Produkt Beschreibung:
-Name: 1100W Mini Tragbare Klimaanlage Kostenloser Installation USB Schnelle Lade Fernbedienung
-Material: Polypropylen (PP)
-Farbe: Weiß
-Nennspannung/frequenz:220V/50Hz
-Kühlleistung: 1100W
-Heizung kapazität: 800W
-Nennstrom: kühlung 1,6 A/heizung 1,7 EIN
-Nennleistung: kühlung/heizung: 360W
-Maximale eingangs strom: 2A
-Maximale eingangs leistung: 440W
-Maximale arbeitsdruck auf die saug seite/abgas seite: 0.05/1,25 MPa
-Maximale zulässige druck auf niederdruck seite/hochdruck seite: 0.05/1,25 MPa
-Die maximale arbeitsdruck der wärme tauscher: 1. 78MPA
-Zirkulierende luft volumen: 80 m/h
-Körper größe: 460x255x230mm
-Lärm: ≤ 38dB(A)
-Anti-schock schutz kategorie: Klasse I
-Kältemittel: R134a/120g
Eigenschaften:
Freies installation, einfach zu installieren, bequem zu bedienen
Schnelle kühlung
USB schnelle ladung
Unabhängige entfeuchtung
Intelligente timing
Nacht beleuchtung
Kleine, leicht zu tragen
Touch fernbedienung
Geräuscharm, frieden von geist und schlaf
Niedrigen verbrauch, power saving, umweltschutz
Anwendung: Schlafsaal/Outdoor Sentry/Büro/Öffentliche Schlafsaal
Wie zu verwenden (Anweisungen):
● Stecker die stecker in die standard jack, und wenn die “--” in der mitte der anzeige licht ist auf, drücken sie die power schalter zu starten. Drücken sie die “Zeit 1” und “Zeit +” tasten, um die temperatur sie wollen. Die temperatur kann befahren werden von 17 °C zu 35 °C. Die digitale blinkt. Nach 3 sekunden, die computer automatisch aufzeichnungen und die system standardwerte nach dem booten. °.
● Drücken sie die zeit-taste, um die arbeitszeit der maschine. Von 1 zu 12 stunden, es können eingestellt werden zyklisch. Jeder zeit sie drücken sie es, es wird erhöhen durch eine stunde. Wenn die maschine arbeitet, bis die zeit sie set, wird es automatisch zu stoppen. Die system standardwerte zu 9 stunden.
● Es ist am besten nicht zu verwenden die maschine für mehr als 10 stunden pro zeit. Bitte lassen sie die maschine haben eine bestimmte rest zeit. Wenn die temperatur zu hoch ist, die kompressor wird nehmen eine pause und dann starten automatisch. Das ist normal. Es ist keine spezielle situation. Verwenden sie bitte die maschine mit moskito netze!
● Überprüfen wenn die wasser outlet rohr ist blockiert durch schutt. Wenn es ist blockiert, bitte klar die schutt zu gewährleisten, dass die kondensiert wasser innen können fluss reibungslos. Zusätzlich, setzen nur die eimer unter die rohr und fangen die kondensiert wasser. Wenn die wasser oberfläche ist nahe dem ende der die wasser outlet, bitte dump es in zeit.
● Setzen ein hocker auf die seite der bett, setzen die maschine flach auf die top, stellen sie die höhe der maschine, nur setzen es in die gehäuse der moskitonetz. Hinweis: das ende der luft-gefüllt ende ist eingesetzt in die sommer, und das ende der heizung ist platziert in die winter.. Zur gleichen zeit, die outlet rohr nächsten zu es ist ausgesetzt.
● Wenn sie müssen wärme up, können sie es verwenden, sobald sie es ändern.
● Auspuffrohr installation: installieren die joint der auspuffrohr auf dem platz port der air outlet. Die wärme rohr sollte glatt sein nach oben. Tun nicht abzulenken oder drehen die 90 grad sharps biegen zu erleichtern die entladung von heißer luft.
Paket Enthalten:
1 x klimaanlage
1 x fernbedienung
1 x Kupfer draht stecker
Warnung:
● Die heiße luft outlet der wichtigsten einheit ist ≥ 0,6 meter entfernt von der wand.
● Nach die maschine ist gekauft zurück, bitte lassen sie es stehen für 2 stunden und dann drehen es auf. Nach jeder haltestelle, bitte warten sie mindestens 5 minuten vor dem drehen es zurück auf.
● Tun nicht verwenden eine stick oder die wie zu verlängern in die klimaanlage. Die air outlet ist sehr wahrscheinlich zu unfällen führen, wenn die wind turbine ist läuft mit hoher geschwindigkeit.
● Tun nicht erlauben moskito netze oder andere einzelteile zu block die air outlet der maschine in die moskito net. Die air outlet der maschine außerhalb der moskitonetz ist mindestens 60 cm weg von der wand.
● Tun nicht spülen mit wasser, es kann einen elektrischen schlag verursachen, kurzschluss, etc., wischen sie die klimaanlage mit einem weichen, trockenen tuch.
● Verwenden sie nicht die folgenden artikel: heißer wasser (≥ 40 °C) verwenden können die wasser heizung zu verformen und verblassen die klimaanlage, benzin, farbe, benzol und polieren mittel, etc. diese artikel werden verformen und scratch die klimaanlage.
● Tun nicht lassen sie die kalte luft blasen direkt auf die körper für eine lange zeit, die kann verursachen körperliche beschwerden oder beschädigung gesundheit.
● Tun nicht klettern oder auszusetzen die stapel auf die klimaanlage für eine lange zeit. Wenn die maschine fällt über oder die artikel fällt, kann es zu verletzungen und andere unfälle.
● Reinigen, wenn nicht mit der klimaanlage für eine lange zeit. Vor wartung, bitte ziehen sie die netzkabel sicherheit zu gewährleisten.