 Dental Wireless Cordless LED Curing Light Lamp Woodpecker DTE Style 1 Sec Cure100% brand new and high quality Good price! High quality!WOODPECKER LED.B: Feature:
1. 100% guaranteed original Woodpecker. Each item has unique serial number, which indicate in which region it is supposed to be sold. Woodpecker is strict with that regulation of according regional sale. As ours are to be sold in China only, we have to erase it from item, which would cause scratch-like mark. That is no damage, pls note this clearly! 2. Wireless. 3. Time setting: 5s, 10s, 15s, 20s. 4. Large capacity battery. A full charge can be used for more than 500 times continuously under 10s working time mode. 5. Low standby power consumption with seventy days` standby time. 6. Constant light intensity. The solidification effect is not affected by the consumption of remaining power. Technical Parameter 1. Power input: AC100V-240V 50Hz/60Hz 2. Light output: 1000mW/cm² -1200mW/cm² 3. Net weight: 145g 4. Dimensions: 260mm×31mm×34mm LED B Packing List 1 X Curing light 1 X High capacitance rechargeable battery 1 X Charger 1 X Charger socket *********************************************************************************************************************
LY-A180(Green/White/Purple/Black):
Classic rechargeable light curing unit: Environmental colorful plastic shell; Lotus charging pedestal; Handle can be placed horizontally / upright, to ensure that the light guide stick is not easy to break; 5W high power LED; High permeability rate of glass fiber-optic, strong, flashing, gradually strong 3 modes, large capacity lithium battery, automatic standby/shutdown, low battery warning, suitable for all brands of resin materials; long standby time of 90 days or more. Be charged one time, in accordance with each working time of 20 seconds, it can be used continuously for more than 130 times. Operating mode diagram: 1. Power switch 2. Low battery alert 3. Strong mode indicator light 4. Flashing mode indicator light 5. Gradually strong mode indicator light 6. Mode select switch 7. Be adjusted in 5-40 seconds, shut down automatically . Without any operation in 20 seconds. Technical data: 1. Package: 190×98×60m 2. Suitable temperature: 5~50 3. Solidify time and depth: 5s/3mm 4. Light wavelength: 420-480nm 5. Light intensity: 1200-2000mw/cm2 6. Gross Weight: 0.30Kg 7. Input Voltage: 110V-240VAC, 50-60Hz 8. Output Voltage: DC 4.2V 9. Battery: Lithium-ion battery 10. Capability of Battery: 2200mA *********************************************************************************************************************
Xlite2 neo:
1. Light Source: Broad Band LED;
2. Wavelength Range: 385 - 515 nm; 3. Light Intensity: > 2300mW/cm²; 4. Battery: Lithium-ion battery (total running time when the battery is fully charged: at least 80 minutes); 5. Power Adapter Input Power: AC 100-240V 50 / 60Hz; 6. Charging time: about 45 minutes. 7. Size:Handle: Φ20 mm × 240 mm; Charging stand: Φ63 mm × 30 mm(all of the above are the largest size) 8. Weight: Handle: 96 grams; Charging seat: 99 grams; 9. Operating ambient temperature: + 10 - + 40(+ 50 °F - + 70°F); 10. Operating relative humidity: 30% - 75%; 11. Operating environment pressure: 700hPa - 1060hPa; 12. Color Choose: White/ Black Radomly color Package Contents: 1 × host handle; 1 × charging base; 1 × power adapter; 1 × user manual. Operation and function description: The entire handle is only one button, light built-in button. 1. For the first time, charge the light curing handle first. Plug the USB 2. cable of the charger into the USB port of the power adapter, plug the power adapter into the power socket, and finally Put the handle on the charging stand; or, insert the USB cable plug of the charging stand into the USB port of the computer, and then put the handle on the charging stand. Charging instructions are as follows: | Emerald Flashing | Battery charging; | Emerald green light | battery fully charged; handle removed the charging seat, the restoration of the previous working mode. 3. Working mode selection, by pressing the button for 2 seconds to 4. release to switch the working mode. | Blinking Blue | Progressive mode, working time 10 seconds, light intensity 0-5 seconds from 0-1200mW / cm², 5-10 seconds 1200mW/cm². | Solid blue | Fast mode, working time 3 seconds, light intensity 2300mW / cm ² 3. Turn the light curing lamp on and off, press the button briefly. 4. Switch machine, in standby mode, press the button a short time to open the instrument; stop any operation for 60 seconds, into the ultra-low power standby. Package including: 1 Set ( radomly color) *********************************************************************************************************************
iLED (White/Black Optional):
Feature:
1. Light Source: Broad Band LED;
2. Wavelength Range: 385 - 515 nm; 3. Light Intensity: > 2300mW/cm²; 4. Battery: Lithium-ion battery (total running time when the battery is fully charged: at least 80 minutes); 5. Power Adapter Input Power: AC 100-240V 50 / 60Hz; 6. Charging time: about 45 minutes. 7. Size:Handle: Φ20 mm × 240 mm; Charging stand: Φ63 mm × 30 mm(all of the above are the largest size) 8. Weight: Handle: 96 grams; Charging seat: 99 grams; 9. Operating ambient temperature: + 10 - + 40(+ 50 °F - + 70°F); 10. Operating relative humidity: 30% - 75%; 11. Operating environment pressure: 700hPa - 1060hPa; 12. Color Choose: White/ Black choose the color you like Package Contents: 1 × host handle; 1 × charging base; 1 × power adapter; 1 × user manual. Operation and function description: The entire handle is only one button, light built-in button. 1. For the first time, charge the light curing handle first. Plug the USB 2. cable of the charger into the USB port of the power adapter, plug the power adapter into the power socket, and finally Put the handle on the charging stand; or, insert the USB cable plug of the charging stand into the USB port of the computer, and then put the handle on the charging stand. Charging instructions are as follows: | Emerald Flashing | Battery charging; | Emerald green light | battery fully charged; handle removed the charging seat, the restoration of the previous working mode. 3. Working mode selection, by pressing the button for 2 seconds to 4. release to switch the working mode. | Blinking Blue | Progressive mode, working time 10 seconds, light intensity 0-5 seconds from 0-1200mW / cm², 5-10 seconds 1200mW/cm². | Solid blue | Fast mode, working time 3 seconds, light intensity 2300mW / cm ² 3. Turn the light curing lamp on and off, press the button briefly. 4. Switch machine, in standby mode, press the button a short time to open the instrument; stop any operation for 60 seconds, into the ultra-low power standby. *********************************************************************************************************************
2001B:
Specifications:
Light Density ≥2700mW/cm Battery 3500mAH Input Voltage :AC100-240 Power: 12W Wavelength400nm - 490nm Features: 1. Lithium battery 2. Pure LED blue light and no flicker 3. Aluminium body 4. 3 second can make it! (selection from 2-6 seconds) Package 1. Light guide 2. Circular eye-protector 3. power adapter 4. Charging base 5. Main body 6. Manual *********************************************************************************************************************
iLED 1Second Curing Light:
1.INTRODUCTION
This product is used in fast solidification by lighting dental resin. It is a new generation of standard developed LED curing light, with humanity intelligent chip, the world advanced high intensity LED light and Li-on rechargeable battery. It can cure all the dental resin in the market nowadays, 2.PACKING LIST Main Body: 1Pc Light Source:: 1Pc Charge Base: 1Pc Adapter: 1Pc USB cable: 1Pc Light Protect: 1Pc Lens: 5pcs Test block:2pcs 3.TECHNICALPARAMETERS 3.1 Main Unit Battery Voltage DC3.7V Battery Capacity 1500mAh Wave Length 385515nm Light Density P1(9W) ≥ 2300mmw/cm² P25W≥1200mw/cm² Charging time 3 hours approx Weight 550g Packing size L205 x W109 x H77mm 3.2AC Adapter Rated input voltage AC100-240V 50/60Hz Output voltage DC 5V/MICRO USB Output current 1A 3.3 Operation Conditions Environment temperature +5 ~+40 Relative humidity 10%~80%RH Atmospheric pressure 50~106KPa 4.Use Method 4.1 Charge Put the curing light into the charger base, the blue light is shining one by one. When it is done, all of the blue lights are on.It takes about 3hours. Take care not to charge more than 7hours. Remove the adapter from the power supply after charging. Note: Can charge with the main unit socket also. When charging, theLED screen show CH; when done, the LED show FU 4.2 Operation Instruction 4.2.1Press M orTbutton to power on.Ifpress ON/OFF button, will light the Light source. 4.2.2 Set up Mode: P1(9W,≥2300mw/cm²) The actual measured value 2800mw/cm² P25W≥1200mw/cm² 4.2.3 Setup Time:P1--1/3/5s P2--6/10/15/20s 4.2.4Press ON/OFF button to light on the LED curing light. Ifsome wrong happened, the LED screen shows Er. 4.2.5 The main unit will power off by itselfif without any operation about 2minuts. Caution: the curing light can not be pointed at the patient's eyes while it is operating. If any accidents happen, go to the hospital immediately 5.Precautions 5.1 This machine is precise opticalequipment,it should use in the clean and dry place. 5.2 Remove adapter from the power supply after charge. 5.3 Do not touch the battery electrodes by any metal objects. 6.Cleaning & Sterilization 6.1 Clean Wipe the main unit with neutral detergent if needed. 6.2 Sterilization 6.2.1 The light source can be high pressure autoclaved. Autoclave it after each use with seal bag. 6.2.2Don't autoclave any parts(the main unit and charging base)other than those that can be subjected to autoclave sterilization. 6.2.3 Autoclave up to a max.135. It's recommended to autoclave for 20min at 121 or 15 min at 132. Notice: Don't use any solvent such as benzine and thinner for sterilization. 7.Transportation And Storage 1)Lay lightly during transportation, avoid strong shake 2) Storage condition: a. Ambiance temperature:-10~40b.Relative humidity:≤85% 8.Disposing product Please consult with dealer from whom you purchased it about waster despoil. 9.Warranty Manufacturer warrants its products to the original purchaser against defects in material and workmanship under normal practices of installation, use and servicing. This unit is guaranteed for its designated use against original defects in materials and workmanship for a period of 12 months from date of purchasing. *********************************************************************************************************************
LY-C240:
Feature:
1.Super 10W high power LED bulb.
2.360° rotating light source, 90° right angle illumination. 3.The 3 mm resin can be cured by strong light for 1 second, and the light intensity is greater than 2000 mw/cm2 4.The outer casing is made of environmentally friendly plastic material, which is beautiful and practical. 5.Strong light, pulse, fade-on three working mode selection, 1~40 seconds working time. Parameters: Packing specification:10.25*6.5*2.56in Net Weight:26.1 oz Gross Weight:28.2oz Output voltage:110v-220VAC, 50-60HZ Output voltage:DC5V Battery: Lithium ion battery Capability of battery:2200mah Battery voltage:3.7V Suitable temperature:5°~50°C Relative humidity:≤80% Solidify time and depth:1s/3mm Light wavelength:420-480nm Light intensity:2100 mw/cm2 Package Included: Subject*1 Power adapter*1 Charging base*1 Instruction manual*1 *********************************************************************************************************************
LY B200-B:
Cure Light covered by ABS painting
5W big power LED Cure Light High articulation optical fiber Cure Lamp Working models:strong Automatic standby and shut down Low Battery alert Large-capacity lithium battery Wireless curing lamp Solidify all brands of resin materials Technology data: Capacity of battery:2200mA/h3.7v Working voltage : AC100-240V 50-60Hz Wavelength: 420-480 nm Light power: more than 1500mw/cm2 Solidification time and depth: 5s/3mm *********************************************************************************************************************
i cure 1Second Curing Light
Features: 1. Two working modes: High, Norm 2. Time setting : 3. High: 1S, 3S 4. Norm:5S,10S,15S,20S 5. Constant light intensity. The solidification effect is not affected by the consumption of remaining power. 6. Large capacity battery. A full charge can be used for more than 400 times continuously under 10s working lime mode. 7. Principle and Application 8. Aadopts the principle of ray radiation to solidify the light-sensitive resin by shooting at it in a short time. 9. This product is used for dentistry. It has the function of accelerating 10. Basic Technical Specifications 11. Size: 250mmx180mmx64mm 12. Net weight: 320g 13. The components of machine: see the packing list. Adapter: classified by power supply The power supply by the rechargeable battery. Rechargeable Lithium battery: Battery model: JW-Y-1.5,Battery capacity: 1500mAh Battery has over-voltage, over current and short circuit protection Adapter(charge) Adapter input: AC100-240V 50Hz/60Hz Output: DC5V 1A Built-in fuse: T1A250V Light source: 5W high power blue light LED Wave length: 385-515nm Class: class I AEL:3.9x10-3J Check method: When operate machine properly, LED luminous means LED is in good condition. The wavelength of our curing light machine can match with dental resin material which are commonly used on dinical, such as 3M and Dentsply. 385 nm to 515 nm (blue light) wavelength range of radiation: not less than 250 mw/cm2. Work condition: Environment temperature: +SOC to+400C Relative humidity: 30%-75% Atmosphere pressure: 70kPa to1 06kPa Operation 1. Press the mode button to set the working mode, the corresponding indicator will on when a mode set. 2. High:2300-2500 mw/cm2 3. Norm:1000-1200 mw/cm2 4. Press the time button to set the solidifying time: 5. High :18,38 6. Norm:58, 108, 158, 208 the solidifying time *********************************************************************************************************************
G1 Curing Light( Blue /Silver/Black/Red)
1. LED Screen，high quality plastic handle. 2. Noiseless and no vibration when working 3. Lithium battery with large capacity 4. Three Modes: Gradually mode/Flashing mode/All light mode 5. Automatically power down: It will be turned automatically off automatically without pressing button for 3 minutes. 6. Solidification time is :40s. Every ten seconds, sound signal to remind operator. The length of work time can be controlled freely. 7. lt has self-protection against exceeding heat after continuous long time work that p o w e r – off by itself. After the temperature is normal, operator can use it again. 8. The LED is longevity. Cold light source, no fan. Avoid the infection, cause of air movement. Packing Size: 210*148*71 mm(unit) Packing weight: 420g Wavelength: 440-480nm Light Intensity: 5W≥1200mw/c㎡ Input Voltage: 100-240V 50-60HZ Battery Capacity: DC3.7v 2200mAh Solidification Effect:5s/3mm Production Display： |
