Features:
1.Adopt "TUYA" everything becomes convenient and simple, can be remote control, let you master all the way to go!
2. Built-in battery design, no need to worry about replacing the battery.
3.APP button push, value for money
4.125 degree ultra-wide angle, the field of view is also more open
5. Doorbell support memory card, maximum TF card 64G, convenient for you to access
6.Two-way voice, with night vision function
Specifications:
Battery:400mAh.
Duration: about 3 months
Power input:5V-2A
Storage Function:TF card(Max. support 64G)(not include)
Recording range:5m
APP:Graffiti APP
System Support:Android4.3 or ios9.0 or above
Doorbell size:about 10.6*4.5*2.4cm
Doorbell weight:about 66g
Doorbell charging port: Android
Dingtone size: about 6*3.8*2cm
Tinkerbell socket: USB
Product colour: black
WIFI network: 2.4G
Installation steps:
The base of the doorbell with film, or punched with a dowel fixed to the wall, door and other locations that need to be installed, the purpose of the film is to fix the base of the doorbell, such as can be punched on the dowel installation will be more solid than with the film [the side of the base backplane with large holes to install the lower end of the small holes towards the top of the installation, please do not install dowel holes face upwards】!
When installing the doorbell, first snap the big hole at the lower end, and then press the doorbell into place.
Matching steps:
1. First plug the ding dong into the power, press the doorbell ding dong whether it will sound
2. Mobile phone scanning instructions to download APP, and then register the account
3. Open the mobile phone Bluetooth, enter the APP click to add equipment, click the search automatically add, appear doorbell click binding [focus: network 2.4G].
4.After adding successfully, you can use it.
5. Doorbell support TF card, the maximum support 64G, does not include memory cards, installed in the back of the doorbell under the rubber mat
6.Note: Tinkerbell powered up, press the doorbell Tinkerbell does not ring, please re-pair it, first Tinkerbell dialling power and then plugged in, press the function button on the Tinkerbell, look at the prompt light is blinking, press the doorbell, press the doorbell Tinkerbell rang, is the pairing success.
Product list:
Doorbell*1
Tinker Bell*1
Charging cable*1
Instruction manual *1