Precautions for DRSSTC use and operation instructions
1. This product is only suitable for Tesla enthusiasts, novices please be cautious when buying.
2. The weight of the product is 8 kg, and the logistics cost is expensive, so we do not recommend returning the product.
3. A safety distance of at least 2 meters for the large Tesla coil
The DRSSTC Tesla coil works in a strong magnetic field and a strong electric field.
Objects including wires, cables, and nearby electronic devices produce induced currents,
Large Tesla coil has a safety distance of at least 2 meters
4. If arcing test is required, the arcing distance should not be less than 50 cm. If the distance is too close, the switch will be damaged
5. There is a large-capacity energy storage device in the DRSSTC Tesla coil after it is powered off, there is still a margin of voltage,
6. The power supply is 220V AC. After plugging in the power supply, there will be a delay of about 3 seconds before turning on to control the arc extinguishing
Device,
7. Grounding requirements: It is forbidden to use the ground hole high-voltage products in the household electrical three-hole socket, which is easy to produce high-voltage network and cause equipment damage
Use a half-meter-long iron bar to drive it into the ground about 40 cm and make a good connection with the grounding wire of the secondary coil. This method is a standard grounding method, 3 other convenient grounding conditions are not given to ensure the normal operation of the machine, and it is a second-class grounding method. For example, fire pipes, lightning protection lines. In order to ensure the normal operation of the machine without damage, please operate according to the required standard grounding method.
8. Arc extinguisher
High electrostatic charges will accumulate and have certain dangers. Remember not to touch the secondary surface with your hands directly after work to prevent electrostatic shock.
9. Assemble the whole machine as required, check whether the wiring is correct, and then turn on the power and wait for about seconds.
"If you use the music mode, hit the music file. Plug in the audio device and the green light of the arc extinguishing controller will flash with the rhythm of the music. At the same time, an arc will be emitted with the rhythm of the music. If the arc is shorter, you can slowly increase the pulse width knob and the arc will be about 60 cm.