Mobula7 1S
Available for purchase separately:
1x Mobula 7 drone: https://www.youtube.com/watch?v=pcSzNeLcWdI
1x Jumper T lite v2 ELRS/M2 transmitter/controller/joystick: https://www.youtube.com/watch?v=Z3XkdYACSy0
1x FPV goggles Skyzone Cobra X https://www.youtube.com/watch?v=_NSWHVPTTig&t=8s
1x Transmitter battery 18650
1x 1S drone battery Gaoneng 520mAh
1x Spare props x4
1x Spare frame
1x Mini 5.8G FPV Receiver UVC Video Downlink OTG VR (use video stream on your phone by connecting this receiver via usb port to your phone)
See: https://www.youtube.com/watch?v=NNUEh-uaZ10&t=369s
All items are brand new and ships from Sydney.
If your order includes batteries, then the order will ship via ground post.
Happymodel Mobula7 Mobula 7 1S Micro FPV BWhoop Drone 5IN1 AIO Flight Controller Built-in 2.4G ELRS V2.0 RX Nano3 1/3 CMOS
We’re glad to launched our new Mobula7 drone , this time the 75mm whoop based on 1s power. Thanks to the new AIO flight controller and the new third-generation RS0802 brushless motor, the new Mobula7 1s Will be the best choice in the whoop season.
The world first 5-IN-1 AIO flight controller with ExpressLRS 2.0 , OPENVTX(up to 400mw), 12A Brushless Blheli_S ESC and Betaflight OSD coming out recently. This is amazing flight controller for Brushless whoop. You could get unbelievable RX and VTX range by using this flight controller.
The new RS0802 motors comes with a new unibell design, use 1.5mm shaft and include PCB bottom plate, high efficiency and much more reliable.
New onboard OpenVTX , max power up to 400mw, provide RCE and PIT mode, it was very useful for race event.
Mobula7 1S HD version is a light and efficiency 75mm brushless whoop which provide 1080P HD video record function. A highly integrated AIO Flight Controller, supports ESC with a maximum current output of 12A. We added blackbox for this 1s 75mm HD recorder whoop. Now it could support gyroflow. Although the external blackbox is not install perfectly and insert SD card is not friendly to most of the people, however we still think it's really excited for this small whoop could record a video with gyroflow steady and keep safe flying .
Features:
X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and Openvtx
VTX Power up to 400mw
ELRS V2.0 Support
NEW RS0802 KV20000 motors
Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera
Smooth and powerful
Compatible for1S Lipo/LIHV
Recommend 1S 450mah/550mah/650mah battery(Not include)
Specifications:
Brand Name:Happymodel
Item Name:Mobula71S75mmMicro FPVwhoop drone
Wheelbase: 75mm
Size: 99mm*99mm*40mm
Weight: 24g
Receiver option:
2.4G ELRS SPI
Package includes:
Item Name | Qty |
Mobula7 1S 75mm whoop Drone Frame (Mobula7 v4 frame) | 1 |
Option1: X12 ELRS V1.0 flight controller built-in SPI ELRS 2.4G receiver | 1 |
RS0802 KV20000 brushless motor | 4 |
Gemfan 1610-2 bi-blade propellers(4cw+4ccw) | 1 |
Runcam Nano3 1/3 CMOS 800TVL camera | 1 |
Onboard 5.8G Openvtx 0mw~400mw VTX | 1 |
1S parallel charging board | 1 |
Propeller disassemble tool | 1 |
Extra camera canopy | 1 |
Spare parts specifications:
Motor | Mode:RS0802 KV20000 |
Propellers | Weight:0.24g Material:PC Pitch:1 inch Props Dia:40mm Center Thickness:5mm Center Hole Dia:1.5mm |
Flight controller | X12 ELRS V1.0 flight controller built-in ELRS 2.4G receiverTarget: CRAZYBEEF4SX1280 X12 Frsky V1.0 flight controller built-in SPI Frsky 2.4G receiverTarget: CRAZYBEEF4FR X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiverTarget: CRAZYBEEF4FS X12 PNP V1.0 flight controller without onboard receiverTarget: CRAZYBEEF4DX MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Built-in Betaflight OSD(SPI Control) Built-in current sensor |
Onboard 4in1 ESC | Power supply:1S LiPo/LiPo HV Current:12A continuous peak15A (3 seconds) Support Bluejay firmware |
Onboard SPI ExpressLRS 2.4GHz Receiver | Packet Rate option: 50Hz/150Hz/250Hz/500Hz ExpressLRS Firmware version: V2.0 Antenna : SMD antenna Receiver protocol: SPI ExpressLRS Compatible with ExpressLRS V2.0 TX Module Couldn’t flash separately ExpressLRS firmware |
OnboardFrskySPI D8/D16 receiver Version | SPI BUS receiverFrsky D8compatible Channels: 8ch Failsafe support |
OnboardFlyskySPIreceiver Version | SPI BUS receiver |
PNP Version (without onboard receiver) | Full UART1 for external Receiver Support CRSF/GHOST/SBUS/IBUS/DSMX protocol IR1 pad(invert RX1) used for SBUS input |
Onboard 5.8g OPENVTX | Firmware version: OPENVTX Smartaudio v2.1 PIT Mode support RCE Mode support Channels:48ch Transmitting Power:0/RCE/25mw/100mw/400mw Power supply: DC5V Current (5v): <650ma (400mw) |
Runcam Nano3 | Model:RunCam Nano 3 Image Sensor:1/3" CMOS Horizontal Resolution:800TVL Lens:2.1mm(M8) FOV 150° Signal System: NTSC S/N Ratio:>50dB Electronic Shutter Speed:Auto Auto Gain Control (AGC):Auto Min. Illumination:0.01Lux@1.2F D-WDR:Auto Day/Night:Color Power:DC 3-5.5V Current:110mA@5V 120mA@3.3V Housing Material:ABS Net Weight:1.2g Dimensions:L14mm*W14mm*H9mm |
Lipo Battery (not include) | Capacity:650mAh Connector:PH2.0 |
Mobula7 1S HD version is a light and efficiency 75mm brushless whoop which provide 1080P HD video record function. A highly integrated AIO Flight Controller, supports ESC with a maximum current output of 12A. We added blackbox for this 1s 75mm HD recorder whoop. Now it could support gyroflow. Although the external blackbox is not install perfectly and insert SD card is not friendly to most of the people, however we still think it's really excited for this small whoop could record a video with gyroflow steady and keep safe flying .
Features:
X12 5-IN-1 AIO flight controller
VTX Power up to 400mw
ELRS V2.0 Support
NEW RS0802 KV20000 motors
1080P HD Video record
Blackbox Ready support GYROFLOW
Smooth and powerful
Compatible for 1S Lipo/LIHV
Recommend 1S 450mah/550mah/650mah batteries (Not include)
Specifications:
Brand Name: Happymodel
Item Name: Mobula7 1S HD 75mm Micro FPV whoop drone
Wheelbase: 75mm
Size: 99mm*99mm*45.5mm
Weight: 33g
Receiver option:
SPI 2.4GHz ELRS V2.0
SPI Frsky D8/D16
Package includes:
Item Name | Qty |
Mobula7 1S 75mm whoop Drone Frame (Mobula7 v4 frame) | 1 |
Option1: X12 ELRS V1.0 flight controller built-in SPI ELRS 2.4G receiver | 1 |
Option2: X12 Frsky V1.0 flight controller built-in SPI Frsky 2.4G receiver | |
External Blackbox Module support gyroflow | 1 |
RS0802 KV20000 brushless motor | 4 |
Gemfan 1610-2 bi-blade propellers(4cw+4ccw) | 1 |
Runcam Split3-Lite Camera+1080P DVR | 1 |
1S series balance charging board | 1 |
Propeller disassemble tool | 1 |
Spare parts specifications:
Motor | Mode: RS0802 KV20000 |
Propellers | Weight:0.24g |
Flight controller | X12 ELRS V2.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280 |
Onboard 4in1 ESC | Power supply: 1S LiPo/LiPo HV |
Onboard SPI ExpressLRS 2.4GHz Receiver | Packet Rate option: 50Hz/150Hz/250Hz/500Hz |
Onboard Frsky SPI D8/D16 receiver Version | SPI BUS receiver Frsky D8 D16 compatible |
Onboard 5.8g OPENVTX | Firmware version: OPENVTX |
Runcam Split3-Lite | Model: RunCam Split3-Lite |
External Blackbox and voltage booster module | Size:18*15.5*4.5 |