Current will be reduced by 50% when using 110V voltage
ZTE 3000v4.3 Quad Power Supply
Running at as low as 20 watts.
The machine uses full-wave rectification, the highest efficiency four-wire mode, with a thin wire connected in parallel to the farthest end of the positive and negative output lines can be.
Charging mode has a battery anti-reverse connection function, the output relay is disconnected state, not connected to the battery in the case of open output will automatically shut down the output and
Disconnect the output relay.
Power mode can not reverse the battery connection, the output relay is a long-term state, the output is not connected to the load can also maintain a regulated power supply output.
Battery repair power supply, battery universal charger.
Four generations of kits to change the CNC adjustable power supply, the most widely used kits, high-power repair power, charging power, full self-stop, battery capacity display.
battery capacity display.
Function details
Voltage 0-120V, current 0-25a, and voltage, ammeter minimum resolution of 0.01
Direct control of the switch on and off through the encoder, power consumption after shutdown only 1.5W
Support full automatic