Manufacture & Specifications
The Ash is carefully selected for strength and straightness
before being turned and machine spliced to the Rosewood butt
timber.
A Rosewood front splice and a Rosewood inlay between two red
veneers are then spliced to the butt section to further enhance the
appearance.
The cue is then turned to its final tapered finish before the
numerous sanding and finishing processes are undertaken to achieve
a 'silk smooth' finish.
To eliminate joint problems the two sections of the 'quick action'
joint are each precision turned from a single piece of solid brass
and fitted to ensure precise alignment of the Ash grain either side
of the brass collar.
The butt is finished with a Peradon Crown name disc and 'quick
action' butt end joint to accept the optional extensions on the
'related products' section of this page.
This cue features a solid brass ferrule and 9 ½ to 10mm Elkmaster
tip
Cue Length |
58" (147.5cm) Full Size |
Shaft Length |
28.5" (72.5cm) - plus 1" (2.5cm) for the protruding male joint |
Butt Length |
29.5" (75cm) |
Tip |
9 ½ to 10mm Elkmaster |
Shaft |
Selected kiln dried North American Ash* |
Butt |
Machine spliced Rosewood |
Butt Decoration |
Large Rosewood front splice and Rosewood inlay between two red veneers |
Joint |
Solid brass, 'Quick Action' in the center of the cue |
Butt End Joint |
Yes, Quick Action |
Weight |
From 16 ½oz up to 19oz |