eBay

Supplied:

1 Migro FX Board Controller 20 i/o; 12 DC Inputs,
8 Relay Outputs
1 USB Interface Programming Cable
1 DIN Power Supply 24V input 120/240VAC

FREE Ladder Logic Software
with BONUS Training Course

The basic ladder logic Programming software

Software for Windows 10, 32bit.
Software is FREE, cost include examples and data compilation

BONUS a training course in ladder logic, from the basic functions to advanced applications as used in the industry today.

1 - PLC Ladder Logic
GX Developer Programming Software GX-DEV FX- 8.25

Open Software includes Programming and Hardware Manual

Features: 1000 steps Ladder Diagram, and Instruction List

Software supports all this FX processors

FX0/FX0S, FX0N, FX1S, FX1N, FX(FX2/FX2C) FX2N/FX2NC.

FX3u

FX MELSEC single user FX Win Version 8.25, 1000 step for FX PLCs controllers series.
This is the standard software easy to use and simple, intuitive interface and a short learning curve.

Full upload and download, monitor, test and program all the Mitsubishi FX-series PLC
package includes CD with the software and manuals in electronic format for programming and hardware installation .

2 - Hardware Features: FX1N-20mr

PLC with 12 Inputs and 8 Relay Outputs
This programmable logic controller uses industrial-grade 32-bit MCU with strong anti-interference and faster speed.
High quality chip, stable performance, on-line download, on-line monitoring, automatic save when power off.
Program is written in ladder logic programming language, supports for GX-Developer, GX-work2.
Programming port is the port for program upload, download, test and monitor.
It is reusable, stable, easy to learn. The PLC transmission baud rate is 9600.

Specifications:
Model: FX1N-20mr
Operating Voltage: DC24（V）
Wide Power Supply Voltage: 10-28VDC
Baud Rate: 9600
Programming Software: for GX-Developer, for GX-work2.
Size: Approx. 86 x 73 x 20mm / 3.4 x 2.9 x 0.7inch
Weight: 120G

Module function:
This module is programmable control, can achieve thousands of functions, stable and reliable working performance, built-in watchdog timer circuit, to ensure that the module for a long time to run!!!
Some of the common features are shown as follows:

Turn on the power supply, the relay 1 is closed for N seconds and then disconnect the relay 2 for N seconds.
When the power supply is turned on, the relay 1 is switched off after N seconds, and then the relay 2 is closed for N seconds and then is turned off.
The power supply is switched on, the relay 1, 2 have no action, when a signal or trigger button, relay 1 closed off after N seconds; then relay 2 closed off after N seconds, until the next trigger, repeat the same action.
Through the signal 1, 2 programming, the control can be achieved on the relay 1 and 2 arbitrarily.
When the signal 1 has a signal, the relay 1 is closed, the relay 2 is disconnected; when the signal 2 has a signal, the relay 1 is turned off, and the relay 2 is closed.
Can be connected to the NPN sensor signal, the sensor signal programming, to achieve arbitrary control of the relay.
When the signal 1 is triggered, the relay 1 is controlled, and when the signal 2 is triggered, the relay 2 is controlled.
Turn on the power supply, the control motor is turning N seconds, and then reverse N seconds, followed by the cycle.
When the signal 1 has a signal, the motor is controlled to rotate; when the signal 2 has a signal, the motor is reversed.

These are just some examples, modules can achieve far more than these functions

Input high speed pulse C235, C251 and FX1N compatible.
Output relay 1A output, Rated current 5A, can directly drive DC solenoid valve, AC solenoid valve, AC contactor, AC motor, etc,.

Precautions for use:

The PLC with two programming port. The 232 interface, you can directly use the USB-232 serial port with a computer to download the program directly. The TTL interface.
Built-in Analog input AD, corresponding to internal data register D5030.(Not D8030)
Built-in Analog output DA, corresponding to internal data register D5101.
When the PLC need to connect with the touch screen or text, can be used to connect 232 programming port.

Assistant Relay	Normal Use	M0 - M383
	Hold After Power Off	M384-M1535
	Special Use	M8000-M8255
State	Holding Use	S0-S999
Timer	100MS	T0-T199
	10MS	T200-T245
	1MS	T246-T249
	100MS accumulation	T250-T255
Counter	16-bit	C0-C15(0-32767)
	16-bit(Hold After Power Off)	C16-C199
	High Speed(Hold After Power Off)	C200-C255
Data Register	16-bit	D0-D127
	16-bit(Hold After Power Off)	D128-D5029
	16-bit Special Use(AD)	D5030(Output Voltage: 0-10V)
	16-bit Special Use(DA)	D5101(Output Voltage: 0-3.3V)

Software is Open Version, Free Cost is the compilation and practical example programs

Mitsubishi PLC, GX-Developer, GX-work2. are a registered trade marks of Mitsubishi Electric

Windows is registered trade mark of Microsoft Corporation