Fixing Dimension: 52mm
-Indicating Range: 0~999 (MPH, Knots, Km/h adjustable)
-You can switch unit between MPH(Mi), Knots(NMI) and Km/h (KM) by Backside Button
-Total Mileage Adjustable, Mileage Range: 0~99999.9 (Mi,NMI,KM available)
-Trip Counter
-Working Voltage: 9~32 V DC
Function:
1.Fuel Alarm ,Oil Pressure Alarm,MalfunctionAlarm
2.GPS Blind Area Odometer Compensation
3.OverSpeed Buzzer Alarm (Value Adjustable)
4.Operation Mode: LCD display, stepper motor
Speedometer Support Universal Car ,Boat
Wire Connection:
1.Red Wire --Positive （+）
2.Blue Wire--Negative(-)
3.Orange Wire --Neutral
4.Black Wire--High Beam
5.Purple Wire --Right Direction Light
6.White Wire ---Left Direction Light
7.Yellow Wire --Fuel Alarm
8.Grey Wire --Oil Pressure Alarm
9.Green Wire --Malfunction
Instructions
1 .Turn on , the meter start to search the signal and SOG will count automatically.
If there is still no GPS signal when it count to 300,the SOG displays ''E01'',indicating that the meter is searching the signal . When the SOG is flickering, indicating the GPS signal is lost.
2.Touch the back button of the meter, we can switch the unit:KNOTS,MPH,KM/H and save atuomatically.
3.Alarm setting: Hold the MODE button for 3 seconds to access into the setting mode:
TRIP: H000 ----All interface will be active when the high level input(Default)
H001 ----All interface will be active when the low level input
SOG:Speed Over Ground.
COG:(Course Over Ground): The moving direction relative tothe ground positionshowing clockwise direction relative to the north.
TRIP : Return zero when off electricity.
ODO : Accumulated, and never return zero when off electricity.
Fault Code :
E01 :indicate that is couldn't search any GPS signals whenin an energizedstate.
E02: indicate that it lose GPS signal .
E03 :indicates that there is a circuit problem.
Package Includes:
1x GPS speedometer
1x GPS Speed Sensor
1x Multi-plug socket
1x Installation Instruction
