eBay

leather color black, BMW, Audi, Mercedes, VW. Leather repair. Leather repair kit leather color for leather and imitation leather.

1) Leather degreaser 30ml
2) Liquid leather shades: neutral. 10ml
3) Leather color 50ml
4) Leather Sealant 30ml
5) Leather protector 30ml
6) 1 plastic spatula
7) 1 sanding pad
8) 2 disposable gloves
9) 2 sponges
10) 1 microfiber cleaning cloths

Dear customers,

as the computer monitor is not always able to display the correct tone of the colour, we ask that you be careful which color you purchase. As a tip, buy the right color based on the name and not what you visually see on the screen. The name of your desired color can be found at your bmw Find car salesman.

Important! Please make sure that you have purchased the correct color in the kit for repairing natural leather, vinyl and artificial leather for car interiors.First, carry out a test on an inconspicuous area of the seat, the steering wheel or any other element where you want to repair.Apply a thin layer, about 1-2cm and dry with a hair dryer, check if the color matches the leather.If it happens that the color does not match the leather - don't worry, we will exchange the color for you.

STEP 1

Before starting work, thoroughly clean the leather seats, the steering wheel and other elements of the interior of the car with products intended for artificial and natural leather. You must also dry the surface to be repaired

STEP 2

The leather, vinyl and natural leather must be degreased before beginning the repair and application of leather paint. Use the special leather degreaser included in the repair kit.

STEP 3

We recommend liquid leather to repair deeper scratches and tears on leather and imitation leather. Completely fill in the scratches and tears with liquid leather. Important: Do this in thin layers, layer by layer. Allow 10-15 minutes drying time between steps. For a better result, use the enclosed sponge for fine sanding after drying.

STEP 4

After the repair you can apply the paint. Proceed as follows: First apply a thin layer of paint with the sponge, then dry it with a hair dryer for 10-15 minutes. Proceed in the same way for subsequent layers, for the best result you should apply 3-4 layers. For use with spray guns or similar. you can dilute the paint with water, but not more than 10%.

STEP 5

After coloring, it is essential to apply a layer of leather sealant/protective varnish for leather. Not only does this act as a protective layer for the colour, but it also highlights it and offers a pleasant touch. Important: After you have finished working with the leather, you should let it rest for 24 hours and do not overexert yourself.

STEP 6

Leather protectant SRS, this is an excellent product for the ongoing care and protection of leather. With the help of our protectant, leather does not dry out, remains soft and retains its saturated color. Application should not take place earlier than 72 hours after repair and staining.