Micro SG90 MG90S MG995 Servo Motor Für RC Hubschrauber Flugzeug Control
The main difference between these servo engines lies in the differences in gear material, torque, and rotation angle.
The SG90 is widely used for basic purposes. Except for different rotation angles, the SG90 90 90 degree, 180 degree, and 360 degree plates are all the same. The MG90S is equivalent to the metal tooth plate reinforcement of the SG90, and the installation dimensions are slightly different from those of the SG90. The external dimensions, torque, and other parameters of the steering gear at 90 degrees and 180 degrees are consistent, but the ultimate rotation angle is different. A 360 degree steering gear rotates continuously.
The fixed wing S-version servo (with a line length of 25CM) is not a helicopter version. Compared to the helicopter version, it has lower tension, performance, and motor life, making it suitable for electric fixed KT boards or bubble engines (recommended) with high cost-effectiveness.
Product model: SG90
Product weight: 9G
Working torque: 1.6KG/CM
Reaction speed: 0.12-0.13 seconds/60 °
Operating temperature: -30 °~+60 ° C
Deadband setting: 5 microseconds
Plug type: JR, FUTABA universal
Rotation angle: 180 degrees (left 90, right 90)
Type of servo: digital servo
Operating voltage: 3-7.2V
Structural material: plastic teeth
Line length: approximately 25CM
Attachment includes: black Q-mark, multifunctional rudder foot, rocker arm, fixed screw light, etc
Scope of application: Fixed wing, helicopter KT, glider, small robot, robotic arm and other models
Product model: MG90S/MG90
Product weight: 13.6G
Working torque: 2.0KG (1.8V)
Reaction speed: 0.11s (4.8V)
Operating temperature: 0 ° C~+55 ℃
Deadband setting: 5 microseconds
Plug type: JR, FUTABA universal
Rotation angle: 180 degrees (left 90, right 90)
Steering gear type: analog steering gear
Operating voltage: 4.8V
Structural material: hollow cup motor
Line length: approximately 25cM
Accessories include: multifunctional rudder feet, rocker arms, fixed screw lights, etc
Scope of application: Fixed wing, helicopter KT, glider, small robot, robotic arm and other models
MG90 is a metal digital steering gear, and MG90S is an analog steering gear. The digital steering gear is different from the analog steering gear in terms of circuit and smoothness. It is suitable for 450 helicopter swashplate steering gear, small robots, manipulators, ship models, car models, etc., mechanical steering, 90 degree limit angle, all metal gear, wear-resistant, awesome throwing machine is not afraid of explosion, car models are not afraid of collision, and awesome giving steering gear.
Product model: SG5010
Product weight: 39G
Locked rotor torque: 5KG/CM (4.8V) 11KG/CM (6.0V)
No load speed: 0.14S/60 ° (4.8V) 0.11S/60 ° (6.0V)
Operating temperature: -30 ° C~+60 ° C
Deadband setting: 4MS
Operating voltage: 3.5V-8.4V
Line length: 300MM
Key structural points: three-stage motor, all nylon gear structure, ball bearing
Product model: MG995/MG996R
Product weight: 55G
Working torque: 13KG/CM
Reaction speed: 53-62R/M
Operating temperature: -30 ℃~+55 ℃
Deadband setting: 4 microseconds
Plug type: JR, FUTABA universal
Rotation angle: 180 degrees (left 90, right 90)
Type of servo: digital servo
Operating voltage: 3-7.2V
Working current: 100mA
Structural material: partial copper teeth, hollow cup motor
Line length: approximately 25CM
Scope of application: Biped robots, robotic arms, remote-controlled ships, suitable for models such as 50 level, 90 level methanol fixed wing aircraft, and 26-50CC gasoline fixed wing aircraft
360 degree servo: It is actually equivalent to a continuously variable speed reduction motor, which can control speed and direction. There is no function for 0-360 degree angle control. The control method is the same as the control signal of a general servo.