![]() |
![]() ![]() |
![]() ![]() |
![]() ![]() |
![]() ![]() |
![]() ![]() |
![]() ![]() |
![]() ![]() |
![]() ![]() |
![]() ![]() |
Package Includes:
1 x 32mm Pin Wrench MT0006
4 x 4mm Removable Pins
4 x 4.5mm Removable Pins
1 x 35 mm Pin Wrench MT0009
3 x 6mm Replaceable Pins
26 x Tilt/Trim Cap Seals 115225FS
Compatible Models:
60X-43800-00-4D, 63P-43800-00-4D, 63P-43800-01-4D, 63P-43800-02-4D,
63P-43800-02-8D, 63P-43800-03-00, 63P-43800-03-00, 63P-43800-06-00,
63P-43800-07-00, 64E-43800-05-00, 64E-4384J-00-00, 67H-43800-00-4D,
68F-43800-00-4D, 68F-43800-01-4D, 68V-43800-03-4D, 68V-43800-04-00 & More.
Fits for 1997 to current Yamaha boat power trim tilt units 115HP, 150HP, 175HP, 200HP, 225HP (20" Shaft), 250HP (20" Shaft) & More.
Also fits for Suzuki Honda Tohatsu Nissan all Showa Style 3 ram integrated trim tilt system.
Warm Tips: Doesn’t fit for Yamaha 200-300hp 4 strokes.
Usage:
In freshwater application on a bass boat you will see the bolts have stretched and lost their torque from the hydraulic pressure in between the valve body and manifold.
In salt water application, salt and corrosion build between the flange and wedges it apart as well as oxidizing the O-ring grooves and forcing them to fail and fall out of place.
Two wrench set fits for all Yamaha Suzuki Johnson Evinrude trim and tilt end caps.
Ultra high Strength stainless steel brings minimum 200 ft-lb proof strength.
Replaceable Pins are available.
Rebuild the trim seal on the trim and tilt unit. Used to remove and install the trim caps without damage.
Used with 1/2" square drive or breaker bar for proper installation.
ALL pins can be engaged caps and prevent breakage.
MT0006
Feature
Fitment
MT0009
Feature
Fitment
Item Specifics | |
---|---|
EAN | Non applicable |
Type | Outboard Trim / Tilt Pin Wrench & Seal Kit |
Marque | UAP-Auto |
Numéro de pièce fabricant | 115225FS & MT0006 & MT0009 |
Garantie | 1 an |
1. Payment methods accepted: Paypal only.Our Paypal account allows you to pay by credit card, debit card and your Paypal balance.
2. All major credit cards are accepted through our secure payment processor Paypal.
3. Payment must be received immediately.
4. We ship items to Your Paypal address.Please make sure your Paypal address is correct before you pay,cause it cannot be changed once the order shipped out.
1. Item will be shipped within 1 business day after your payment cleared.
2. Item will be shipped by SpeedPak or other shipping method .
3. Delivery time depends on destination and other factors,please feel free to contact us by email if you cannot get your order in time.
Please read the shipment and payment detail carefully before you place the order.
1. Return to us within 60 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).
2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake.
3. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
Please contact us via ebay using"Contact member". We will respond within 1 business day or less.Thank you for your understanding.
Our office hours is as below :
Usa-auto-plus
Your best choice
Shop Category Hot Sale! Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
115225FS Seal Kit + Trim/Tilt Pin Wrench MT0006 MT0009 for Yamaha,Johnson,Evinrude,Suzuki,Honda
Package Includes:
1 x 32mm Pin Wrench MT0006 4 x 4mm Removable Pins 4 x 4.5mm Removable Pins 1 x 35 mm Pin Wrench MT0009 3 x 6mm Replaceable Pins 26 x Tilt/Trim Cap Seals 115225FS
Compatible Models:
60X-43800-00-4D, 63P-43800-00-4D, 63P-43800-01-4D, 63P-43800-02-4D, 63P-43800-02-8D, 63P-43800-03-00, 63P-43800-03-00, 63P-43800-06-00, 63P-43800-07-00, 64E-43800-05-00, 64E-4384J-00-00, 67H-43800-00-4D, 68F-43800-00-4D, 68F-43800-01-4D, 68V-43800-03-4D, 68V-43800-04-00 & More.
Fits for 1997 to current Yamaha boat power trim tilt units 115HP, 150HP, 175HP, 200HP, 225HP (20" Shaft), 250HP (20" Shaft) & More. Also fits for Suzuki Honda Tohatsu Nissan all Showa Style 3 ram integrated trim tilt system.
Warm Tips: Doesn’t fit for Yamaha 200-300hp 4 strokes.
Usage:
In freshwater application on a bass boat you will see the bolts have stretched and lost their torque from the hydraulic pressure in between the valve body and manifold.
In salt water application, salt and corrosion build between the flange and wedges it apart as well as oxidizing the O-ring grooves and forcing them to fail and fall out of place.
Two wrench set fits for all Yamaha Suzuki Johnson Evinrude trim and tilt end caps. Ultra high Strength stainless steel brings minimum 200 ft-lb proof strength. Replaceable Pins are available. Rebuild the trim seal on the trim and tilt unit. Used to remove and install the trim caps without damage. Used with 1/2" square drive or breaker bar for proper installation. ALL pins can be engaged caps and prevent breakage.
MT0006
Feature
Fitment
MT0009
Feature
Fitment
Payment
1. Payment methods accepted: Paypal only.Our Paypal account allows you to pay by credit card, debit card and your Paypal balance.
Shipping
1. Item will be shipped within 1 business day after your payment cleared.
Please read the shipment and payment detail carefully before you place the order. Returns
1. Return to us within 60 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice). Contact Us
Please contact us via ebay using"Contact member". We will respond within 1 business day or less.Thank you for your understanding. - 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
- 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday And our office is closed on Sunday and public holidays (Hong Kong) We apologize for the late reply during the holidays.Please contact us via ebay using"Contact member". We will respond within 1 business day or less. Please include your ebay item numberor order number in all communications. All rights reserved. |