|
Phase locked loop solid state Tesla coil drive board powerful drive board, half bridge full bridge can be driven, drive the maximum can provide to the hundred watt level! Using CD74HC4046 phase-locked loop chip solution, compared to the old CD4046 used higher frequency waveform better frequency! Use the magnetic loop feedback secondary frequency. The driver board with the drive our 50N50 half-bridge module. Power can reach about 500W. Secondary frequency range in 750KHZ-1MHZ are available.
Official recommended coil parameters:
The secondary coil is made of 0.14mm enameled wire with a skeleton diameter of 60mm and is wound 650 times.
Primary coil using 0.1 * 130 strands of yarn wrapped wire skeleton diameter 80mm winding 7 turns.
Friendly reminder:
About the secondary coil and primary coil material is recommended to choose tetrafluoro or quartz such material!
Because the CW continuous operation of the drive, the secondary will be very high heat.
The use of traditional plastic skeleton will lead to a few minutes of operation will be scrapped!
After 24H aging test this driver board work very stable!
Driver board power supply using DC 12V, with reverse connection protection!
According to the different driving loads require different currents, it is recommended that the bottom 3A!
With Bluetooth music function! Support any format audio playback, no need for square wave audio!
Special tips:
Phase locked loop Tesla coil frequency tracking range is limited, you need to manually adjust the frequency!
No oscilloscope is recommended to do the same coil directly according to the parameters we provide!
There is an oscilloscope directly test the drive output frequency on the drive board!
Adjust to and your secondary resonant frequency can be consistent!
If there is no arc, please try to switch the feedback phase!
package ：
1pcx
Phase Locked Loop Solid State Tesla Coil PLLSSTC Bluetooth Gate Driver Board
-
If you have any questions, please contact us in time, we will help you deal with the problem for the first time.
|