Features:   
200/100/60MHz bandwidths.   
1GSa/s Real Time sample rate.   
Large (7.0-inch) color display,WVGA(800x480).   
Record length up to 2M.   
Built-in Video Help.   
Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.   
USB host and device connectivity, standard.   
Multiple automatic measurements.   
Four math functions, including FFTs standard.   
Provides software for PC real-time analysis.   
|
Model | DSO5202BMV | DSO5102BMV | DSO5062BMV | Bandwidth | 200MHz | 100MHz | 60MHz | Real-time Sample Rate | 1GSa/s | Equivalent Sample Rate | 25GSa/s | Record Length(Sample Points) | Single-channel: Maximum 2M; Dual-channel:Maximum 1M (4K,16K,40K optional) | SEC/DIV Range | 4nS/div-40S/div (in a 2, 4, 8 sequence) | Delay Time Accuracy | 500ps | Vertical | A/D Converter | 8-bit resolution, each channel sampled simultaneously | VOLTS/DIV Range | 2mV/div~5V/div at input BNC | Position Range | ±50V(5V/div),±40V(2V/div~500mV/div),2V(200mV/div~50mV/div)±400mV(20mV/div~2mV/div) | | | Rise Time at BNC | ≤1.7ns | ≤3.5ns | ≤5.8ns | DC Gain Accuracy | ±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div ±3% for Sample or Average acquisition mode, 5V/div to 10mV/div | Trigger | Trigger Sensitivity (Edge Trigger Type) | DC: CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to Full EXT(Typical) 200mV from DC to 40MHz EXT/5(Typical) 1V from DC to 40MHz AC: Attenuates signals below 10Hz
HF Reject: Attenuates signals above 80kHz
LF Reject: Attenuates signals below 150kHz
Noise Reject: Reduces trigger sensitivity | Trigger Level Range | CH1,CH2: ±8 divisions from center of screen EXT: ±1.2V EXT/5: ±6V | Trigger Level Accuracy, typical (Accuracy is for signals having rise and fall times ≥20ns) | CH1,CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen) EXT: ±(6% of setting + 40mV) EXT/5: ±(6% of setting + 200mV) | Holdoff Range | 100ns-10s | Trigger Type | Edge | Trigger on the rising or falling edge | Pulse Width | Trigger (when >,<,=,≠) on positive or negative pulses Pulse Width Range: 20ns-10s | Video | Trigger on an NTSC, PAL, or SECAM standard video signal Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM) | Slope | Trigger (when >,<,=,≠) on a positive or negative slope Set Time: 20ns–10s | Overtime | from the rising or falling edge Set Time: 20-10s | Alternate | Internal trigger on edge, pulse width, video or slope | Measurement | Cursors | Manual: The difference between voltage cursors ΔV; the difference between time cursors ΔT; 1/ΔT calculated by Hz. Tracing: The voltage and time at a waveform point | Automatic | Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width | Display | Type | Right angle 7"TFT 16-digit color LCD | Resolution | 800*480 dots | Contrast | 16 gears, with the progress bar to show adjustment | Interface | USB host and USB slave | Power Supply | Voltage | 100-120VACRMS(±10%),45Hz to 440Hz,CAT II 120-240VACRMS(±10%),45Hz to 66Hz,CAT II | Power | <30W | Fuse | 2A, T rating, 250V | Mechanical | Size | Length: 313mm Width: 108mm Height: 142mm | Weight | 2.08KG (exclusive of packing and accessories) |
|
Software:   
Operating system: Windows 7, Windows NT, Windows 2000, Windows XP ,VISTA.   
|