2K Epoxy  High Build Tintable Primer zinc rich 5L

2K Epoxy Tintable, with self etching high adhesion., and activated zinc phosphates

• Smooth finish
• High etching adhesion
• Superb chemical resistance
• Works on Iron, steel, light alloys, galvanised steel*

2K Epoxy Product specifics

• 4:1 mixing ratio
• Dilute 5>10% for spraying
• can be brush / roller applied
• Airless or conventional spray compatible.
• 1>2 cats to reach desired thickness

2K Epoxy Drying Times @20C

• Flash Off       10 minutes
• Dust Free       30 minutes
• Through Dry 24 hours
• Full Cure 28 DAYS
• Overcoating Window 6>96 hours max. sand after this depending n conditions.

2K Epoxy Oven Times

Flash off 10 mins, 50C for 30 mins

2K Epoxy Coverage

7m2/ Litre @ 50um DFT

2K Epoxy Chemical Data

SG 1.3

VOC 400g/l

2K Epoxy Additional Information

1L Kit comes with 720ML base, / 200ml Hardener+ pot of colour to be added to the main tin.

5L Kit comes with 3.6L base, 1L Hardener + 500ml pot of colour to be added to the main (base) tin.

See site for Technical data sheet before use. Once hardener is mixed cure will begin. Do not mix up more than you need for each 60 minutes of use.

Please note. The total volume of each "kit" will vary by up to 5% based on how much tint is required to be added by us prior to dispatch.