For Audio Technica AT3600L Phono Cartridge .
Applies to: Vinyl record player MM LP phonograph, LP60 310BT .Ruby cartridge and T4P cartridge are not applicable.
Specifications :
Output voltage: 4.2 mV .
Frequency response: 20Hz-20kHz .
Channel balance: 1.5dB .
Channel separation: 1kHz/10kHz:24/15dB .
Tracking force: 2 - 2.5 g .
Stylus type: Highly polished and shaped. 0006 inch conical diamond .
Stylus construction: Bonded round shank .
Dimensions: 25(L)*17 (W)mm .
Cartridge fixing hole distance: 10mm (measurement center distance is 12.5mm) fixed screw distribution .
The phono terminal has R+, R-, L+, L-.The color of the phono terminal wiring is: R+=red, R-=green, L+=white, L-=blue .
Description:
Gramophone needle is a worn-out product, and its normal service life is about 300-400 hours. Except for damage caused by careless operation, the use of excessive needle pressure, shoddy inferior records and severely shaking turntables will shorten the life of the needle tip. As the radius of curvature of the sharpened needle tip becomes larger, its ability to track high-frequency signals in the acoustic groove decreases. When the sound details are reduced, the treble is gradually poor, and the sound becomes more and more dull, you need to consider replacing the cartridge.
Most vinyl record players now use MM cartridges. The Audio-Technica Phono is basically universal. Just confirm whether it can be fixed to the arm frame of the phono. If the original phono is also using this one The head is even simpler, you only need to remove the needle for replacement, without the entire phono replacement.
Tips: The white part is broken down to separate the Phono and the Phone needle . When breaking, be careful to prevent damage to the gramophone needle.
Package:
1pcs.
