HW_VER CPF905 CF5 POE version
MTK chipset: MT6735WM
Wi-Fi chipset: MT6625L
RAM / ROM: 4GByte EMMC + 512MByte DDR2
WLAN: IEEE 802.11b / g / n
Wi-Fi transfer rate: UP to 150 Mbit / s
Encryption: Wi-Fi Protected Access (WPA / WPA2) 2
Soft SIM: esim or softsim
Adaptation: Intelligent system, high level (adaptability) - LED: LED display


Harbor

SIM: 2FF SIM (SIM card is NOT included)
USB: USB TYPE A (5V 1A IN)
DC power: 12V 1A IN / 48V POE adapter
RJ45: 1 * WAN / LAN


Internet

Wi-Fi: Wi-Fi AP Max. 10 users
SSID 4G-CPE-XXXX last 4 digits of the IMEI
Standard WiFi password: 1234567890


Operating environment

Working temperature: -20 to 75 C
Working height: Currently tested maximum height 3000 m (10,000 inches) operating system
PC users: A PC with Windows XP (SP3), Windows Vista (SP1), Windows 7 or Windows 8
MAC users: A Mac with OS X v10.5.7, OS X Lion v10.7.3 or higher


If you don't have a signal indoors, you can install the router outdoors and then install a wireless repeater indoors. The WiFi repeater can improve the WiFi signal; Even if you set up the 4g router outdoors, you can also use the WLAN via the WLAN repeater indoors.
Features:

[outdoor 4G LTE CPE router ] CPF905-CF5 It is an outdoor 4G LTE CPE router designed for WIFI users to access the internet via UMTS / HSPA / LTE. It is used to provide internet access for indoor and outdoor WiFi coverage and to monitor the camera project.

[IP65 waterproof] CPF905-CF5 LTE CAT4 up to 150Mbps IP65 waterproof and the wireless transmission speed is 300Mbps. It is suitable for home / office / factory / warehouse / garden / parking lot installation. It can convert 4G to WiFi hotspot, for indoor or outdoor use with no broadband space, so you can enjoy smooth internet while working from home / working online / teleworking.

[Stable network] Comes with 48V POE adapter PowerSupply works with IP camera and POE switch. including 1 * WAN / LAN port and a SIM card slot, Ethernet mode: dynamic / PPPOE / LAN.Dual high gain external antenna two is a 4G antenna and two is a WiFi antenna (support to remove and change other antenna ) Can be connected to 10 devices at the same time.

[APPLICATION] Please insert the SIM card and then turn on the router. Even if your SIM card is compatible with the product, it is not necessarily plug and play. You may need to disable the SIM card PIN code and change the APN, enter the router's IP address: 192.168.199.1 and click Network - APN - Activate. Change APN.

[Note] You can find the APN of the SIM card on the official website of the mobile operator or on the mobile phone. Make sure that the SIM card is activated, roaming services and virtual SIM card and IoT SIM card are not supported.