One (1) Set of Noisefighters SightLines Replacement Gel Ear Pads. Optional Adapter Plates Available. Free shipping included.

Check Compatible Headsets Listed Below Before Purchasing

  • Noisefighters Sightlines are upgraded gel ear pads that are the first with our patented concept (U.S. Patent No. 10,841,686 and U.S. Patent D0868025) with relief cuts for glasses to pass through without breaking the noise seal and causing headaches from increased clamping pressure.

  • Our latest design features a rim to slide under the clips on headsets like Impact® Sport and a non-permanent, pressure-sensitive adhesive for a much more secure fit and peel + stick compatibility with snap-in plastic adapter plates (available separately) to fit headsets from dozens of manufacturers.

  • Best results with straight-style glasses arms, and our super-soft and flexible silicone gel produces an amazing seal with other types of glasses arms.

  • Our unique horseshoe-ring shaped, grooved front face and 1/4" inch of silicone gel provide significantly better softness and sealing vs. competitors' pads.

  • When headset is lowered as much as possible, glasses arms can be dropped into relief cuts and will sit in a protected channel just above the ear. Using the relief cuts is completely optional. Our gel pads work like normal pads when glasses are not in use.

  • Use of super-premium acoustic memory foam and allowing for a closed head seal leads to impressively better sound deadening.

  • Designed by a Marine Corps combat veteran, made in the USA, and designed for use in any climate. Polyurethane outer skin is UV-resistant, waterproof, and much longer-lasting than vinyl used on cheap pads. These gel pads are tough. Plus, we warranty our pads for an entire year, regardless of what continent or climate you operated in.

  • Notice: take noise protection seriously. Hearing damage is permanent. Inspect your protective equipment before each use and ensure items are in good working order. Never use equipment that is damaged or degraded. If your ear pads are unable to completely seal the headset against your head, they must be replaced. In addition, we always recommend doubling up and wearing earplugs in conjunction with a headset for maximum noise reduction. If your headset is bumped out of place, the earplugs will still provide adequate protection.

    • SIGHTLINES™ STANDARD / UNIVERSAL GEL EAR PADS WITH PRESSURE-SENSITIVE ADHESIVE BACKING -- HERE ARE THE COMPATIBLE HEADSETS WITH NO ADDITIONAL ADAPTER PLATES NEEDED:

    This Sightlines gel ear pad model is fully compatible with many Howard Leight®, Peltor™, and Ops-Core™ headsets without any adapter plates. The adhesive is non-permanent and pads can be removed dozens of times, or even swapped between headsets, without degrading the bonding strength. With our adapter plates, you can use these same pads on an even wider selection of headsets. We use the same type of adhesive that is used on military headsets to hold pads in place. There is an outer lip on this pad that slides under the Howard Leight® headset retaining clips and provides a secondary method to secure the pads.

    -This model is also compatible with any headset that utilizes oval pads that are 4" tall x 3" wide and allow users to peel off / remove their original pads and apply new adhesive-backed pads. 

    -3M™ WorkTunes™ Wireless / Bluetooth model (please do purchase our Peltor™ HY79+ HY80 cloned adapter plates if you own the old-style WorkTunes™ headset that only has an AM/FM radio)

    -3M™ Peltor™ RangeGuard™

    -3M™ Peltor™ Sport Tactical 100 / 300 / 500

    -Awesafe® GF01

    -Axil® / Sportear® Trackr™

    -Caldwell® E-Max (standard and low-profile)

    -GLORYFIRE™ M8056T

    -Howard Leight® Impact® Sport (including Bolt® version)

    -Howard Leight® Impact® Pro

    -Howard Leight® Leightning®

    -Howard Leight® Sync®

    - Howard Leight® Verishield

    -Howard Leight® Viking®

    -Kask® SC1 / SC2 / SC3

    -Mpow® Noise Reduction Safety Ear Muffs

    -Ops-Core® AMP® (note: outer lip may overlap and need to be removed with knife / scissors, but this is only an aesthetic issue)

    -NoiseBuster® PA4000, PA4100, and PA4200

    -Peltor™ RangeGuard™, Sport Tactical™ 100 / 300 / 500

    -Pro Ears® - multiple models compatible; customer must verify that their original pads can be peeled off and our oval 3 x 4" pads can be glued on

    -Radians® - multiple models compatible; customer must verify that their original pads can be peeled off and our oval 3 x 4" pads can be glued on

    -TR Industrial® Forestry Safety Helmet and Hearing Protection System

    -Winchester® Passive Folding Earmuffs / Low Pro Passive Folding Earmuffs

    SNAP-IN PLASTIC ADAPTER PLATES FOR MOST WALKER'S GAME EAR® HEADSETS -- HERE ARE THE COMPATIBLE HEADSETS:

    -Walker's Game Ear® Razor™ Series (including SLIM and COMM BT and PATRIOT model but excluding the COMPACT version of the series)

    -Walker's Game Ear® Ultimate Power Muff (including Alpha and Quad version)

    -Walker's Game Ear® Ultimate Quad Connect

    -Walker's Game Ear® Ultimate Digital Quad Connect

    -Walker's Game Ear® Ultimate Digital Quad 4x4

    -Walker's Game Ear® XCEL™

    -ACTFIRE™ Safety Earmuffs (clone of Razor™ headset)

    SNAP-IN PLASTIC ADAPTER PLATES FOR MOST INVISIO® / SORDIN® / TCI® HEADSETS -- HERE ARE THE COMPATIBLE HEADSETS:

    -Invisio® T5™ (please transfer o-ring from original snap-in plates onto our plates if applicable)

    -Sordin® Supreme™ including all variants like Pro X (please transfer o-ring from original snap-in plates onto our plates if applicable)

    -TCI® Liberator™ / DEHP™ / HP™ (please transfer o-ring from original snap-in plates onto our plates if applicable)

    SNAP-IN PLASTIC ADAPTER PLATES FOR MOST PELTOR™ TACTICAL HEADSETS -- HY79 / HY80 CLONE -- HERE ARE THE COMPATIBLE HEADSETS:

    If your headset is not listed below but is compatible with the HY79 or HY80 hygiene kit, then it is guaranteed compatible with our model.

    OUR PELTOR™ HY79/HY80 MOUNTING PLATE CLONE DOES NOT FIT RANGEGUARD™, SPORT TACTICAL™ 100 / SPORT TACTICAL™ 300 / SPORT TACTICAL™ 500, OR THE WORKTUNES™ WIRELESS / BLUETOOTH MODEL. PELTOR™ MADE A NEW ADAPTER PLATE THAT LOOKS SIMILAR TO THIS ONE BUT IS NOT THE SAME SIZE. FORTUNATELY, PELTOR™ CHOSE TO MOUNT THEIR PADS TO THE UNDERLYING PLASTIC MOUNTING PLATES USING ADHESIVE, SO YOU CAN PEEL THE FOAM PADS OFF (IT TAKES FIVE SECONDS), CLEAN OFF ANY RESIDUE, AND THEN ADD OUR STANDARD / UNIVERSAL ADHESIVE-BACKED PADS TO THAT UNDERLYING PLASTIC MOUNTING PLATE.

    -3M™ Worktunes™ AM / FM (original model only, not Wireless / Bluetooth model; please read warning above and instead just order our Standard / Universal Mount pads with adhesive backing if you have the Wireless / Bluetooth model)

    -3M™ Peltor™ ComTac™ II / III / V / VI / XP / XPI

    -3M™ Peltor™ ProTac™

    -3M™ Peltor™ Shotgunner™

    -3M™ Peltor™ Sound-Trap™

    -3M™ Peltor™ Sport™

    -3M™ Peltor™ SportTac™

    -3M™ Peltor™ SWAT-Tac™ II / III

    -3M™ Peltor™ Tactical 6-S

    -3M™ Peltor™ TacticalPro™

    -3M™ Peltor™ Tactical Sport™

    -Racing Electronics® Platinum Plus headsets

    CLONE OF PELTOR™ HYX1 / HYX2 / HYX3 / HYX4/ HYX5 HYGIENE KIT SNAP-IN PLASTIC ADAPTER PLATES -- HERE ARE COMPATIBLE HEADSETS:

    If your headset is not listed below but is compatible with the HYX1, HYX2, HYX3, HYX4, or HYX5 hygiene kit, then it is guaranteed compatible with our model.

    -3M™ Peltor™ X1A

    -3M™ Peltor™ X2A

    -3M™ Peltor™ X3A

    -3M™ Peltor™ X4A

    -3M™ Peltor™ X5A

    CLONE OF PELTOR™ HY10 HYGIENE KIT SNAP-IN PLASTIC ADAPTER PLATES -- HERE ARE THE COMPATIBLE HEADSETS:

    If your headset is not listed below but is compatible with the HY10 hygiene kit, then it is guaranteed compatible with our model.

    3M™ Peltor™ 95 / 98 / 101 / 105 / III and Professional Model

    THIS PRODUCT IS PATENT PENDING & MADE IN THE USA by a factory supplier with over 40 years of experience making ear pads. Noisefighters is a service-disabled U.S. veteran owned company.