TBK 988Z curved screen frame LCD separation OCA glue removal repair heating machine built-in vacuum pump for mobile phone iphone samsung

Detailed Steps

1. Turn on the power: Plug the power cord into the power connector on the back of the separator, and turn on the power switch
2. Preset temperature: Press the SET button to preset the temperature, press the up button to set the temperature to about 85 degrees, and press NET to save
3. Prepare the wire handle: equipped with a wire handle to separate the screen
4. Place the silicone non-slip mat: put it on the panel of the separator, align the rubber mat with the panel holes
5. Screen separation preparation: Put the screen to be separated in the center of the panel, press the start key to start vacuum adsorption, and ensure that the screen is held
6. Start cutting the screen: the screen is preheated for 3-5 minutes to start cutting
7. After removing the bad screen, turn off the power of the separator. If it is dry glue, you can directly tear it off. If the water glue needs to be removed with the help of a blade and a glue removing solution

parameter

Product model: TBK 988Z
Brand: TBK
Operating Voltage: 110V/220V
Product power:250W
Product Size:24*13.5*15cm
Workbench area:8*18.8cm(7 inch)
Package Size:31*21*18cm
Net weight:2.6kg
Gross weight:3kg
1. Can be used for straight screen or curved screen to remove glue LCD separation maintenance etc.
2. The heating table can rotate 360 degrees, the working temperature is 85℃, the highest temperature is 350℃, and the maximum support is 7 inches
3. Built-in double vacuum pumps, strong suction, to ensure that the phone is firmly fixed
4. Thermal insulation non-slip silicone pad, high temperature resistant insulation material ddoes not affect the suction, you can also choose not to use silicone pad
5.The heating platform is protected by a fuse to prevent burnout

(1).BUILT-IN DOUBLE VACUUM PUMP,360°FREE ROTATION

Front and rear removable movable clamps
Separation of curved screens and glue removal with frames

(2).CAREFULLY CRAFTED WORKBENCH FRAME GLUE REMOVAL AND SEPARATION FUNCTION

Less of 7 inch
Frame degumming
separate
Front and rear movable clamps
screw fixing
Special suction holes

(3).SPECIAL ALUMINIUM

smooth
quick to heat
no wear

(4).Build-in double vacuum pumb,new upgrade, super suction

(5).HEATING TABLE COULD MOVE 360°

More intimate design Could be operated from different angles

(6).DETAILS DETERMINE QUALITY

VISUAL TEMPERATURE
CONTROL PANEL
Visual temperature control Precise data control
temperature presets


COOLING HOLES
There are cooling Vents on both sides, Effectively alleviate
the high internal temperature of the fuselage

REAR FUSE
Safety protection Against product damage

(7).Product Information

BRAND: TBK
MODEL: 988Z
VOLTAGE: 100V-240V
POWER: 250W
NET WEIGHT: 2.6KG
PACKAGE WEIGHT: 3.0KG
MACHINE SIZE: 25*13.5* 14CM
PACKAGE SIZE: 32*21*18CM
SCOPE OF APPLICATION:
SCREEN SIZE: 19*8CM
Up to 7 inches