About this item

• 3KG Maximum Load-Bearing: The suction cup has strong adsorption force, when the vehicle speed is 80km/h or below, the dynamic load can reach 3kg. The main body of the suction cup is made of rubber material, strong and wear-resistant, suitable for high and low temperature (-20~60°C), good sealing performance, and can be used on smooth, dry and flat surfaces.
• Quick Disassembly and Assembly: The magic arm and the suction cup are connected through the NATO rail, and the device can be disassembled and assembled quickly to improve shooting efficiency; The magic arm can be connected to devices, such as some lightweight cameras for Sony ZV-E10, for Canon EOS M50, or SMALLRIG 3084B, 4119 for GoPro11/10/9, for DJI Action 3, etc to realize vehicle-mounted shooting or indoor time-lapse photography.
• Warning Line Design: The suction cup is locked by a manual pump, with a warning line, which is safe and reliable; the suction cup is equipped with a dust cover to prevent the suction cup from being stained with dust when it is not in use, and prolong its service life. NOTE: During use, if the safety line of the air extraction valve is exposed, it means that air needs to be pumped immediately. Press the air extraction valve until the safety line is no longer visible before continuing to use.
• Multiple Mounting Points: The suction cup has multiple 1/4”-20 threaded holes, 3/8”-16 threaded holes, and positioning holes for Arri, which can be used with SMALLRIG 3757, 3873, 3874, 2906B, 2070B, 2115C and other brackets.
• Precautions: 1. Only use it on a clean, dry, flat surface, and check it at least every two hours. Do not use on rough, wet, uneven, unclean, fragile, or easily damaged surfaces; 2. Please keep the suction cup chassis and filter cotton intact and clean; if damaged or dirty, please stop using it immediately; 3. If there is a film on the surface of the adsorbed object, please use it with caution.

• Note:
  1. Suitable for clean, dry, and smooth surfaces, not for rough, wet, uneven, dirty, or fragile surfaces;
  2. When in use, please ensure the suction cup and filter cotton are intact and clean;
  3. Please apply it carefully to coated surfaces;
  4. When the warning-line indicator shows, it means vacuum loss. Pump the plunger until 100% vacuum pressure;
  Disclaimer: Please mount it onto recommended surfaces and check at least every two hours.

  Compatibility:                                   
  Universal

  In the Box:                                  
  4" Vacuum Suction Cup x 1
  Magic Arm x 1
  Silicone Ring x 2
  Action Camera Mount x 1

  Specifications：                                  
  Product Dimensions: 139.6 x 105.8 x 50.2mm
  Package Dimensions: 162.0 x 121.0 x 71.0mm
  Product Weight: 355.0 ± 5.0g
  Package Weight: 378.0 ± 5.0g
  Material(s): Aluminum Alloy, NBR, ABS, Stainless Steel