>>>Provide Bidirectional Capability of Testing Components & OE-Level Diagnosis of All Systems

• Systems Diagnose - Read/Clear Codes, Live Data Stream, Module Infomation, Freeze Frame, etc.

LAUNCH X431 IMMO Elite Plus automotive scanner can scan 120+ modules like ECM(engine), TCM(Transmission), ABS, SRS, Brake System, BCM(Body Control Module), EPS(Eletronic Power Steering), HVAC(Heat, Ventilation and Air Conditioning), TPMS(Tire Pressure Monitor System Reset) and so on to perform OE level diagnostics to read and clear codes, view live data stream, and retrieve ECU information, matching & adaptations, ECU Coding, allows you to get a faster and more accurate test result on all electronic systems.

• Bi-directional Control – Diagnose the Real Cause of the Troubles

LAUNCH X431 IMMO Elite Plus automotive scanner can perform Bi-directional Control over various car systems and components to determine the integrity of a system or parts like ABS, SRS, window, door, roof, by reading the ECU data, or by monitoring the operation of the actuators.

• Turn on the radiator fan
• Turn on/off the cooling fan
• Open/close windows
• Operate mirrors
• Turn on/off the lights
• Turn on/off the sound horn
• Test door lock actuators
• A/C Compressor Activation
• Modulate the throttle
• Compression test
• And More...

AFFORDABLE PROFESSIONAL KEY PROGRAMMING TOOL & ADVANCED IMMO FUNCTION SCANNER

>>>Work With X-PROG 3 For Further Extended Programming Capacibility

• IMMO Functions

1. Read PIN/CS(All Key Lost); 2. Key Generation; 3. Key & Remote Learning; 4. Anti-Theft Module Replace; 5. Engine/Gearbox ECU Replacement Cloning; 6. IMMO ECU Reset/Adaptation/Refresh/Coding; 6. Read&Write EEPROM/MCU Chip; 7. ECM MCU Reflash & Clone; 8. Generate Dealer Keys; 9. Renew/Read/Write Transponder; 10. Back/Restore IMMO Data; 11. Cloning in BENCH Mode without Diassembly; ...

• Key Programming

1. Add/Delete/Disable a Key Fob; 2. All Keys Lost; 3. Program a blank key fob; 4. Rewrite smart keys; ...

• XPROG 3 Functions

1. Car key slot-Place the car key to perform the key matching function; 2.DB26-Connect to various anti-theft wiring harnesses, such as the data collection line for the fourth generation of instrument keys, etc; 3. Mercedes-Benz key infrared slot-Place the Mercedes-Benz infrared key to perform the key matching function; 4. Car key chip hole-Place the key chip to perform key matching; 5. Status indicator-Power indicator; 6.DIY slot-Connect the anti-theft ECU pin through the cable to read and write data; 7. Locker Install chip burning socket-Complete EEPROM or MCU data read and write operations; 8.DC12V power supply-Connect DC12 power supply; 9.DB15-Connect the main wiring;...

• X431 IMMO Elite Plus Work with XPROG 3

1. BENCH Mode Reading; 2. ECU Replacement/Cloning; 3. Boot Mode Read Engine; 4. Read/Write CAS4+, FEM; 5. Read & Write Key Chip; 6. Read MEDI7; 7. Read & Write EEPROM; 8. BOSCH Engine Replacement; 9. IMMO ECU Reset/Coding; 10. Read BMW Engine ISN Code; 11. Read PIN Code; 12. IMMO Module Replacement; 13. Add Transponder/Smart Key; 14. Read/Write/Backup IMMO Data; 15. All Key Lost; 16. Read & Write Mercedes Benz Infrared Keys; 17. Disable Lost Keys; 18. MQB Gearbox Replacement for VW & Audi; 19. Add Key; 20. BMW E Chassis 8HP Gearbox ECU Program Wiping; 21. Backup EEPROM Data; ...

>>>ECU CODING Customize Your Car Easily!

Every automobile actuator has a record code in ECU, which is the basis for automobile computer to mobilize their work. LAUNCH X431 IMMO ELITE PLUS is equipped with advanced ECU coding function for addressing the following issues :

• Component Matching:

After you change the bad actuators or certain parts, you need to use this function to make a new code and recognize the new actuators.

• ECU Online Coding:

ECU coding enables multiple car systems to recognize each other and then the actuators can start to work.

• Personalization:

Unlock hidden features,deactivate annoying features.

• Variant Coding(Offline Programming)

Variant coding is programming ECUs to meet vehicle variants, such as left-hand drive or right-hand drive.

There are tons of ECU CODING functions you need, such as:

1.Acoustical confirmation 2.Active Rear Spoiler 3.SiriusXM coding 4. Digital speedometer coding 5.Start & Stop button coding 6. Remote window control unlocking 7.Acoustic pedestrian protection 8.Active Cruise Control 9. Air conditioning setting memory 10.Automatic Air Recirculation 11.Ambient lighting brightness, And More .....

Note: ECU Coding is not universally compatible with all vehicles! Please provide us VIN number/year/model via kingbolen-sales02@ hotmail.com to check compatibility first.

>>>All-in-One Key Programming Tool & Diagnostic Services - Saving maintenance time and money for you

• [39+ Special Service]

1. Brake Reset : After replacing the brake pads, you need to reset the position of the brake pads before installing the new brake pads to close the warning light.
2. Oil Reset: Close the oil service light, reset service mileage & service interval after replacing the engine oil, and the next maintenance calculation cycle is entered.
3. SAS Reset: Learn to correct the angle and solve the problem of the steering angle of the steering wheel.
4. Battery Matching: Use the power management system, the battery needs to be re-matched after the battery is replaced, so that the car computer can recognize the new battery.
5. ABS Bleeding : When changing a new brake fluid, there is a high possibility that air will enter the brake fluid pipeline. In the traditional way, one person steps on the brake and another person changes the operating fluid. This function can perform the brake operation, and only one person is required to change the brake fluid.
6. SUS Reset : This function needs to be performed to level the body height sensor in the air suspension system when the body height sensor and the control module or the car is leveled incorrectly.
7. TPMS Reset: When replacing TPMS sensors or the signal from the sensor is lost it can quickly look up the tire sensor from the vehicle’s ECU, reset tire pressure and turn off the tire pressure MIL.
8. GEAR Reset: The vehicle has a crankshaft position sensor. This sensor collects the 58-tooth signal of the flywheel to determine the top dead center ignition time of a cylinder (reference signal). If this sensor is replaced, the reference will be lost, and gear signal learning is necessary.
9. Injector Reset (Injector Coding) : The engine injector has a code. After replacement, you need to write a new code into the computer so that the car computer can correctly identify the injector.
10. AFS Reset: It can detects the ambient light and then decides whether to turn on the headlights automatically. It can also adjust the headlights in time by monitoring the speed of the vehicle and the posture of the body.
11. Throttle Adaptation: Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state.

AC System Relearn, Headlamp, AdBlue Reset, Air Level Calibration, Coolant Bleeding, Crank Position Sensor Adaptive Learning, Engine Power Balance, GPF Regeneration, Gearbox Relearn, HV Battery Diagnostics, IMMO Programming, Intelligent Cruise Control System, Language Change, Motor Angle Calibration, Seat Occupancy Calibration, Stop/Start Reset, Sunroof Reset, Tire Reset, Transport Mode, Windows Calibration, Clutch Matching, Turbocharging Matching, Gateway Module Data Calibration, ECU Reset, Rainfall Light Sensor, More Features Keep Growing...

• [Full OBD2 10 Modes]

Support the full-model system-wide diagnosis of basic functions all 10 modes of standard to ensure complete, accurate, system diagnosis. Read and Clear DTCs, do smog tests , I/M readiness and O2 sensor tests, Mode 06 EVAP system test, Mode 08 on-board test component test for global 110+ brands. And Code lookup tool and acronym database to assist and speed diagnosis and repair time.

>>>Cover 99% 1996-2023 Worldwide Vehicles, Continuously Growing With Updates

LAUNCH X431 IMMO ELITE PLUS is an anti-theft matching tool, support the ECM and TCM module's clone and support module main supplier BOSCH, Continental and/or Siemens, DELCO, ZF, GETRAG and Temic etc. The advantages of anti-theft module replacement and anti-theft module cloning for sperate brand are listed as follows:

• For VW

1. Volkswagen Audi IV and V key matching; 2. The fourth generation of Volkswagen instruments are completely lost (partially); 3. The fourth generation of Volkswagen free account is lost (part); 4. Audi 5th generation steering column chip reading and writing; 5. Reads the fourth generation MED17/EDC17; 6. Replacement of Volkswagen Audi MQB engine, wave box and steering column; 7. Volkswagen Audi 5th generation and MQB transmission FLASH and EEPROM reading and writing; 8. Volkswagen Audi BOSCH engine clone; 9.Volkswagen Audi Siemens engine clone; 10. The function of adding and losing all the keys of the fourth generation instrument of Volkswagen Online; 11. MQB key increase and key loss function of Volkswagen online fourth-generation instrument; 12. The fourth generation of Volkswagen instrument (5ND920873B) lost all its keys and replaced the instrument; 13. The UDS engine replacement function after 2014, the fourth generation instrument+the fifth generation Bosch engine (the original vehicle engine is not required)

• For Benz

1. Benz key matching (FBS3); 2. Benz engine, wave box brush empty (FBS3); 3. Benz gear shift computer is empty (FBS3 and before); 4. Benz engine clone (FBS4); 5. Benz Wave Box Clone (FBS4); 6. Benz key added calculation password (FBS3); 7. Benz lost all keys calculation password (FBS3); 8. Benz lock replacement (FBS3)

• For BMW

1. BMW (CAS1, CAS2, CAS3, CAS4, FEM/BDC); 2. BMW engine ISN code reading; 3. BMW E chassis 8HP wave box is empty; 4. BMW E chassis 8HP wave box clone; 5. BMW F chassis 6HP wave box brush empty/clone; 6. BMW F/G chassis 8HP wave box clone; 7. BMW F/G chassis 8HP wave box is empty; 8. BMW engine replacement; 9. BMW BOSCH engine clone; 10. BMW Siemens engine clone

• For Porsche

1. Porsche 2011-2017 key matching; 2. Porsche front-end and back-end computer cloning; 3. Porsche Siemens engine computer clone; 4. Porsche battery data repair

• For More

1. US Ford anti-theft initialization; 2. US GM Module (anti-theft) cloning; 3. Most models of Peugeot Citroen are read by the engine ECU anti-theft password; 4. Volvo Link BCM anti-theft and password reading; 5. Toyota; 6. Honda; 7. Nissan; 8. Mitsubishi; 9. Kia; 10. HYUDNAI; 11. China Ford anti-theft module programming; 12. China Ford anti-theft module anti-theft initialization; 13. China GM Programming, configuration, setting and deletion; 14. Programming, setting and setting of Roewe anti-theft system; 15. Programming, setting and setting of MG anti-theft system; 16. Second-hand new Yinglang, new Kaiyue and other anti-theft passwords 17. Great Wall Motors PIN reading and anti-theft matching; 18. Dongfeng Fengshen reading PIN and anti-theft matching; 19. Dongfeng Fengxing PIN reading and anti-theft matching; 20. Geely Car PIN reading and anti-theft matching; 21 FAW car PIN reading and anti-theft matching; 22. Zhengzhou Nissan PIN reading and anti-theft matching; More Features Keep Growing..