Push Up Breast Boob Tape Adhesive Breast Lift Nipple Cover Sticky Bra Tape Set

In addition, if for some reason you fear that your skin is extremely thin and sensitive, you can first test it. By doing so you ensure that you don’t have allergies to the tape and that your skin isn’t extremely sensitive.

You can test the skin by applying a very small patch of boob tape (1 inch by 1 inch is enough) on your breasts (or on your arm even) and keep it for 24 hours (or as long as you expect to wear the boob tape for). If there’s no reaction when you remove the patch, you can feel safe using more boob tape on your breasts.

On the other hand, if the skin is irritated or red, it’s probably best not to use that particular brand of boob tape. In that case, it’s probably best to look for a hypoallergenic and latex-free boob tape.

 

Vertical Strips Style: 

 Can be used with: backless dresses, low cut dresses, in some variations with strapless dresses

 With the vertical strips method, you vertically apply 2-4 strips on each breast, lifting them upwards and inwards. 

Step 1: Regardless of the method you’re using to tape your breasts, the first step is the same. It involves applying nipple covers or pasties on your nipples, which are the most sensitive part of your breasts.

While this step is not mandatory, it’s definitely highly recommended. Not only does it protect the sensitive nipples, but more importantly, it makes removing the boob tape a painless experience.

Extra tip: If you don’t have nipple covers or pasties handy, even cotton pads will do fine – it’s definitely better than nothing.

Step 2: Cut out 2-4 strips of boob tape (decide on the length after you finish reading step 3 of this method) for each breast.

Step 3: Take the first strip of boob tape. Peel off the strip from one side and tape that side underneath your breast, right at its base in the middle.

 With one hand hold the breast and lift it up where you want it to stay. Slowly peel off the tape across the breast upwards, taping over the nipple and above. Repeat the same process with the other breast.

The end of the strip can be wherever you want, depending on how high your outfit allows. It can end right above the breast, or it can go beyond your shoulders.

 Keep in mind that the higher the strip ends, the more support it provides to your boobs. This is especially important for boobs that are on the bigger side.

Cut your vertical strips in step 2 according to how high you want to tape them.

You can use the vertical strips method even with strapless tops, if the strips end right above the breast.

Depending on your outfit, you can choose to tape the breast not straight above (across the nipple), but vertically on the side of the boob. This will allow you to wear really low cut dresses.

Step 4: Take the second strip and do essentially the same thing as in step 3, but next to the first strip. The second strip should go right next to the first one. You can choose to tape it diagonally, if that works better with your outfit. That way, the strips start next to each other, but end on the exact same spot above the nipple. Repeat the same process with the other breast.

Step 5: Take the third strip and tape it in the same way as in step 4. This time, tape the strip next to the first strip on the other side. It can end at the same spot as the first two strips. In that way, the tape forms a triangle shape covering and lifting your whole breast. Repeat the same process with the other breast.

 That should be it! You can cut the strips shorter or longer, depending on how high you want to tape them.

You can also add a fourth or fifth strip for additional support, or you can go with only 2 strips.

  (Optional) Step 6: Depending on how low cut the outfit is, you can choose to add a horizontal strip at the end. To do this, cut a 12 inch (30 cm) boob tape strip.

Take the strip of boob tape. Lean forward slightly. Peel off the strip from one side and tape that side at the base of your breast (near your armpit), while you’re leaning forward. Slowly peel off the tape across the breasts to the other armpit, squeezing the boobs together as you go.

Don’t go straight across the boobs. Instead, go in a U-shape underneath your breasts, in order to push them upwards.

In this way, this strip of boob tape will push the boobs both inwards and upwards, making them perkier.

However, keep in mind that this optional step can only work if the outfit is not too deep. If it is, the horizontal strip will be visible, defeating its purpose.

 

A variation of the Vertical Strip Style for Criss Cross Halter Tops

If you wanna rock a Criss Cross Halter Top, it’s easy to do so with a slight variation of the vertical strips method. The main thing to keep in mind is to use shorter strips of boob tape, so that they’re not visible above the top.

Step 1: Regardless of the method you’re using to tape your breasts, the first step is the same. It involves applying nipple covers or pasties on your nipples, which are the most sensitive part of your breasts.

While this step is not mandatory, it’s definitely highly recommended. Not only does it protect the sensitive nipples, but more importantly, it makes removing the boob tape a painless experience.

 Step 2: Cut out 1-2 short strips of boob tape for each breast, and one longer strip.

Step 3: Take the first strip of boob tape. Peel off the strip from one side and tape that side underneath your breast, right at its base in the middle.

With one hand hold the breast and lift it up where you want it to stay. Slowly peel off the tape across the breast upwards, taping over the nipple and above.

 Optional Step 4: Depending on your halter top, you can choose to add a horizontal strip at the end. To do this, cut a 12 inch (30 cm) boob tape strip.

Take the strip of boob tape. Lean forward slightly. Peel off the strip from one side and tape that side at the base of your breast, while you’re leaning forward. Slowly peel off the tape across the breasts to the other side, squeezing the boobs together as you go.

In this way, this strip of boob tape will push the boobs both inwards and upwards, making them perkier.

 

Horizontal Strips Style:

Can be used with: strapless dresses, backless dresses, halter tops, one shoulder dresses, tube tops

With the horizontal strips method, you apply 3 long strips of boob tape horizontally, from one side of the breasts to the other (from one armpit to the other one).

These strips will give your boobs lift and give you cleavage.

 Step 1: Regardless of the method you’re using to tape your breasts, the first step is the same. It involves applying nipple covers or pasties on your nipples, which are the most sensitive part of your breasts.

While this step is not mandatory, it’s definitely highly recommended. Not only does it protect the sensitive nipples, but more importantly, it makes removing the boob tape a painless experience.

Extra tip: If you don’t have nipple covers or pasties handy, even cotton pads will do fine – it’s definitely better than nothing.

Step 2: Cut out 2-4 strips of boob tape, each of them 12 inches (30 cm) long. Once you do this method a few times, you can cut the strips shorter or longer, if that’s what works for you. You can also choose the optimal number of boob tape strips.

Step 3: Take the first strip of boob tape. Lean forward slightly. Peel off the strip from one side and tape that side at the base of your breast (near your armpit), while you’re leaning forward. Slowly peel off the tape across the breasts to the other armpit, squeezing the boobs together as you go.

 Step 4: Take the second strip of boob tape and essentially do the same thing, but higher on the breasts. The second strip should go just above the first one. It should also go from one armpit to the other. This second strip will give your boobs additional lift.

Step 5: Take the third strip of boob tape. This strip should also be taped the same way, but even higher. The third strip should be at the nipple level.

That should be it! You can cut the strips shorter or longer, whatever works for you. You can also add a fourth or fifth strip for additional support, or you can go with only 2 strips.

Now your boobs have lift and support, and the boob tape isn’t visible in a strapless or a backless outfit. 

 

Features: