Feature:
1.Soldering iron part using YIHUA heater, heating up rapidly, temperature stability, long service life; antistatic design to prevent electrostatic damage to delicate SMD components.
2.The machine has a self-test function, full intelligent over-temperature, short-circuit, open circuit, overload and fault display and protection functions.
3.853AA preheating station using the user-friendly design, the cover affixed with a high-temperature, insulated protection pads to prevent scalding operation. The stent uses magnetic induction technology, card board bracket to prevent protective pads suck hood above, can rotate 360 degrees, flexible card board, it is suitable for the circuit boards of different shapes and sizes.
4.853AA temperature correction function-to adapt to the environmental impact, or replace the heating elements, soldering iron tips etc. spare parts caused by temperature deviation, can use this function calibration temperature. The correction temperature range is -50 °C ~ +50 °C.
5.853AA has Celsius / Fahrenheit temperature display function meet different market needs to design the temperature display mode, you can choose under customary interest.
Data:
Voltage : AC110V/220C±5%
Max power consumption: 1200W
Hot Air Reworks parts
Airflow type brushless fan spiral out wind
Air Flow :130L/min
Temperature Stability 100 °c -480 °c /212 °F ~896 °F
Display Type LED
Handle cable length ≥100cm
Soldering Iron parts:
Temperature Range 200 °c -480 °c /392°F~896 °F
Soldering iron heater
Solder iron holder blue Ferro-alloy iron holder
Soldering iron handle Blue iron handle
Temperature Stability ±1°c
Tip of ground voltage <2mV
Tip ground impedance <2 ohm
Display Type LED
Handle cable length ≥100cm
Goods weight 5.54kg/pcs
General Usage
1). Suitable for de-soldering and soldering BGA, SOIC, CHIP, QFP, PLCC package SMD IC,
Particularly suitable for de-soldering BGA module, computer motherboard north and south bridge,
all kinds of mobile phone motherboard SMT IC and LED lights.
2). Shrinking, Paint drying, adhesive removal, thawing, warming, Plastic welding etc.
Preheating station parts
Temperature Range : 50~ 300 °c or 50~400 °c /152~572 °F or 152~752 °F
Temperature Stability: ±2 °c
Display Type : LED
Area :120*120mm
Package included:
1 x 853AA Soldering Station Machine
1 x Hot Air Gun
1 x Hot Air Gun stand
1XHot Air Gun Heater
4 x hot air nozzle
1XIC Extractor
1XBrush
1.Soldering iron part using YIHUA heater, heating up rapidly, temperature stability, long service life; antistatic design to prevent electrostatic damage to delicate SMD components.
2.The machine has a self-test function, full intelligent over-temperature, short-circuit, open circuit, overload and fault display and protection functions.
3.853AA preheating station using the user-friendly design, the cover affixed with a high-temperature, insulated protection pads to prevent scalding operation. The stent uses magnetic induction technology, card board bracket to prevent protective pads suck hood above, can rotate 360 degrees, flexible card board, it is suitable for the circuit boards of different shapes and sizes.
4.853AA temperature correction function-to adapt to the environmental impact, or replace the heating elements, soldering iron tips etc. spare parts caused by temperature deviation, can use this function calibration temperature. The correction temperature range is -50 °C ~ +50 °C.
5.853AA has Celsius / Fahrenheit temperature display function meet different market needs to design the temperature display mode, you can choose under customary interest.
Data:
Voltage : AC110V/220C±5%
Max power consumption: 1200W
Hot Air Reworks parts
Airflow type brushless fan spiral out wind
Air Flow :130L/min
Temperature Stability 100 °c -480 °c /212 °F ~896 °F
Display Type LED
Handle cable length ≥100cm
Soldering Iron parts:
Temperature Range 200 °c -480 °c /392°F~896 °F
Soldering iron heater
Solder iron holder blue Ferro-alloy iron holder
Soldering iron handle Blue iron handle
Temperature Stability ±1°c
Tip of ground voltage <2mV
Tip ground impedance <2 ohm
Display Type LED
Handle cable length ≥100cm
Goods weight 5.54kg/pcs
General Usage
1). Suitable for de-soldering and soldering BGA, SOIC, CHIP, QFP, PLCC package SMD IC,
Particularly suitable for de-soldering BGA module, computer motherboard north and south bridge,
all kinds of mobile phone motherboard SMT IC and LED lights.
2). Shrinking, Paint drying, adhesive removal, thawing, warming, Plastic welding etc.
Preheating station parts
Temperature Range : 50~ 300 °c or 50~400 °c /152~572 °F or 152~752 °F
Temperature Stability: ±2 °c
Display Type : LED
Area :120*120mm
Package included:
1 x 853AA Soldering Station Machine
1 x Hot Air Gun
1 x Hot Air Gun stand
1XHot Air Gun Heater
4 x hot air nozzle
1XIC Extractor
1XBrush
1X User manual
