The Jake’s Custom Shop Clock and Musical Divider Module seeks to act as a stand-alone rhythmic timekeeper. An internal square-wave LFO operates as a clock source fed directly into an 8-Bit binary divider. Each divider output halves the previous output’s frequency. A clock signal can be divided up to 256 times. A Clock-in jack allows for synchronization to an external clock source.

-Square wave generator circuit with adjustable period by a potentiometer.

-Standard 555 Oscillator.

-Each output represents 1 digit in a binary number counting from 0 to 511.

-LED indicator on each output.

-8 available divisions plus a CLK THRU output.

-Operates on the rising edge of the clock signal.

-Internal clock frequency (Clock Through): 2Hz(min) to 200Hz (max)

-Divider output Voltage: 0V(min) to +12V (max)

Clock

1. Square wave generator circuit with adjustable period by a potentiometer. 

2. Standard 555 Oscillator.

Divider

1. The clock divider Version 3.1 is a musical counter. Each output represents 1 digit in a binary number counting from 0 to 511. 

3. LED indicator on each output.

4. 8 available divisions plus a CLK THRU output.

5. Musical Divider. Outputs are High on initial state.

6. Operates on the Rising Edge of the clock signal.

Inputs

 - Power: 10-Pin shrouded IDC.  Meets Doepfer Eurorack standard.

 - SLOW/FAST pot: Adjustment of internal clock speed.

 - CLOCK OVERRIDE: Overrides the internal or bus clock when a patch cable is inserted.  Inserting a patch cable that carries no signal will inhibit the divider.

Output

/2: Divides the clock by 2

/4: Divides the clock by 4

/8: “

/16: “

/32: “

/64: “

/128: “

/256: Divides the clock by 256.

Clock through: Clock output from the internal clock or Clock Override jack.

PCB dimensions: 39 x 100 mm

Panel dimensions: 40.3 x 128.5 mm (8HPX3U)

Depth of module: 15mm