Red Laser Collimator for Newtonian Marca Telescope Alignment 1.25 Inch...
- SVBONY user adjustable laser collimator;allows anyone easily collimate 1.25'' and 2'' reflector telescopes;come with removable 2" adapter;built with metal material;make alignment no longer boring and time consuming
- Easy to use;accurate collimation in a few minutes provide a more clearer image;no longer have to go back forth;just watch the collimator from the mirror end of the scope and adjust the screws
- 7 brightness levels red laser beam;adjustable brightness;suit for different light conditions;amazing alignment in dark and day;so can get the better views possible from your reflector telescope
- High quality solid metal body;for a long term use;CR2032 battery included and comes with a full set of instructions with a step by step procedure on how to properly align a relfecting telescope
- Triple cemented of Lens;Improve the stability of red dot;Red laser with 7 brightness levels;Quick alignment;much faster than a manual collimator ; It's a great Halloween birthday christmas gift
Product Description
SVBONY Laser Collimator 1.25'' Metal with 2" Adapter
It's great for a student, you will need it when you are learning astronomy class or when attending an astronomical society in college or school
No telescope can align its optical axis for a long time, even if it is already factory calibrated.
The Newtonian reflection telescope is very sensitive to the optical axis; a slight movement of the calibration screw can deflect the entire optical axis
Its precision is so high that it goes out in the car, the optical axis will have a small deviation, and sometimes it will completely collapse.
Even if the lens barrel is pointed differently, the optical axis will be different. (An interesting experiment is to point the same star through the equatorial mount, then move the equatorial mount's right ascension axis from left to right through the field of view to observe the optical axis.Offset).
This is why you should choose a star to calibrate, not the target of interest (Jupiter or Moon). If you observe deep space, you feel that the slight deviation can be tolerated, and then you will not be calibrated when you turn to planet observation. This is actually very risky.
The good way is to check the optical axis before each observation, just like checking the mailbox and the tire before driving far away.
SVBONY Laser Collimator for Newtonian Telescopes
7 Level Ajustable Brightness BeamAim at the target anytime,anywhere,even during the daytime can also be used normally. 7 settings of brightness is useful and easier on the eyes and great for different areas of light | Removable 2" adapterThis is a newest 1.25" laser collimator includes removable 2" adapter;the triple cemented lens to improve the stability of dot;it's designed for accurate collimation of all Newtonian and SCT reflector telescopes | Easy to targetIt is very easy to simply look at the laser target and adjust the telescope until the red dot is centered. no need to keep looking at the cap in the telescope's eyepiece |
Durable design
SVBONY Red Laser Collimator is made of all-metal material and has a long service life.
- Package List:
- 1×SVBONY Laser Collimator for Mirror Reflector Telescopes
- 1×2-inch Adapter Sleeve
- 1×English User manual
Warning:
Do not look directly into the laser beam! Permanent eye damage may result!
Avoid prolonged skin exposure to laser rashes or burns may occur!
SVBONY Red Lasor Collimator Using Methods:
The process of calibration is repeated (check-adjust-check-adjust....). In addition to the following points, there is no difficulty or risk in the whole process:
- The big screw in the middle that fixes the secondary mirror, never touch it.
-The three fine-tuning screws should be very gentle when screwing in and out, not too loose or too tight
- If you screw one of the screws out, the other two will be screwed in.
- When rotating, be sure to move small: a very irregular mirror can be rotated half a turn at a time, but the final adjustment is still very small.
- Every time the rotation, the star will move because of this adjustment, it must be pulled to the center again.
For Newtonian reflection telescope, calibration usually takes two steps: first adjust the secondary mirror to the appropriate position (using the calibration eyepiece), then adjust the primary mirror
Specification:
| Name: | Laser Collimator |
| Fit Type: | Newtonian and SCT reflector telescopes |
| Body Material: | Metal |
| Net Weight: | 135g/4.79oz |
| Note: | The Best working distance is two meters |
| Lens Coating | Fully Multi Coated | Fully Multi Coated | Fully Multi Coated | Fully Multi Coated | Fully Multi Coated | Fully Multi Coated |
|---|---|---|---|---|---|---|
| Barrel size | 1.25" | 1.25" | 1.25" | 1.25" | 1.25" | 1.25" |
| advantage | F4 aperture optics | Dual Helical Focuser | 4-Elements APO Apochromatic | 6.3mm 32mm 40mm eyepiece and 2x Barlow Lens | 5x barlow lens | M28.5x 0.6 standard thread |
| material | Aluminum Profile | Aluminium | Stainless steel | Aluminum | Metal |
Item Specification
-
Item model number FUSF9123A Power Source Battery Powered Focus Type Auto Focus Country of Origin China Compatible Devices Reflector Telescope Item Weight 8.1 ounces Batteries 2032 Lithium Ion batteries required. Number of Batteries 2032 Lithium Ion batteries required. Is Discontinued By Manufacturer No Product Dimensions 8.46"D x 3.54"W x 2.36"H Finderscope Reflex
- Product Dimensions: 3.54 "h x 8.46 "h x 2.36 "h. Weight: 8.1 oz
- Fast shipping is very important for us.
Our standard shipping service is FREE.
Your order will be shipped within 1-3 business days upon full payment received.
Most items are delivered within 3-5 business days, however, please allow 3-10 business days.
We are shipping only to USA.
We only ship to the confirmed Paypal address. We reserve the right to cancel any order for any reason at any time.
We are not responsible for undeliverable addresses.
- We offer a 30 day return policy from checkout winning date.
Your satisfaction is guaranteed! If for any reason you are unhappy with your item, just return it within 30 days for a full refund, minus shipping cost. Please contact us prior to initiating a return so that we can issue you a refund authorization.
Items defective upon receipt must be packaged in their retail packaging as if new and returned with a detailed description of the problem.
Return shipping fees are not refundable.
We reserve the right to decline any returns if the above guidelines are not followed.
- All of our items, unless otherwise stated, will only run on 120 volts. Please check to make sure your country complies with these specifications.
If you have a problem or question regarding your transaction please contact us before leaving any type of feedback. We will work with you to resolve any problem you may have.