DC 12V 1 Channel 433MHz Wireless Relay Switch RF Remote Control Receiver Module Electric Gate LED Light Garage Door
Specification:
Working voltage: DC 12V
Working frequency: 433MHz
Working mode: Jog type / delay
Code matching method: intelligent learning
Working environment: -30~70 C
Receiving sensitivity: ≥-105dBm
Output type: one channel relay signal output
Output current: reactive ≤35A, resistive ≤6A
Product size: 40*37*25mm/1.57*1.46*0.98"

Learning method:
1. Jog:
Press the code matching button on the control panel once, and the LED indicator flashes once. After the LED indicator is lit, press the remote control button that needs to be matched. The LED indicator on the control panel flashes three times in succession.
2. Delay 5S/10S/15S:
For delay 5S, press 5 times and the indicator flashes 5 times; wait for the LED indicator light on, press the button of the remote control that needs to be coded; if the LED indicator on the control board flashes 3 times in succession, it means successful code matching.  (for delay 10S, press 5 times and the indicator flashes 5 times; for delay 15S, press 6 times and the indicator flashes 6 times)
3. Clear code:
Clear the code after the controller is powered on. After pressing the learning button on the control panel continuously for 8 times, all the learned remote controllers will be automatically cleared. After it is cleared, the remote controller that has learned the code before will no longer be controlled.

Note:
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.
1 X Wireless Relay Switch Receiver Module