LED HEADLIGHT H1 (HIGH BEAM)+H11B LOW BEAM
✿H1 High Beam
Product Specifications:
Bulb Type: H1
Power: 120w/set(60w/Bulb)
Lumens: 12000lm/set(6000lm/Bulb)
Color temperature: 6000K
Working voltage: 12V-24V DC
Light Color: White Light
Shell Color: Silver
IP Rate: IP67 Waterproof
Shell Material: Aluminum Alloy
Light Angle: 360 Degrees
Working Life: Over 50000H



LED Headlight Advantages:
LED lamps are more energy and power than conventional halogen lamps.
The brightness is close to the xenon lamp, but the LED lights are illuminated without delay to enhance road safety.
Instantly start without strong current impact, improve battery life by more than 30%.
Fast cooling , using the most advanced, heat-dissipating structural design.
The power driver adopts a wide voltage constant current mode which has a simple structure, so that the automobile can flexibly cope with various voltage unstable conditions, and has achieved the purpose of less component damage. Compared to HID ballast maintenance, The repair probability is very low which is less than 80%.
Low heating temperature, The working temperature of helium can reach 800°-1000°
LED headlight has a simple structure, and the parts are less than the xenon lamp, which is lower than the xenon lamp failure rate!
Car LED headlight color temperature are balancing. Xenon bulbs are clear in the same color, about 6000K.



✿H11B Low Beam
Product Specifications:
Bulb Type: H11B(12SMD)
Light Source: 3570*6 Cores
Number of lights: 2
Power: 40w/set(20w/Bulb)
Lumens: 4000lm/set(2000lm/Bulb)
Color temperature: 6000K
Working voltage: 12V-24V DC
Light Color: White Light
Shell Color: Silver
IP Rate: IP67 Waterproof
Shell Material: Aluminum Alloy
Light Angle: 360 Degrees
Working Life: Over 50000H


Product Features:
1. This product is made of 3570 lamp beads and consists of 12 with constant current.
2. This light source adopts imported chips with stable quality and long service life.
3. The power of this product is only 1/20 of the traditional halogen lamp, using more energy-saving and environmental protection.
4. This product is used by LED constant current drive, with stable performance and strict testing.
It is safer to drive on the car;
 

✿Package include:
2 x LED H1 High Beam Bulb
2 x LED H11B Low beam Bulb
 

✿Before buying:
-- Pls pay attention to the size of our LED bulbs.
-- Please pay attention to whether the installation location space is enough.
-- If you have any questions, please feel free to contact us.




✿Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.

DataCaciques