• Fit Vehicles:
  •  
  • ✅2pcs for 2009-2011 Nissan Murano 3.5L Downstream 02 O2 Oxygen Sensor

    Fit Vehicles:

     

    1996-1997 Ford Probe 2.0L
    2008-2012 Infiniti EX35 3.5L
    2013 Infiniti EX37 3.7L
    2007-2012 Infiniti FX35 3.5L
    2013 Infiniti FX37 3.7L
    2009-2013 Infiniti FX50 5.0L
    2011-2012 Infiniti G25 2.5L
    2007 Infiniti G35 3.5L
    2008-2013 Infiniti G37 3.7L
    2007-2010 Infiniti M35 3.5L
    2013 Infiniti M35h 3.5L
    2011 Infiniti M37 3.7L
    2011-2013 Infiniti M56 5.6L
    2014-2015 Infiniti Q70 5.6L
    2015 Infiniti Q70L 5.6L
    2014 Infiniti QX50 3.7L
    2014 Infiniti QX70 3.7L
    2014 Infiniti QX70 5.0L
    2007-2009 Nissan 350Z 3.5L
    2009-2013 Nissan 370Z 3.7L
    2007-2013 Nissan Altima 3.5L
    2009-2014 Nissan Cube 1.8L
    2009-2014 Nissan Maxima 3.5L
    2009-2011 Nissan Murano 3.5L
    2011 Nissan Quest 3.5L
    2008-2013 Nissan Rogue 2.5L
    2014-2015 Nissan Rogue Select 2.5L
    2007-2012 Nissan Sentra 2.0L
    2007-2012 Nissan Sentra 2.5L
    2009-2011 Nissan Versa 1.6L
    2007-2012 Nissan Versa 1.8L

     

    Features:

     

    • Extensively Tested During Manufacture to Guarantee Quality and Reliability
    • Supplied With a Factory-Fitted Connector for Easy Installation

    • Precision manufactured with a sensing element incorporating premier technical ceramics

     

     

    Where are my oxygen sensors located?

     

     

    Diagnostic Trouble Codes (DTC)


    When oxygen sensor failure occurs, a DTC is recorded in the Engine Control Unit (ECU) and a Malfunction Indicator Lamp (MIL) is illuminated on the dash, alerting the driver the vehicle has a problem.

     

    How to replace an oxygen sensor?

     

    1- Disconnect the battery.

    2- Locate the sensor connector by following its wires. Disconnect it.?

    3- Remove the sensor cable from its clips all along its way to the sensor.

    4- A specific 22mm socket with side cut out exists (see below). You can use a spanner instead. Hold it in one hand and give it a firm hit with the other hand. It will then unscrew very easily.

    5- Remove the sensor and fit the new one.

    6- Re-route the cable carefully and meticulously and fix it at every clip. Reconnect the connector.

    7- Reconnect the battery and wait 5 minutes before starting the engine. 

     

                   

                   

            

     

     

    Please take a video clip of the voltmeter and contact us if our sensor:

     

    Goes above range between 0.1 and 0.9 volt
    Remains below 0.5 volts
    Stays fixed at a particular voltage
    You're free to choose replacement or refund if our sensor fails to work, in this case.


    Item Specifics
    Type Oxygen Sensor
    Manufacturer Part Number AUP82710600P
    Brand asucarparts
    Number of Pieces 2
    Fitment Type Direct Replacement
    Interchange Part Number 9594857, 234-4380,, O2 Oxygen Sensor
    Superseded Part Number 234-4121,
    Manufacturer Warranty 1 Year
    Custom Bundle Yes
    Modified Item No
    Position Upstream, Downstream
    Universal Or Specific Fit Specific
    Attachment Method Screw-On
    Thread Size M18
    Terminal Type Blade
    Thread Diameter 0.708 In.
    Heated Yes
    Hex size 7/8 in
    Number of Wires 4, 4
    Wires 4, 4
    Housing Material Metal
    Automotive Color / Finish Steel
    Technology Narrow-band
    Placement on Vehicle Before After Catalytic Converter
    Location Front, Rear
    Output Signal Range (V) 0.2 To 0.8 Volt
    Length 0 In.
    Bundle Description Include 2 Piece Oxygen Sensor
    Type Sensor
    Features Direct Fit

    Payment
    We accept PayPal only
     
    We only ship to verified PayPal addresses. Please make sure your PayPal address is verified and up to date before sending payment. We cannot change any address after checkout has been completed. Please make sure you submit your correct address!
    Shipping
    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
    2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-5 business days.
    3.Local pick up is not available.
    4. For domestic orders, If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
    5.International Buyers Please Note:
    a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. 
    Returns
    1.All of our brand new items come with a 60-Days money-back guarantee.
    2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
    3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
    4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost. 
    5.Shipping& handling cost are not refundable. 
    6.Man-made damage by abuse or wrong operation is not covered by this warranty.
    7.No product liability insurance is assumed.
    8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax. 
    FAQ
    Q: How do I pay for my purchase?
    A: MY store accepts PayPal. 
    Q: When will the item be shipped out?
    A: This item will be shipped with 2 business day once payment completed.
    Q: Where is my tracking number?
    A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
    Q: How do I return an item?
    A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. 
    Feedback
    1. We will leave positive feedback once we get your payment. 
    2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
    3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.

    Excellent Delivery
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    ✅2pcs for 2009-2011 Nissan Murano 3.5L Downstream 02 O2 Oxygen Sensor

    Fit Vehicles:

     

    1996-1997 Ford Probe 2.0L
    2008-2012 Infiniti EX35 3.5L
    2013 Infiniti EX37 3.7L
    2007-2012 Infiniti FX35 3.5L
    2013 Infiniti FX37 3.7L
    2009-2013 Infiniti FX50 5.0L
    2011-2012 Infiniti G25 2.5L
    2007 Infiniti G35 3.5L
    2008-2013 Infiniti G37 3.7L
    2007-2010 Infiniti M35 3.5L
    2013 Infiniti M35h 3.5L
    2011 Infiniti M37 3.7L
    2011-2013 Infiniti M56 5.6L
    2014-2015 Infiniti Q70 5.6L
    2015 Infiniti Q70L 5.6L
    2014 Infiniti QX50 3.7L
    2014 Infiniti QX70 3.7L
    2014 Infiniti QX70 5.0L
    2007-2009 Nissan 350Z 3.5L
    2009-2013 Nissan 370Z 3.7L
    2007-2013 Nissan Altima 3.5L
    2009-2014 Nissan Cube 1.8L
    2009-2014 Nissan Maxima 3.5L
    2009-2011 Nissan Murano 3.5L
    2011 Nissan Quest 3.5L
    2008-2013 Nissan Rogue 2.5L
    2014-2015 Nissan Rogue Select 2.5L
    2007-2012 Nissan Sentra 2.0L
    2007-2012 Nissan Sentra 2.5L
    2009-2011 Nissan Versa 1.6L
    2007-2012 Nissan Versa 1.8L

     

    Features:

     

    • Extensively Tested During Manufacture to Guarantee Quality and Reliability
    • Supplied With a Factory-Fitted Connector for Easy Installation

    • Precision manufactured with a sensing element incorporating premier technical ceramics

     

     

    Where are my oxygen sensors located?

     

     

    Diagnostic Trouble Codes (DTC)


    When oxygen sensor failure occurs, a DTC is recorded in the Engine Control Unit (ECU) and a Malfunction Indicator Lamp (MIL) is illuminated on the dash, alerting the driver the vehicle has a problem.

     

    How to replace an oxygen sensor?

     

    1- Disconnect the battery.

    2- Locate the sensor connector by following its wires. Disconnect it.?

    3- Remove the sensor cable from its clips all along its way to the sensor.

    4- A specific 22mm socket with side cut out exists (see below). You can use a spanner instead. Hold it in one hand and give it a firm hit with the other hand. It will then unscrew very easily.

    5- Remove the sensor and fit the new one.

    6- Re-route the cable carefully and meticulously and fix it at every clip. Reconnect the connector.

    7- Reconnect the battery and wait 5 minutes before starting the engine. 

     

                   

                   

            

     

     

    Please take a video clip of the voltmeter and contact us if our sensor:

     

    Goes above range between 0.1 and 0.9 volt
    Remains below 0.5 volts
    Stays fixed at a particular voltage
    You're free to choose replacement or refund if our sensor fails to work, in this case.

    Item Specifics
    Type :Oxygen Sensor
    Manufacturer Part Number :AUP82710600P
    Brand :asucarparts
    Number of Pieces :2
    Fitment Type :Direct Replacement
    Interchange Part Number :9594857, 234-4380,, O2 Oxygen Sensor
    Superseded Part Number :234-4121,
    Manufacturer Warranty :1 Year
    Custom Bundle :Yes
    Modified Item :No
    Position :Upstream, Downstream
    Universal Or Specific Fit :Specific
    Attachment Method :Screw-On
    Thread Size :M18
    Terminal Type :Blade
    Thread Diameter :0.708 In.
    Heated :Yes
    Hex size :7/8 in
    Number of Wires :4, 4
    Wires :4, 4
    Housing Material :Metal
    Automotive Color / Finish :Steel
    Technology :Narrow-band
    Placement on Vehicle :Before After Catalytic Converter
    Location :Front, Rear
    Output Signal Range (V) :0.2 To 0.8 Volt
    Length :0 In.
    Bundle Description :Include 2 Piece Oxygen Sensor
    Type :Sensor
    Features :Direct Fit


    We accept PayPal only
     
    We only ship to verified PayPal addresses. Please make sure your PayPal address is verified and up to date before sending payment. We cannot change any address after checkout has been completed. Please make sure you submit your correct address!
    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
    2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-5 business days.
    3.Local pick up is not available.
    4. For domestic orders, If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
    5.International Buyers Please Note:
    a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. 
    1.All of our brand new items come with a 60-Days money-back guarantee.
    2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
    3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
    4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost. 
    5.Shipping& handling cost are not refundable. 
    6.Man-made damage by abuse or wrong operation is not covered by this warranty.
    7.No product liability insurance is assumed.
    8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax. 
    Q: How do I pay for my purchase?
    A: MY store accepts PayPal. 
    Q: When will the item be shipped out?
    A: This item will be shipped with 2 business day once payment completed.
    Q: Where is my tracking number?
    A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
    Q: How do I return an item?
    A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. 
    1. We will leave positive feedback once we get your payment. 
    2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
    3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.

    asucarparts_All rights reserved.