Shipping by regular mail MAY be available. please message me.

Please message with your colour choice/s by refering to the colour chart. Please note the standard colour for these decals is black.

Each decal has transfer paper - it can be applied anywhere... and can be added to just about any smooth surface!

Please note that photos used in the posting are for display purposes only. To determine how many you need, create a one foot square with painters tape on your wall....use this area to figure out how many decals you would like in this area multple that by how many square feet your wall is. For example if you would like one decal in each square foot, a 7' x 9' wall would require 63 decals. You can also place decals randomly and not in a pattern -- what ever way you would like!

Oracal 631 decals stick to almost all flat surfaces. Please use the drop down menu to select your colour OR complete the personalization section.. Rebel Queen Decals are DIE-CUT decals and are hand made by me. The background color will be the color of the surface you place the sticker on, or clear on a window.

Rebel Queen Vinyl Decals come in 3 pieces:

Please note that Oracal 631 sticks best on smooth surfaces. I do not reccomend using them on freshly painted walls, uneven walls, Low VOC or scrubbable paint. (These paints have silicone and decals will not adhere)

1. Top layer is a transparent transfer tape. (Holds your decal together until it is applied)
2. Middle layer is your actual decal. (It is sandwiched between the Application Tape and the Wax Backing)
3. Bottom layer is the paper backing. (Protects the adhesive until the decal is ready to be applied)

Applying decals:
1. Do not apply on extreme cold or hot Surfaces. Ideal temperature must be between 60°F & 90°F.
2. Do not touch the adhesive backing, oils from your skin will prevent sticking.
3. Before applying decal make sure there is no wax or oily products on the surface and ensure the wall/surface is clean.

How to apply a decal:
1. Rub the decal (using a smooth item such as a credit card) to be sure the transfer tape is properly adhered to the sticker. (Front and back)
2. Clean and dry the desired area. Your decal will stick best to clean smooth surfaces.
3. Remove the paper backing slowly making sure it stays adhered to the transparent transfer tape.
4. Carefully position the decal to the desired area.
5. Rub decal from one side to the other, eliminating any air bubbles. Use the vinyl application card or a credit card to make sure it is fully adhered to the surface.
6. Slowly remove the transfer tape, making sure no part of the decal remains on the transfer tape.
7. Check for air bubbles. In most cases air bubbles can be worked to the edge of the sticker, but if not, a pin hole will allow the air out and become virtually invisible