Retrosound Silver "Motor 6DAB" | vintage radio |

RETROSOUND "MOTOR-6DAB" DAB+ complete set "Silver" with lots of accessories

The "Model MOTOR-6DAB" is the absolute top model from RetroSound. It is visually identical to the cheaper models and, in addition to their features, has certified Apple iPhone control via a USB cable or wirelessly via Bluetooth. There are also two USB inputs on the back of the device and a third preamp output for an external subwoofer.

FURNISHING
- DAB+ digital radio
- FM radio with RDS functions
- A2DP Bluetooth audio playback for wireless smartphone integration
- Two USB inputs on the back of the device
- Certified Apple iPhone control via USB cable
- An AUX input (3.5mm) on the back of the device
- Bluetooth hands-free kit with external microphone
- Three preamp outputs for external power amplifiers (Front/Rear/Sub)

SCOPE OF DELIVERY
- MOTOR-6DAB RETROSOUND DAB+ radio module
- RETRO-RADIO-C RETROSOUND display unit (chrome)
- RSP-302 RETROSOUND front panel plastic (silver)
- RSP-006 RETROSOUND control knob metal (chrome)
- RSP-076 RETROSOUND control ring metal (chrome)
- RSP-294 RETROSOUND ISO installation kit for DIN slot
- USB4G Mini USB stick 4GB (black)
- USB/AUX built-in socket with 60cm cable (black)
- H-MARK Confirmation from TÜV Süd

OPTIONAL ACCESSORIES
DAB1 - AMPIRE DAB+ antenna splitter
Passive rod or telescopic antennas were installed in most classic vehicles. These are also suitable for DAB+ radio reception. In this case, order the DAB1 antenna splitter at the same time. With window antennas or electronically amplified roof antennas, you must install a separate DAB+ antenna.
RS-TOOL - AMPIRE 1/2" tool for RetroSound control knobs
The union nuts of the two control knobs have a wrench size of 1/2 inch. The right tool is not common in Europe. So that you do not cause any damage when installing with the wrong tool, you should order the RS-TOOL at the same time.

H MARK
Any concerns that your H license plate might be in danger by installing a RetroSound car radio are unfounded. In the download you will find a confirmation with the approval of the entire AKE working group (TÜV SÜD, TÜV Rheinland, TÜV Nord, Dekra, KÜS, GTÜ) stating that the RetroSound Model Zuma" and the RetroSound Model Two" including vehicle-specific panel and control buttons may be installed in classic cars with an H license plate or do not prevent the allocation of the H license plate!

FURNISHING
- Playback of MP3 and WMA files via the rear USB input
- Apple iPhone control (touchscreen operation of the Apple iPhone is still active in parallel)
- Bluetooth hands-free kit with A2DP audio streaming
- Adjustable LCD backlight with 32,000 different colors
- DAB+/FM/AM radio receiver with RDS and 30 preset stations
- Tuner with European odd and even radio frequencies
- Integrated 4-channel amplifier (4 x 24 watts RMS / 45 watts max.)
- 3 stereo cinch outputs for external amplifiers (front/rear/subwoofer)
- 3 equalizer programs plus individual bass/treble/fader/balance adjustment
- XBAS loudness function
- Non-volatile memory

EXPANSION POSSIBILITIES
- 2 USB inputs (back of device) up to max. 32GB
- 1 AUX input (stereo)
- 3 cinch outputs (stereo) for external amplifiers (front/rear/subwoofer)
- Separate switch-on line for motor antenna and amplifier

TECHNICAL DATA RADIO PART
- VHF European radio frequency range 87.5-107.9 MHz. (0.05MHz. in steps)
- AM frequency range 530-1710kHz (9kHz. in steps)
- DAB+ reception via SMB antenna input for passive DAB+ antennas

IPHONE COMPATIBILITY
You can of course operate an Apple iPhone wirelessly via Bluetooth with this car radio. If you want to control it wired, you also need a corresponding USB adapter cable.

GENERAL DATA
- Dimensions radio base unit 101x51x136mm
- Voltage supply 10.5 to 14.4 volts
- Maximum current consumption 15 amps
- Quiescent current 3.5mA
- Output power 12V, 4 ohms, <1% distortion: 4x15 watts sinus
- Speaker impedance 4-8 ohms
- Cinch outputs 6 channels 2.85 volts for external amplifiers (front/rear/subwoofer)
- AUX1 input sensitivity >300 mV / 6 kOhm

LEGAL NOTICE
iPhone are trademarks of APPLE Computers, registered in the US and other countries. For best results, Apple has established specific compatibility requirements for accessory manufacturers. Products designed and certified to be compliant will display the "Made for" mark on the packaging. To ensure compatibility when purchasing third-party accessories for use with your device, look for accessories that have the label "Made for" for your device (see below).
"Made for iPhone" means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards.

E-APPROVAL
- E-approval e13 03 10006 e13*72/245*2006/96*10006*00