Listing is for:

750ml , 1ltr or 2.5lt

RAL7016 Anthracite Grey Multi Surface Paint

GLOSS finish Only - (Satin or Matt finish is NOT available/manufactured)

(Images is for colour guidance only and is not indicative of the product or finish) 

Direct to surface Paint & primer in one

Quick drying

Interior and exterior

DESCRIPTION Rust-Oleum CombiColor Multi-Surface 7300 coating is a solvent based primer and topcoat in one, based on a modified Alkyd binder, providing good adhesion to many types of substrates. The product is lead- and chromate free.

RECOMMENDED USE Rust-Oleum CombiColor Multi-Surface 7300 can be applied on many different substrates like wood, metal, mdf, masonry, tiles, most rigid plastics, old concrete and more. We advise to do a small adhesion test prior to the application of the full surface.

CombiColor Multi-Surface is intended for brush and roller application.

For metal structures in a more aggressive industrial environment we advise CombiColor Original in combination with RustOleum CombiPrimer Anti-Corrosion 3369/3380. 

DRYING TIMES AT 20°C/RH 50% Touch dry: 4 hours (20°C), 6 hours (10°C), 2 hours (30°C) Dry to handle: 8 hours (20°C), 16 hours (10°C), 6 hours (30°C) 

Dry to recoat: 16 hours (20°C), 24 hours (10°C), 8 hours (30°C)

Fully cured: 7 days (20°C), 14 days (10°C), 5 days (30°C)

THEORETICAL CONSUMPTION 9 - 10 m²/l at 45 µm dry per coat, depending on colour.

PRACTICAL CONSUMPTION Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.

SURFACE PREPARATION Remove oil, grease and all other surface contaminations by alkaline cleaning in combination with appropriate detergents. Remove rust scale, loose mill scale, loose rust and loose coatings by scraping, wire brushing or sanding. Sand intact coatings to roughen the surface slightly. Test before application the compatibility with the old coating. The surface must be clean and dry during application. New galvanised (bright aluminium-like finish), Zinc and Aluminium (new and old) surfaces have to be primed first with CombiPrimer 3302. Aged galvanized (matt grey appearance, showing white rust) should first be cleaned with an acid cleaner (e.g. Rust-Oleum SE108) or by mechanical abrasion with for example ScotchBrite. Very porous surfaces should be sealed prior to application of CombiColor Multi-Surface. DIRECTIONS FOR USE To ensure homogeneity, coating materials should be thoroughly stirred prior to use.

Roller application may require 2 coats to achieve recommended dry film thickness Thinning generally not required.