 AP-270 Series Access Flush Wall or Ceiling Mount |
JW055A |
Notes: |
The H2 are most commonly used with AP-387. The H1 brackets provide additional tilt beyond the +/-17 electronic tilt provided by the AP-387. |
|
Condition : HPE Retail NEW OPEN BOX .
Below is HPE overview for Aruba 387 series Outdoor Access Points .
Aruba 387 Series Outdoor Access Points |
Dual 60GHz 802.11ad and 5GHz 802.11ac Wave 2 for high speed outdoor point-to-point connectivity Weatherproof and temperature-hardened, the Aruba 387 Series Access Points deliver multi-gigabit per second aggregate throughput at distances up to 400 meters (or 0.25 miles).
With the ever-growing number of IoT devices, demand for reliable connectivity is rising – not just in traditional carpeted enterprises but also in outdoor use cases such as enabling connectivity across buildings on the same campus, adjacent structures (e.g. parking garage or annex), and remote or temporary event sites.
Point-to-point wireless solutions offer an attractive option for connecting two sites together where the right of way is difficult to obtain – or as a backup or recovery link for existing connections. But legacy point-to-point solutions can be expensive and vulnerable to inclement weather conditions. They can also require highly skilled workers for AP installation and alignment.
To solve these challenges, the 387 Series AP is designed with the resiliency needed during inclement weather and to survive harsh conditions. The 387 Series AP can withstand up to 165 mph winds and tolerate water, dust, and salt sprays for extended periods of time, and also provide connectivity at up to 400 meters. Should weather cause the 387 Series to become misaligned, Aruba’s 60GHz radios can automatically adjust and align the point-to-point connection. The 5GHz radio is also bonded with the 802.11ad radio to provide: 1) a boost in throughput in good conditions, and 2) intelligent fallback if the 60GHz radio is impacted by heavy rainfall. |
|
|
Aruba 387 Series Outdoor Access Points |
|
Key Features · Cost-effective and easy-to-deploy with automatic radio alignment · High reliability with intelligent fallback to the 5GHz 802.11ac radio · Up to 3.37 Gbps of aggregate throughput (60GHz: 2.5Gbps and 5GHz: 867Mbps) · Up to 400 meters of extended range · IoT-ready with integrated Bluetooth Low Energy (BLE) · Based on a proven, hardened outdoor design · Participates in Aruba’s Dynamic Segmentation solution |
|
Features and Benefits |
Simple, cost-effective deployment From a deployment standpoint, the auto-adjustment feature can dramatically simplify labor requirements by eliminating the need for precision AP alignments during installation or weather impacts. APs can intelligently form links based on optimal parameters up to +/- 45 degrees azimuth* and +/- 17 degrees elevation. The 5GHz radio uses a fixed sector to cover the same range. |
|
IoT-ready Like all Aruba Wi-Fi 6 APs, the 387 Series includes an integrated Bluetooth Low Energy radio to simplify the deployment and management of location services, asset tracking services, security solutions and IoT sensors. This allows organizations to leverage the 360 Series as an IoT platform, which eliminates the need for an overlay infrastructure and additional IT resources |
|
Simple and secure access To simplify policy enforcement, the Aruba 387 Series uses Aruba’s policy enforcement firewall (PEF) feature to encapsulate all traffic from the AP to the Mobility Controller (or Gateway) for end-to-end encryption and inspection. Policies are applied based on user role, device type, applications, and location. This reduces the manual configuration of SSIDs, VLANs and ACLs. PEF also serves as the underlying technology for Aruba Dynamic Segmentation. |
|
Unique Benefits |
WPA3 and Enhanced Open Support for stronger encryption and authentication is provided via the latest version of WPA for enterprise protected networks. Enhanced Open offers seamless new protection for users connecting to open networks where each session is automatically encrypted to protect user passwords and data on guest networks. |
WPA2-MPSK MPSK enables simpler passkey management for WPA2 devices – should the Wi-Fi password on one device or device type change, no additional changes are needed for other devices. Requires ClearPass Policy Manager. |
|
VPN Tunnels In Remote AP (RAP) and IAP-VPN deployments, the Aruba 318 Series can be used to establish a secure SSL/IPSec VPN tunnel to a Mobility Controller that is acting as a VPN concentrator. |
|
Trusted Platform Module (TPM) For enhanced device assurance, all Aruba APs have an installed TPM for secure storage of credentials and keys, and boot code. |
|
Flexible operations and management Controller-less (Instant) mode - For enhanced device assurance, all Aruba APs have an installed TPM for secure storage of credentials and keys, and boot code. Mobility Controller mode - For optimized network performance, roaming and security, APs tunnel all traffic to a mobility controller for centrally managed traffic forwarding and segmentation, data encryption, and policy enforcement. Other management options - Available management solutions include Aruba Central (cloud-managed) or Aruba AirWave – a multi-vendor on-premises management solution. For large installations across multiple sites, APs can be factory-shipped and can be activated with Zero Touch Provisioning through Aruba Central or AirWave. This reduces deployment time, centralizes configuration, and helps manage inventory. |
|
Additional Features Zero Touch Provisioning - APs can be factory-shipped and zero-touch provisioned through Aruba Central or AirWave using a cloud-based service to reduce deployment time, centralize configuration, and manage inventory. Advanced Cellular Coexistence - Minimizes interference from 3G/4G LTE cellular networks, distributed antenna systems (DAS), and commercial small cell or femtocell equipment. Hardened, industrial design - Extends the temperature range capabilities of indoor access points for environments that lack heating and cooling. It also provides sealed connector interfaces to protect against dust and moisture |
|
Choose your operating mode Unified APs can be deployed with or without a controller (Instant mode). They can also be readily switched between Controller and Instant modes to accommodate for changing network needs. · Controller mode: When managed by Aruba Mobility Controllers, AP-387 offers centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding or, · Controllerless (Instant) mode: As a mesh extension in Aruba Instant mode, an AP-387 adds capability and reach for instant deployments. |
|
Other functionality includes: Aruba Activate significantly reduces deployment time by automating device provisioning, firmware upgrades, and inventory management for large installations across multiple sites. APs are factory-shipped to any site and configure themselves based on your desired mode as they power up. |
|
Ordering Information |
| |
Step 1: Select AP-387 Chassis |
| |
Remarks |
Description |
SKU |
|
AP-387 Series Unified Outdoor Access Points |
|
|
Aruba AP-387 (JP) 802.11ac/ad 802.3at POE Dual 5/60 GHz Integrated Antenna Outdoor Radio |
R0K12A |
|
Aruba AP-387 (RW) 802.11ac/ad 802.3at POE Dual 5/60 GHz Integrated Antenna Outdoor Radio |
R0K13A |
|
Aruba AP-387 (US) 802.11ac/ad 802.3at POE Dual 5/60 GHz Integrated Antenna Outdoor Radio |
R0K14A |
|
387 Series TAA Unified Outdoor Access Points |
|
|
Aruba AP-387 (RW) TAA 802.11ac/ad 802.3at POE Dual 5/60 GHz Integrated |
R4E10A |
|
Aruba AP-387 (US) TAA 802.11ac/ad 802.3at POE Dual 5/60 GHz Integrated |
R4E11A |
| ||
Step 2: Add mounting bracket |
| |
Remarks |
Description |
SKU |
|
AP-270-MNT-V1 AP-270 Series Outdoor Pole/Wall Long Mount Kit |
JW052A |
|
AP-270-MNT-V2 AP-270 Series Outdoor Pole/Wall Short Mount Kit |
JW053A |
|
AP-270-MNT-H1 AP-270 Series Outdoor AP Hanging or Tilt Install Mount Kit |
JW054A |
|
AP-270-MNT-H2 AP-270 Series Access Flush Wall or Ceiling Mount |
JW055A |
Notes: |
The H2 are most commonly used with AP-387. The H1 brackets provide additional tilt beyond the +/-17 electronic tilt provided by the AP-387. |
|
| ||
Step 3: Add POE powering accessories if needed |
| |
Remarks |
Description |
SKU |
|
Aruba PD-9001GO-INTL 30W 802.3at PoE+ 10/100/1000 Outdoor Surge Prot Intl Power Cord Injector |
JW701A |
|
Aruba PD-9001GO-NA 30W 802.3at PoE+ 10/100/1000 Otdr Surge Prot NA Power Cord Mdspan Injector |
JW700A |
|
Aruba PD-9001GO-DC 30W 802.3at PoE+ 10/100/1000 12-24V DC in Outdoor Surge Prot Midspan Injector |
JW630A |
|
Aruba PD-9001GR-AC 30W 802.3at PoE+ 10/100/1000 Ethernet Indoor Rated Midspan Injector |
JW629A |
| ||
Step 4: Add mounting kit for outdoor POE Midspan injector (optional) |
| |
Remarks |
Description |
SKU |
|
Aruba PD-MOUNT-OD Outdoor PoE Midspan Injectors Pole/Mast Mount Kit |
JW620A |
|
Step 5: Select 3-prong AC power cord for indoor POE injector |
| |
Remarks |
Description |
SKU |
|
PC-AC-ARG Argentina 220V AC 10A 2-meter AC Power Cord |
JW113A |
|
PC-AC-AUS Australian AC Power Cord |
JW114A |
|
PC-AC-BR Brazil AC Power Cord |
JW115A |
|
PC-AC-CHN China AC Power Cord |
JW116A |
|
PC-AC-DEN Denmark 220V AC 10A 2-meter AC Power Cord |
JW117A |
|
PC-AC-EC Continental European/Schuko AC Power Cord |
JW118A |
|
PC-AC-IL Israel 250V AC 10A 2-meter AC Power Cord |
JW120A |
|
PC-AC-IN India AC Power Cord |
JW119A |
|
PC-AC-IT Italian AC Power Cord |
JW121A |
|
PC-AC-JP Japanese AC Power Cord |
JW122A |
|
PC-AC-KOR Korea AC Power Cord |
JW123A |
|
PC-AC-NA North America AC Power Cord |
JW124A |
|
PC-AC-SWI Switzerland 220V AC 10A 2-meter AC Power Cord |
JW125A |
|
PC-AC-TW Taiwan AC Power Cord |
JW126A |
|
PC-AC-UK UK AC Power Cord |
JW127A |
|
PC-AC-ZA South Africa 250V AC 10A 2-meter AC Power Cord |
JW128A |
Notes: |
Outdoor power injectors ship with cable. |
|
| ||
Step 6: Spares/Optional items for AP-387 chassis |
| |
Remarks |
Description |
SKU |
|
Outdoor AP Covers and Glands 1-pk M25/5-pk M20 Cover/2-pk M16 Cover/5-pk M20 Gland/2-pk Ground Kit |
Q8N47A |
|
Outdoor AP Metric to Standard M20 to 1/2 inch NPT 5-pk Thread Adapter |
Q8N48A |
|
|
Notes: Maximum capability of the hardware provided (excluding antenna gain). Maximum transmit power is limited by local regulatory settings. |
Minimum Operating System Software · 8.4. AOS and 8.4 for Instant |
|
Warranty 30 days |
|
Power · Worst-case power consumption -13.5 W · Idle power consumption 4.5W · Power sources sold separately · Power over Ethernet (PoE+): 802.3at-compliant · Power over Ethernet (PoE): 802.3af with some operational restriction. - Max conducted power per chain for 5GHz drops to 19 dBm |
|
Certifications · CB Scheme Safety, cTUVus · UL2043 plenum rating · Wi-Fi Alliance certified 802.11a/b/g/n/ac |
|
Regulatory Model Number · AP-387: APEX0387 |
|
WI-FI radio specifications · AP type: Outdoor hardened, dual radio, 60GHz 11ad and 5GHz 802.11ac 2x2 MIMO · 60 GHz 802.11ad 1x1 (2502.5 Mbps max rate) radio - 1 Spatial Stream for up to 2.5 Gbps - Internal scanning antenna +/- 45° Azimuth Scan +/- 17° Vertical Scan · 5GHz 802.11ac 2x2 MU-MIMO (867 Mbps max rate) - Two spatial stream MIMO for up to 867 Mbps wireless data - Internal directional antenna 9 dBi · Software-configurable dual radio supports 5 GHz (Radio 0) and 60GHz (Radio 1) · Supported frequency bands (country-specific restrictions apply): - 2.400 to 2.4835 GHz (BLE) - 5.150 to 5.250 GHz - 5.250 to 5.350 GHz - 5.470 to 5.725 GHz - 5.725 to 5.850 GHz - 5.825 to 5.875 GHz - 57 to 64 GHz · Available channels: Dependent on configured regulatory domain. · Dynamic frequency selection (DFS) maximizes the use of available 5GHz RF spectrum. · Supported radio technologies: - 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) - 802.11ad: Single carrier (SC) · Supported modulation types: - 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM - 802.11ad: BPSK, QPSK · Transmit power: Configurable in increments of 0.5 dBm for 5 GHz · Maximum EIRP (limited by local regulatory requirements): - 60GHz band: 40 dBm EIRP max - 5GHz band: 387: 34 dBm EIRP · Maximum ratio combining (MRC) for improved receiver performance on 5 GHz. · Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance. · Short guard interval for 20MHz, 40MHz, 80MHz on 5GHz. · Low-density parity check (LDPC) for high-efficiency error correction and increased throughput. · 802.11ac Transmit beam-forming (TxBF) for increased signal reliability and range · 802.11ad Beam Steering · Supported 11a/ac data rates (Mbps): - 802.11a 6, 9, 12, 18, 24, 36, 48, 54 - 802.11n (5GHz): 6.5 to 600 (MCS0 to MCS15) - 802.11ac: 6.5 to 867 Mbps (MCS0 to MCS9, NSS = 1 to 2 for VHT20/40/80) · 802.11n high-throughput (HT) support: HT 20/40 · 802.11ac very high throughput (VHT) support: VHT 20/40/80/160 · 802.11ad · 802.11n/ac packet aggregation: A-MPDU, A-MSDU |
|
Mechanical · Dimensions/weight (excluding mount adapter): - -18 cm (W) x 18 cm (D) x 10.1 cm (H) - -1.198 kg |
|
Regulatory · FCC/ISED · CE Marked · RED Directive 2014/53/EU · EMC Directive 2014/30/EU · Low Voltage Directive 2014/35/EU · UL/IEC/EN 60950 · EN 60601-1-1, EN60601-1-2 Notes: For more country-specific regulatory information and approvals, please see your Aruba representative. |
|
Environmental · Operating: - Temperature: -40° C to +60° C (-40° F to +140° F) - Humidity: 5% to 95% non-condensing · Storage and transportation: - Temperature: -40° C to +70° C (-40° F to +158° F) · Operating Altitude: 3,000 m · Water and Dust - IP66/67 · Salt Tolerance - Tested to ASTM B117-07A Salt Spray 200hrs · Wind Survival: Up to 165 Mph · Shock and Vibration ETSI 300-19-2-4 |
|
Mounting · AP-270-MNT-V1 · AP-270-MNT-V2 · AP-270-MNT-H1 * · AP-270-MNT-H2 * Notes: *Recommended bracket solutions for most apps. |
|
Other interfaces · One 10/100/1000BASE-T Ethernet network interfaces (RJ-45) - Auto-sensing link speed and MDI/MDX - 802.3az Energy Efficient Ethernet (EEE) · Bluetooth Low Energy (BLE) radio - Up to 4dBm transmit power (class 2) and -91 dBm receive sensitivity · Visual indicator (multi-color LED): For system and radio status · Reset button: Factory reset (during device power up) · Micro USB console interface |