Important information about the offer:The offered goods come from returns within the right of withdrawal. The condition of the device is comparable to new goods. The packaging may be damaged. You will receive an invoice, have a 30-day right of withdrawal and the statutory warranty of 2 years. Important information about this offer:The offered goods come from returns within the right of withdrawal.The condition of the device is comparable to virgin goods. The packaging may be damaged. You will receive an invoice, have a 30-day right of withdrawal and the statutory warranty of 2 years. |
The FiiO UTWS5 in summary: There's a new contender among True Wireless Bluetooth headphone amplifiers! The FiiO UTWS5 can not only be combined with almost any headphones on the market thanks to the MMCX or 0.78 mm 2-pin connection - it also provides them with crystal-clear sound and power. And with Bluetooth 5.2, a high data rate and range are guaranteed.
The FiiO UTWS5 is the first true wireless receiver to use an AK4332 DAC. The result is a lower background noise and up to 40% more output power
Do you have excellent-sounding and well-fitting wired in-ear headphones that you definitely don't want to give up? On the other hand, you also appreciate wireless headphones with excellent sound, but this is not possible with your headphones?
With the true wireless Bluetooth headphone amplifier FiiO UTWS5, exactly what you want is possible: high-quality sound, the usual wearing comfort and wireless freedom. How? We will explain that to you in the next section.
Many high-quality headphones are no longer permanently connected to the corresponding headphone cable, but via a standardized connector. On the one hand, these are the MMCX connector, which works like a kind of “snap lock”. On the other hand, the 0.78 mm 2-pin connector, where the name says it all. The contact between the cable and the headphones is established via two small pins.
What was originally an idea to be able to quickly and easily swap the headphone cable if necessary, you get a completely new impetus with the FiiO UTWS5. Unplug the cable, dock the Bluetooth headphone amplifier and let the fun begin.
All you have to do is choose one of the two variants and off you go
Headphones are becoming increasingly sophisticated and power-hungry these days. No problem for the FiiO UTWS5, as the output power has been increased by up to 40% compared to the direct predecessor FiiO UTWS3 and at the same time the distortion values have been reduced even further.
Not only a better conversion of the music, but a significantly better voice quality through the new aptX Voice high-definition technology.
The third generation of TWS mirroring technology ensures permanently low latency and more stable connections through a variable connection of the earhooks to each other and to the source device.
Thanks to the Snapdragon technology, 96kHz/24Bit with low latency and aptX 32kHz calls are no problem for the true high-definition Bluetooth connection.
Supported are: SBC, AAC, Qualcomm aptX and Qualcomm aptX adaptive
The Bluetooth headphone amplifier FiiO UTWS5 is your mobile companion for every day and everywhere. Also during sports or in heavy rain; the UTWS5 does its job.
This is also confirmed by the official IPX4 certification, which once again underlines the high demands placed on the headphone amplifier.
Via the FiiO Controll or the FiiO Music App you have access to settings such as "Balance" and many other audio options as well as firmware updates.
Model designation: | FiiO UTWS5 |
Color: | Black |
Weight: | 122g |
rec. Headphone Impedance: | 16~100Ω |
Output power: | ≥54mW(16Ω / THD+N<1%) |
Frequency Response: | 10Hz~41kHz (-3dB) |
THD+N: | <0.002% (1kHz/32Ω/dbA) |
SNR: | ≥109dB (dbA) |
Max output current: | >2.9Vp-p |
Output Impedance: | <0.4Ω(32Ω) |
Crosstalk: | ≥86dB (1kHz/32Ω) |
Load: | DC 5V 1A |
Battery pack: | Ear hook:60mAh Charging case:800mAh |
Battery life: | >8h (AAC), the charging case is enough to charge the ear hooks 4 times |
Loading time: | Ear hooks ≤ 1.5h Charging case ≤ 2h |
Resolution: | 96kHz-24bit |
converter: | AK4332 |
Archive: | No |