1K Epoxy Primer Speed Prime is a very fast curing, high adhesion primer for most metals.

• Smooth finish
• Black in Colour (label will initially say Buff / Beige, but it will be black in the can)
• High etching adhesion
• good chemical resistance
• Works on Iron, steel, light alloys, galvanised steel*
• Touch dry in as little as 60 seconds
• Overcoatable in as little as 5 minutes
• Compatible with most top coats
• Airless, Conventional, Aerosol, or brush roller application.

1K Epoxy Primer Speed Prime specifics

• Matt Finish
• Buff Beige colour
• 40% solids
• 13M2 coverage (theoretical)
• 1>2 coats to reach desired thickness

2K Epoxy Drying Times @25C

• Flash Off       10 minutes
• Dust Free       20 minutes
• Through Dry 12 hours
• Full Cure 28 DAYS
• Overcoating Window 0.5 > 8 hours hours max. sand after this depending on conditions.
• Shelf life 12 months if unopened

Airless spray: Tip size 11 – 13 thou (0.28-0.33mm) typical

Brush / roller for smaller areas only due to ultra fast cure times

T-wash new galvanised steel or allow to weather.