The Latex-ite 4.75 Gal. Sand-Mix Driveway Coating is an asphalt emulsion based rubberized formula that contains fillers for traction control for filling hairline cracks in asphalt. It covers up to 400 sq. ft. Helpful Hints before you seal your driveway: 1. Buy an extra pail: Any unused portion Can be saved for touch-ups (You do not want to run out during the project as you might get color variations). 2. Flip pails overnight prior to doing job (It will be much easier to mix in the morning and will ensure consistency during application). 3. Do the project all at one time without starting and stopping. 4. Check the weather and make sure no rain is forecast and it is at least 55°F at night (A cold driveway will not allow the sealer to cure properly). 5. Check Latex-ite.com for further tips and how to videos.

• 2-year
• Coverage on smooth/previously sealed driveways 400 sq. ft. to 500 sq. ft.
• Coverage on rough/porous or unsealed driveways 300 sq. ft. to 400 sq. ft.
• Remember: clean your driveway thoroughly so sealer will bond and make sure you do not seal when it is cold outside, it must be at least 55° at night for sealer to properly cure and last
• Do not seal in early spring or late fall as the sealer will not last - it will not cure properly and may track
• 2-hour drying time
• Recommended for sealing and filling hairline cracks in asphalt driveways
• Low VOC, coal tar free, PAH compliant, soap and water cleanup
• Non-skid formula