UHF 1W SHARI SA818 Ham Allstar Radio Interface Compatible Raspberry Pi 2/3/4 


hosted Allstar node hotspot





Description:


 SHARI (SA818 Ham Allstar Radio Interface) is a ham construction project designed by N8AR that implements a Raspberry Pi hosted Allstar node using a NiceRF SA818 embedded UHF (420 -450 MHz) radio module. SHARI is designed for construction and use in the amateur radio service by licensed amateur radio operators who can assure that their assembled SHARI kit meets FCC mandated operating requirements including RF frequency, deviation and required power levels at the fundamental and harmonic frequencies.


In order to create an Allstar node, SHARI plugs into two USB jacks on a Raspberry Pi2/Pi3 or Pi4 for power, the Allstar interface and radio programming (a short M/F USB extender cable can be used if desired).

Front panel LEDs indicate the status of SHARI – [POWER (green), USB Audio CONNECTION STATUS (blinking green), COS (green) and PTT (red)] . SHARI RF output power is 500 to 1000(default) milliwatts.

Features：


Works with a Pi2/Pi3 or Pi4 (USB connector positions swapped)
Uses the Cmedia CM119B or CM108B USB audio IC
Uses a NiceRF SA818 UHF or VHF embedded radio module
500 to 1000(default) milliwatts RF output power
Small, portable with self contained radio and antenna
Radio settings changed using a program running on the Raspberry Pi

 

Required Hardware:

1.A fully assembled SHARI Pi3U, Pi3V, Pi4U or Pi4V.
2.A Raspberry Pi 2, Pi 3 or Pi4 . The Pi2 or Pi3 is normally used with the SHARI Pi3(U) ,while the Pi4 is normally used with the SHARI Pi4(U)
3.A case for the Raspberry Pi. A metal case is preferred but if you want to use a WiFi connection instead of a wired network connection then a plastic case may be required to obtain adequate range.
4.A micro SD card – 16GB or larger, Class 10 or better is recommended.
5.A power supply for the Pi-This should be a power supply intended for the version of the Raspberry Pi. These supplies typically provide 5.1 to 5.2 VDC to the Pi. Current requirements vary with version. Numerous problems with Allstar Nodes have been traced to inadequate power supplies.

SHARI Allstar Node Setup and Configuration Guide (In short version)

1．Create an Account with Allstar
2．Create a Server and Request a Node number
3．Software
4．Configuring Allstar
5．Configuring SimpleUSB-Tune-Menu for SHARI
6．Connecting and Configuring SHARI
7．Setting Receive and Transmit Voice Levels
8．Testing DTMF Decoding
9．Enabling the COS LED

 







Shipping 
Item will be shipped out within 2 business days after receipt of your payment, we ship the item through hongkong Air mail or China Post.          We Ship to Worldwide, but Italy, Nigeria, Brazil will take long delivery time .
Before buying, Please make sure your address is correct. Or not, please correct it before payment
Ship to worldwide from Hong Kong within 12-24 hours after payment completed received, and will give you the tracking number asap. sometimes we will send it by flat post air mail if just one low price order.Hope you understand.
we advise shipping by DHL or EMS,and we have gave a discount for you,you can received it in 4-9 business days.
it takes about 15-30days usually if shipping by CHina/Hong Kong post air mail

Payment
        
We ONLY accept payment by Paypal.        
All payments must be received within 7 working days after auction has ended. Non-paying bidders will be reported to ebay.   


Feedback

If you have any questions or comments about our products or policies, please contact us by emails with your purchased item number.        
You also can contact us by leaving us an eBay message,we will be responded within 24hours.       
Customer satisfactory is most important to us. If you have a problem or question regarding your transaction please contact us before leaving any type of feedback.      
Negative feedback does not solve anything. We are always willing to work things out, thank you!   

      
Return Policy
     
Refunds are only offered for defective products reported within 7 days upon receipt       
Buyers need to return the defective item for the replacement at his own cost. Item must be returned by registered airmail to our requested address.  We do our best to serve each and every customer the best we can.     
if you need more items,we can provide you a wholesales price,you can contact us by message or email.