>>>>> One of the Most Professional Obd2 Diagnostic Scanner You Should Pick It up !!! 2023 Newest Version
OE-Level All System Diagnostics:Vident iSmart800Pro is a all system diagnostic scanner as it can scan all available systems of the car to ✔read/clear codes, ✔view live data stream of various sensors and graph it, record and playback the data, ✔ retrieves freeze-frame, ✔perform active tests to check the work status of modules, providing you with a Dealership-Level only diagnosis, getting the accurate and in-depth diagnosis across all automotive systems.
40+ Special Functions: Vident iSmart800Pro car diagnostic tablet has packed the all key special functions of an automotive diagnostic scanner. For example ABS Bleeding, Battery Matching, Brake Pad Replacement, Anti-theft Matching, DPF Regeneration, Odometer Calibration, Adblue Reset, Tire Pressure Reset, Service Lamp Reset, Headlamp Matching and more.Note: Special functions does NOT work on all vehicles. Pls contact us to check the compatibility before purchase.
Bi-Directional Control/Active Tests:Allows sending the command directly from diagnostic tablet to the vehicle ECUs to perform active tests, like window, door, sunroof and headlamp etc. Bidirectional Control OBD2 scanner is a standard choice in the workshop/auto repair shop, which can significantly reduce the mechanic's diagnostic time, It can also help DIYers make fault location easier.
110+ Brands Cars Coverage:iSmart800Pro is a comprehensive diagnostic tool, help you to troubleshoot the problems fast for 95% US, European, Asian vehicle brands.
Android 7.1.2 OS + 1GB RAM & 8+64GB ROM: The new version of the operating system and sufficient memory ensure smooth diagnosis and increase the speed of diagnosis.
7'' 1024*600 IPS LCD Touch Screen: Large screen size, clear picture quality and sensitive click feedback improve customer experience.
7200mAh Battery: Built-in 7200mAh rechargeable lithium-ion battery for up to 30 hours of continuous operation when it's fully charged. (30 hours is an estimated value)
When you connect the car through the diagnostic cable to use, the car is also able to reverse charge the device, so you don't have to worry even if the device runs out of power.
Support CAN FD+DoIP Protocols: Expanded range of supported models.
>>>>> 2023 Bi-Directional Scan Tool for Fast Issue Location (Active Tests)
The application of Bi-directional Control (Active Test) improves 2x faster efficiency to problems location and diagnostic accuracy.
Vident iSmart800Pro can output the commands to ECUs, read the ECU data and monitor the operation of the actuators. Through active tests, also called actuator tests, this bi-directional diagnostic scanner can precisely locate the car problems, letting you quickly know whether a specific system, component, or subsystem is functioning properly or not.
For example: If one of parts is not working and leads to the failure, it could be a faulty component, wiring or relay. By commanding component to do active tests, like switch on/off, via Vident iSmart800Pro scanner you can quickly determine whether it’s a wiring, relay, or component issue without removing any parts.
>>>>> 40+ Special Functions to Meet Most of Your Needs
ABS Bleeding:
1.When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.
2.If the ABS computer, ABS pump, brake master cylinder, brake cylinder, brake line, or brake fluid is replaced, the ABS bleeding function must be performed to bleed the ABS.
Battery Matching:
1.Use the car diagnostic device to reset the car battery monitoring unit to clear original fault information about insufficient battery electric quantity, and match the battery again and monitor battery based on current battery information.
2.Battery matching must be performed in the following cases:
a) Main battery is replaced. Battery matching must be performed to clear original electric quantity insufficiency information and prevent the related control module from detecting false information. If the related control module detects false information, it will invalidate some electric auxiliary functions, such as automatic start&stop function, sunroof without one-key trigger function, power window without automatic function.
b) Battery monitoring sensor. Battery matching is performed to re-match the control module and motoring sensor to detect battery electric quantity use information more accurately, which can avoid the instrument panel displaying false information.
Brake Pad Replacement:
1.If the brake pad wears the brake pad sense line, the brake pad sense line sends a signal sense line to the on-board computer to replace the brake pad. After replacing the brake pad, you must reset the brake pad. Otherwise, the car alarms.
2.Reset must be performed in the following cases:
a) The brake pad and brake pad wear sensor are replaced.
b) The brake pad indicator lamp is on.
c) The brake pad sensor circuit is short, which is recovered.
d) The servo motor is replaced.
Anti-theft Matching:
1.To prevent the car being used by unauthorized keys, the anti-theft key matching function must be performed so that the immobilizer control system on the car identifies and authorizes remote control keys to normally use the car.
2.When the ignition switch key, ignition switch, combined instrument panel, ECU, BCM, or remote control battery is replaced, anti-theft key matching must be performed.
DPF Regeneration:
1.DPF regeneration is used to regularly clear PM (particulate matter) from the trap in combustion oxidation mode (such as high temperature heating combustion, fuel additive or catalyst reduce PM fire point combustion) to stabilize trap performance.
2.DPF regeneration matching must be performed in the following cases:
a) The bleeding backpressure sensor is replaced.
b) The PM trap is removed or replaced.
c) The fuel additive injector is removed or replaced.
d) The catalytic oxygenizer is removed or replaced.
e) The DPF regeneration MIL is on and maintenance is performed.
f) The DPF regeneration control module is replaced.
Odometer Calibration:
1.Instrument panel mileage calibration is used to copy, write, or rewrite mileages. That is, use the car diagnostic computer and data line to copy, write, or rewrite chip data on the instrument panel to make the instrument panel display actual mileages.
2.Usually, when the vehicle speed sensor is damaged or the mileage is incorrect due to instrument panel faults, you must perform mileage calibration after maintenance.
Adblue Reset:
After the diesel exhaust gas treatment fluid (automobile urea) is replaced or filled up, the urea reset operation is required.
Tire Pressure Reset:
1.After the tire pressure MIL turns on and maintenance is performed, the tire pressure resetting function must be performed to reset tire pressure and turn off the tire pressure MIL.
2.Tire pressure resetting must be performed after maintenance is performed in the following cases: tire pressure is too low, tire leaks, tire pressure monitoring device is replaced or installed, tire is replaced, tire pressure sensor is damaged, tire is replaced for the car with tire pressure monitoring function
Service Lamp Reset:
1.If the service lamp is on, you must provide service for the car. After service, you need to reset the driving mileage or driving time so that the service lamp turns off and the system enables the new service cycle.
2.After changing engine oil or electric appliances that monitor oil life, you need to reset the service lamp.
Headlamp Matching:
This function is used to initialize the adaptive headlight system. The adaptive headlight system determines whether to automatically turn on the headlight according to ambient light intensity, monitors driving speed and body posture, and adjusts the headlight lighting angle.
All of the 40+ Special Functions: ABSBLEED/ BRT / EPB / GEARLEARN / IMMOBILIZER / INJECTOR / Oil / SAS / TPMS / TPS / DPF / SUSPENSION / SUNROOF / GEARBOX / AJUSTE FUEL / AFS / ODOMETER / CLUTCH / Language / SEATMATCH / Turbo / WinDoor / PFP / EGR / TCMOIL / ATADAPTION / AIRBAG / CHANGETIRE / EVAPTEST / ADBLUE / COOLANT / ENGPBM / HVOLBAT / MOTANG / NOXSENSOR / STOPSTART / TRANSPORT / ICCS / GPF / ACINI
>>>>> OE-Level All System Diagnoses with All-Around & In-depth Diagnoses
Vident iSmart800Pro full-system diagnostic tool works well on 110+ car makes and models worldwide (1996 and newer) to read/ clear codes, read ECU info., view Live Data, do active tests, and perform special functions for certain systems.
① Read ECU Information of the control units including unit type, version numbers, etc.
② Read / Clear DTCs to locate problems and clear the codes after certain repairs.
③ View Live Data of each parameter item in various modes, such as text, waveform, or combination (4 in 1 data stream).
④ Active Test/Bi-directional Control to accurately figure out whether a specific system, component, or subsystem in certain parts goes well or not.
⑤ Special Functions to do various daily automotive maintenance functions on certain systems.
>>>>> Widely Compatible With 110+ Brand Worldwide Vehicles
For example, Fit For Audi, Fit For BYD, Fit For Benz, Fit For BMW, Fit For Ford, Fit For GM, Fit For VW, Fit For Honda, Fit For Holden, Fit For Citroen etc.
>>>>> 17 Kinds Language To Avoid Language Barriers And Use It Around The World Without Restriction
Support English, Spanish, German, French, Portuguese, Dutch, Swedish, Italian, Simplified Chinese, Traditional Chinese, Russian, Japanese, Korean, Hungarian, Thai, Slovakia, Polish.
>>>>> No Low Battery Worries
iSmart800Pro built-in 7200mAh rechargeable lithium-ion battery for up to 30 hours of continuous operation and support connect the vehicle via diagnostic cable to charge when work.
>>>>> 2-Year Warranty & 3-Year Free Updates & Professional Tech Support
>>>>> Auto Vin & Auto Scan
Automatically retrieve the vehicle identification number for comprehensive all available systems scan for quick diagnostics.
>>>>> Full OBD2 Functions Supported
1. Read Codes: confirm which section of the emission control system has malfunctioned.
2. Erase Codes: erases the codes from the vehicle after certain repairs.
3. Live Data: Support to see all real-time data streams, displays the dynamic data of the data stream items in text and graphical way, Simpler and easier to understand. Besides, it supports viewing multiple data dynamics in one graph.
4. View Freeze Frame: records the certain vehicle conditions when an emission-related fault occurs.
5. I/M Readiness: determine if your vehicle is ready for a smog test, Quick State Emissions readiness check, and drive cycle verification.
6. O2 Monitor Test: monitors and tests operation of the O-2 s-ensors to identify problems that can affect fuel efficiency and vehicle emissions.
7. On-Board Monitor Test: retrieves test results for emission-related powertrain components and systems that are not continuously monitored.
8. Component Test: allows to control operation of vehicle components, tests or systems.
9. Vehicle Information: Retrieve vehicle’s Vehicle recognition number, c-alibration ID, and c-alibration verification number.
10. Modules Present: identifies module IDs and communication protocols for OBD2 modules in the vehicle.
>>>>> Live Data - For Clear and Complete Health Status Check
Ability to record all available live data parameters and graph any four on screen at once.
