3X(Smoke Generator Smoker Parts for 1/16 RC Tank Model 6.0S/6.1S Versio
3X(Color: random color, Do not accept designation
Material: composite material
Note:
Smoke generator heat wire is 6V, blower voltage is 6V
(It may be burnt if voltage is exceed 6V,it must use the voltage reduce plate if exceed 6V)
It fit for 6.0S and 6.1S(160A, with 160A letters on the shell) main boards.
For 5.3,6.0 ,and 6.1S(without 160A letters on the shell) main board,it must be used with the voltage reduce plate, connect the heat wire to the voltage reduce plate(default output is 6V).Connect heating wire and blower motor in parallel to the voltage reduce plate OUT +-. Connect the IN+- with mainboard port for smoke generator
Current for air blower is about 0.3A, heat wire requires about 1.2A
Package Contents:
1 x Smoke Generator)
Material: composite material
Note:
Smoke generator heat wire is 6V, blower voltage is 6V
(It may be burnt if voltage is exceed 6V,it must use the voltage reduce plate if exceed 6V)
It fit for 6.0S and 6.1S(160A, with 160A letters on the shell) main boards.
For 5.3,6.0 ,and 6.1S(without 160A letters on the shell) main board,it must be used with the voltage reduce plate, connect the heat wire to the voltage reduce plate(default output is 6V).Connect heating wire and blower motor in parallel to the voltage reduce plate OUT +-. Connect the IN+- with mainboard port for smoke generator
Current for air blower is about 0.3A, heat wire requires about 1.2A
Package Contents:
1 x Smoke Generator)
