Body Material | : | Plastic |
Cartridge Material | : | PRGF – PP |
Maximum Working Pressure | : | 8 bar |
Maximum Working Temperature | : | 60° |
The Filtration Sensitivity | : | 130 micron |
Cartridge | : | Disc |
General Characteristic
Body Material : PP
Cartridge Material: Disc Cartridge(PP)
Maximum Working Pressure : 8 Bar (116 PSI)
Maximum Working Temperature: 60 °C/ 140 °F
Filtration Degree: 130 micron
CODE | D | M | T | D1 | H | K | FLOW | FILTRATION AREA | WEIGHT |
inch | mm | m³/h | cm² | kg | |||||
MPD3/4 | 3/4 | 1/2 | 68 | 190 | 160 | 5 | 185 | 0,45 | |
MPD10 | 1 | 1/2 | 68 | 190 | 160 | 6 | 185 | 0,45 | |
MPD10S | 1 | 1/2 | 96 | 230 | 220 | 10 | 325 | 0,75 | |
MPD15 | 1½ | 1/2 | 96 | 230 | 220 | 15 | 325 | 1 | |
MPD15S | 1½ | 1/4 | 1/2 | 120 | 280 | 270 | 20 | 550 | 1,5 |
MPD20 | 2 | 1/4 | 1/2 | 120 | 280 | 270 | 25 | 550 | 1,5 |
Filter Cleaning
The pressure difference between the inlet and outlet is observed manually from the manometers. If the pressure difference increases, the water flow is cut off and the system is stopped. Then remove the cover and take out the cartridge. For screen filter, the screen can be directly cleaned with pressurized water and reassemblied. For disc filter, loosen the the disc cartridge screw and clean the disc with pressurized water, then the filter can be reassemblied.